mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 06:42:56 +00:00
412ae53aad
Work_92105 from Work Microwave is an LPC3250- based board with the following features: - 64MB or 128MB SDR DRAM - 1 GB SLC NAND, managed through MLC controller. - Ethernet - Ethernet + PHY SMSC8710 - I2C: - EEPROM (24M01-compatible) - RTC (DS1374-compatible) - Temperature sensor (DS620) - DACs (2 x MAX518) - SPI (through SSP interface) - Port expander MAX6957 - LCD display (HD44780-compatible), controlled through the port expander and DACs This board has SPL support, and uses the LPC32XX boot image format. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
54 lines
2.4 KiB
C
54 lines
2.4 KiB
C
/*
|
|
* Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _LPC32XX_CPU_H
|
|
#define _LPC32XX_CPU_H
|
|
|
|
/* LPC32XX Memory map */
|
|
|
|
/* AHB physical base addresses */
|
|
#define SLC_NAND_BASE 0x20020000 /* SLC NAND Flash registers base */
|
|
#define SSP0_BASE 0x20084000 /* SSP0 registers base */
|
|
#define SD_CARD_BASE 0x20098000 /* SD card interface registers base */
|
|
#define MLC_NAND_BASE 0x200A8000 /* MLC NAND Flash registers base */
|
|
#define DMA_BASE 0x31000000 /* DMA controller registers base */
|
|
#define USB_BASE 0x31020000 /* USB registers base */
|
|
#define LCD_BASE 0x31040000 /* LCD registers base */
|
|
#define ETHERNET_BASE 0x31060000 /* Ethernet registers base */
|
|
#define EMC_BASE 0x31080000 /* EMC configuration registers base */
|
|
|
|
/* FAB peripherals base addresses */
|
|
#define CLK_PM_BASE 0x40004000 /* System control registers base */
|
|
#define HS_UART1_BASE 0x40014000 /* High speed UART 1 registers base */
|
|
#define HS_UART2_BASE 0x40018000 /* High speed UART 2 registers base */
|
|
#define HS_UART7_BASE 0x4001C000 /* High speed UART 7 registers base */
|
|
#define RTC_BASE 0x40024000 /* RTC registers base */
|
|
#define GPIO_BASE 0x40028000 /* GPIO registers base */
|
|
#define MUX_BASE 0x40028100 /* MUX registers base */
|
|
#define WDT_BASE 0x4003C000 /* Watchdog timer registers base */
|
|
#define TIMER0_BASE 0x40044000 /* Timer0 registers base */
|
|
#define TIMER1_BASE 0x4004C000 /* Timer1 registers base */
|
|
#define UART_CTRL_BASE 0x40054000 /* UART control regsisters base */
|
|
|
|
/* APB peripherals base addresses */
|
|
#define UART3_BASE 0x40080000 /* UART 3 registers base */
|
|
#define UART4_BASE 0x40088000 /* UART 4 registers base */
|
|
#define UART5_BASE 0x40090000 /* UART 5 registers base */
|
|
#define UART6_BASE 0x40098000 /* UART 6 registers base */
|
|
#define I2C1_BASE 0x400A0000 /* I2C 1 registers base */
|
|
#define I2C2_BASE 0x400A8000 /* I2C 2 registers base */
|
|
|
|
/* External SDRAM Memory Bank base addresses */
|
|
#define EMC_DYCS0_BASE 0x80000000 /* SDRAM DYCS0 base address */
|
|
#define EMC_DYCS1_BASE 0xA0000000 /* SDRAM DYCS1 base address */
|
|
|
|
/* External Static Memory Bank base addresses */
|
|
#define EMC_CS0_BASE 0xE0000000
|
|
#define EMC_CS1_BASE 0xE1000000
|
|
#define EMC_CS2_BASE 0xE2000000
|
|
#define EMC_CS3_BASE 0xE3000000
|
|
|
|
#endif /* _LPC32XX_CPU_H */
|