mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 10:30:32 +00:00
b0b8086898
The NanoPC-T6 is a Rockchip RK3588 based SBC by FriendlyElec.
There are four variants depending on the DRAM size: 4G/32GB eMMC,
8G/64GB eMMC, 16G/16MB SPI NOR, and 16G/256GB eMMC/16MB SPI NOR
Specifications:
CPU: Rockchip RK3588, 4x Cortex-A76 (up to 2.4GHz)
+ 4x Cortex-A55 (up to 1.8GHz)
GPU: Mali-G610 MP4
VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder,
4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder
NPU: 6TOPs, supports INT4/INT8/INT16/FP16
RAM: 64-bit 4GB/8GB/16GB LPDDR4X at 2133MHz
eMMC: 0GB/32GB/64GB/256GB HS400
MicroSD Slot: MicroSD SDR104
PCIe 3.0: M.2 M-Key x1, PCIe 3.0 x4 for NVMe SSDs up to 2,500 MB/s
Ethernet: PCIe 2.5G 2x Ethernet (RTL8125BG)
PCIe 2.1: M.2 E-Key x1, PCIe 2.1 x1 and USB2.0 Host,
supports M.2 WiFi and Bluetooth
4G Module: MiniPCIe x1, MicroSIM Card Slot x1
Audio Out: 3.5mm jack for stereo headphone output
Audio In: 2.0mm PH-2A connector for analog microphone input
Video Input: standard HDMI input port, up to 4Kp60
2x 4-lane MIPI-CSI, compatible with MIPI V1.2
Video Output: 2x standard HDMI output ports compatible with HDMI2.1,
HDMI2.0, and HDMI1.4
2x 4-lane MIPI-DSI, compatible with MIPI DPHY 2.0 or CPHY 1.1
USB-A: USB 3.0, Type A
USB-C: Full function USB Type‑C port, DP display up to 4Kp60, USB 3.0
40-pin 2.54mm header connector: up to 2x SPIs, 6x UARTs, 1x I2Cs,
8x PWMs, 2x I2Ss, 28x GPIOs
Debug UART: 3 Pin 2.54mm header, 3V level, 1500000bps
Onboard IR receiver: 38KHz carrier frequency
RTC Battery: 2 Pin 1.27/1.25mm RTC battery connector for low power
RTC IC HYM8563TS
5V Fan connector
Working Temperature: 0C to 70C
Power: 5.5*2.1mm DC Jack, 12VDC input
Dimensions: 110x80x1.6mm (without case) / 86x114.5x30mm (with case)
Kernel commits:
893c17716d0c ("arm64: dts: rockchip: Add NanoPC T6")
a721e28dfad2 ("arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support")
ac76b786cc37 ("arm64: dts: rockchip: Add NanoPC T6 PCIe e-key support")
Signed-off-by: John Clark <inindev@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
916 lines
19 KiB
Text
916 lines
19 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
|
* Copyright (c) 2023 Thomas McKahan
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/usb/pd.h>
|
|
#include "rk3588.dtsi"
|
|
|
|
/ {
|
|
model = "FriendlyElec NanoPC-T6";
|
|
compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588";
|
|
|
|
aliases {
|
|
mmc0 = &sdhci;
|
|
mmc1 = &sdmmc;
|
|
serial2 = &uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
sys_led: led-0 {
|
|
gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
label = "system-led";
|
|
linux,default-trigger = "heartbeat";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sys_led_pin>;
|
|
};
|
|
|
|
usr_led: led-1 {
|
|
gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
|
label = "user-led";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usr_led_pin>;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hp_det>;
|
|
|
|
simple-audio-card,name = "realtek,rt5616-codec";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
|
|
simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
|
|
simple-audio-card,hp-pin-name = "Headphones";
|
|
|
|
simple-audio-card,widgets =
|
|
"Headphone", "Headphones",
|
|
"Microphone", "Microphone Jack";
|
|
simple-audio-card,routing =
|
|
"Headphones", "HPOL",
|
|
"Headphones", "HPOR",
|
|
"MIC1", "Microphone Jack",
|
|
"Microphone Jack", "micbias1";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s0_8ch>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&rt5616>;
|
|
};
|
|
};
|
|
|
|
vcc12v_dcin: vcc12v-dcin-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc12v_dcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
/* vcc5v0_sys powers peripherals */
|
|
vcc5v0_sys: vcc5v0-sys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
/* vcc4v0_sys powers the RK806, RK860's */
|
|
vcc4v0_sys: vcc4v0-sys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc4v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <4000000>;
|
|
