mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
606576d54b
This patch adds basic support for the Marvell A375 eval board. Tested are the following interfaces: - I2C - SPI - SPI NOR - Ethernet (mvpp2), port 0 & 1 Currently the A375 SerDes and DDR3 init code is not intergrated. So the SPL U-Boot is not fully functional. Right now, this A375 mainline U-Boot can only be used by chainloading it via the original Marvell U-Boot. This can be done via this command: => tftpboot 00800000 a375/u-boot-dtb.bin;go 00800000 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
91 lines
2.8 KiB
C
91 lines
2.8 KiB
C
/*
|
|
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Those values and defines are taken from the Marvell U-Boot version
|
|
* "u-boot-2013.01-2014_T2.0" for the board Armada 375 DB-88F6720
|
|
*/
|
|
#define DB_88F6720_MPP0_7 0x00020020 /* SPI */
|
|
#define DB_88F6720_MPP8_15 0x22000022 /* SPI , I2C */
|
|
#define DB_88F6720_MPP16_23 0x22222222 /* UART, TDM*/
|
|
#define DB_88F6720_MPP24_31 0x33333333 /* SDIO, SPI1*/
|
|
#define DB_88F6720_MPP32_39 0x04403330 /* SPI1, External SMI */
|
|
#define DB_88F6720_MPP40_47 0x22002044 /* UART1, GE0, SATA0 LED */
|
|
#define DB_88F6720_MPP48_55 0x22222222 /* GE0 */
|
|
#define DB_88F6720_MPP56_63 0x04444422 /* GE0 , LED_MATRIX, GPIO */
|
|
#define DB_88F6720_MPP64_67 0x014 /* LED_MATRIX, SATA1 LED*/
|
|
|
|
#define DB_88F6720_GPP_OUT_ENA_LOW 0xFFFFFFFF
|
|
#define DB_88F6720_GPP_OUT_ENA_MID 0x7FFFFFFF
|
|
#define DB_88F6720_GPP_OUT_ENA_HIGH 0xFFFFFFFF
|
|
#define DB_88F6720_GPP_OUT_VAL_LOW 0x0
|
|
#define DB_88F6720_GPP_OUT_VAL_MID BIT(31) /* SATA Power output enable */
|
|
#define DB_88F6720_GPP_OUT_VAL_HIGH 0x0
|
|
#define DB_88F6720_GPP_POL_LOW 0x0
|
|
#define DB_88F6720_GPP_POL_MID 0x0
|
|
#define DB_88F6720_GPP_POL_HIGH 0x0
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
/* Configure MPP */
|
|
writel(DB_88F6720_MPP0_7, MVEBU_MPP_BASE + 0x00);
|
|
writel(DB_88F6720_MPP8_15, MVEBU_MPP_BASE + 0x04);
|
|
writel(DB_88F6720_MPP16_23, MVEBU_MPP_BASE + 0x08);
|
|
writel(DB_88F6720_MPP24_31, MVEBU_MPP_BASE + 0x0c);
|
|
writel(DB_88F6720_MPP32_39, MVEBU_MPP_BASE + 0x10);
|
|
writel(DB_88F6720_MPP40_47, MVEBU_MPP_BASE + 0x14);
|
|
writel(DB_88F6720_MPP48_55, MVEBU_MPP_BASE + 0x18);
|
|
writel(DB_88F6720_MPP56_63, MVEBU_MPP_BASE + 0x1c);
|
|
writel(DB_88F6720_MPP64_67, MVEBU_MPP_BASE + 0x20);
|
|
|
|
/* Configure GPIO */
|
|
/* Set GPP Out value */
|
|
writel(DB_88F6720_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
|
|
writel(DB_88F6720_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
|
|
writel(DB_88F6720_GPP_OUT_VAL_HIGH, MVEBU_GPIO2_BASE + 0x00);
|
|
|
|
/* Set GPP Polarity */
|
|
writel(DB_88F6720_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
|
|
writel(DB_88F6720_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
|
|
writel(DB_88F6720_GPP_POL_HIGH, MVEBU_GPIO2_BASE + 0x0c);
|
|
|
|
/* Set GPP Out Enable */
|
|
writel(DB_88F6720_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
|
|
writel(DB_88F6720_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
|
|
writel(DB_88F6720_GPP_OUT_ENA_HIGH, MVEBU_GPIO2_BASE + 0x04);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: Marvell DB-88F6720\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
cpu_eth_init(bis); /* Built in controller(s) come first */
|
|
return pci_eth_init(bis);
|
|
}
|