regulator-max-microvolt = <4000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc-1v1-nldo-s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
vin-supply = <&vcc4v0_sys>;
|
|
};
|
|
|
|
vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3_pcie20";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
};
|
|
|
|
vbus5v0_typec: vbus5v0-typec-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&typec5v_pwren>;
|
|
regulator-name = "vbus5v0_typec";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_m2_1_pwren>;
|
|
regulator-name = "vcc3v3_pcie2x1l0";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_m2_0_pwren>;
|
|
regulator-name = "vcc3v3_pcie30";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
};
|
|
|
|
&combphy0_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy1_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy2_psu {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_b0{
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
|
};
|
|
|
|
&cpu_b1{
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
|
};
|
|
|
|
&cpu_b2{
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
|
};
|
|
|
|
&cpu_b3{
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
|
};
|
|
|
|
&gpio0 {
|
|
gpio-line-names = /* GPIO0 A0-A7 */
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
/* GPIO0 B0-B7 */
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
/* GPIO0 C0-C7 */
|
|
"", "", "", "",
|
|
"HEADER_10", "HEADER_08", "HEADER_32", "",
|
|
/* GPIO0 D0-D7 */
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpio1 {
|
|
gpio-line-names = /* GPIO1 A0-A7 */
|
|
"HEADER_27", "HEADER_28", "", "",
|
|
"", "", "", "HEADER_15",
|
|
/* GPIO1 B0-B7 */
|
|
"HEADER_26", "HEADER_21", "HEADER_19", "HEADER_23",
|
|
"HEADER_24", "HEADER_22", "", "",
|
|
/* GPIO1 C0-C7 */
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
/* GPIO1 D0-D7 */
|
|
"", "", "", "",
|
|
"", "", "HEADER_05", "HEADER_03";
|
|
};
|
|
|
|
&gpio2 {
|
|
gpio-line-names = /* GPIO2 A0-A7 */
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
/* GPIO2 B0-B7 */
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
/* GPIO2 C0-C7 */
|
|
"", "CSI1_11", "CSI1_12", "",
|
|
"", "", "", "",
|
|
/* GPIO2 D0-D7 */
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&gpio3 {
|
|
gpio-line-names = /* GPIO3 A0-A7 */
|
|
"HEADER_35", "HEADER_38", "HEADER_40", "HEADER_36",
|
|
"HEADER_37", "", "DSI0_12", "",
|
|
/* GPIO3 B0-B7 */
|
|
"HEADER_33", "DSI0_10", "HEADER_07", "HEADER_16",
|
|
"HEADER_18", "HEADER_29", "HEADER_31", "HEADER_12",
|
|
/* GPIO3 C0-C7 */
|
|
"DSI0_08", "DSI0_14", "HEADER_11", "HEADER_13",
|
|
"", "", "", "",
|
|
/* GPIO3 D0-D7 */
|
|
"", "", "", "",
|
|
"", "DSI1_10", "", "";
|
|
};
|
|
|
|
&gpio4 {
|
|
gpio-line-names = /* GPIO4 A0-A7 */
|
|
"DSI1_08", "DSI1_14", "", "DSI1_12",
|
|
"", "", "", "",
|
|
/* GPIO4 B0-B7 */
|
|
"", "", "", "",
|
|
"", "", "", "",
|
|
/* GPIO4 C0-C7 */
|
|
"", "", "", "",
|
|
"CSI0_11", "CSI0_12", "", "",
|
|
/* GPIO4 D0-D7 */
|
|
"", "", "", "",
|
|
"", "", "", "";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
status = "okay";
|
|
|
|
vdd_cpu_big0_s0: regulator@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-name = "vdd_cpu_big0_s0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
vin-supply = <&vcc4v0_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_big1_s0: regulator@43 {
|
|
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
|
reg = <0x43>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-name = "vdd_cpu_big1_s0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
vin-supply = <&vcc4v0_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
vdd_npu_s0: regulator@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-name = "vdd_npu_s0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <2300>;
|
|
vin-supply = <&vcc4v0_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c6 {
|
|
clock-frequency = <200000>;
|
|
status = "okay";
|
|
|
|
fusb302: typec-portc@22 {
|
|
compatible = "fcs,fusb302";
|
|
reg = <0x22>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-0 = <&usbc0_int>;
|
|
pinctrl-names = "default";
|
|
vbus-supply = <&vbus5v0_typec>;
|
|
|
|
connector {
|
|
compatible = "usb-c-connector";
|
|
data-role = "dual";
|
|
label = "USB-C";
|
|
power-role = "dual";
|
|
try-power-role = "sink";
|
|
source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
|
|
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
op-sink-microwatt = <1000000>;
|
|
};
|
|
};
|
|
|
|
hym8563: rtc@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "hym8563";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hym8563_int>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&i2c7 {
|
|
clock-frequency = <200000>;
|
|
status = "okay";
|
|
|
|
rt5616: codec@1b {
|
|
compatible = "realtek,rt5616";
|
|
reg = <0x1b>;
|
|
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
|
clock-names = "mclk";
|
|
#sound-dai-cells = <0>;
|
|
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
|
assigned-clock-rates = <12288000>;
|
|
|
|
port {
|
|
rt5616_p0_0: endpoint {
|
|
remote-endpoint = <&i2s0_8ch_p0_0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* connected with MIPI-CSI1 */
|
|
};
|
|
|
|
&i2c8 {
|
|
pinctrl-0 = <&i2c8m2_xfer>;
|
|
};
|
|
|
|
&i2s0_8ch {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s0_lrck
|
|
&i2s0_mclk
|
|
&i2s0_sclk
|
|
&i2s0_sdi0
|
|
&i2s0_sdo0>;
|
|
status = "okay";
|
|
|
|
i2s0_8ch_p0: port {
|
|
i2s0_8ch_p0_0: endpoint {
|
|
dai-format = "i2s";
|
|
mclk-fs = <256>;
|
|
remote-endpoint = <&rt5616_p0_0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie2x1l0 {
|
|
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc_3v3_pcie20>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie2_0_rst>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie2x1l1 {
|
|
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie2_1_rst>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie2x1l2 {
|
|
reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc_3v3_pcie20>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie2_2_rst>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie30phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie3x4 {
|
|
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
gpio-leds {
|
|
sys_led_pin: sys-led-pin {
|
|
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
usr_led_pin: usr-led-pin {
|
|
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
headphone {
|
|
hp_det: hp-det {
|
|
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hym8563 {
|
|
hym8563_int: hym8563-int {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
pcie {
|
|
pcie2_0_rst: pcie2-0-rst {
|
|
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
pcie2_1_rst: pcie2-1-rst {
|
|
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
pcie2_2_rst: pcie2-2-rst {
|
|
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
pcie_m2_0_pwren: pcie-m20-pwren {
|
|
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
pcie_m2_1_pwren: pcie-m21-pwren {
|
|
rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
typec5v_pwren: typec5v-pwren {
|
|
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
usbc0_int: usbc0-int {
|
|
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-0 = <&pwm1m1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&avcc_1v8_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
no-sdio;
|
|
no-sd;
|
|
non-removable;
|
|
max-frequency = <200000000>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
max-frequency = <200000000>;
|
|
no-sdio;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc_3v3_s3>;
|
|
vqmmc-supply = <&vccio_sd_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi2 {
|
|
status = "okay";
|
|
assigned-clocks = <&cru CLK_SPI2>;
|
|
assigned-clock-rates = <200000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
|
num-cs = <1>;
|
|
|
|
pmic@0 {
|
|
compatible = "rockchip,rk806";
|
|
spi-max-frequency = <1000000>;
|
|
reg = <0x0>;
|
|
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
|
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
|
|
|
vcc1-supply = <&vcc4v0_sys>;
|
|
vcc2-supply = <&vcc4v0_sys>;
|
|
vcc3-supply = <&vcc4v0_sys>;
|
|
vcc4-supply = <&vcc4v0_sys>;
|
|
vcc5-supply = <&vcc4v0_sys>;
|
|
vcc6-supply = <&vcc4v0_sys>;
|
|
vcc7-supply = <&vcc4v0_sys>;
|
|
vcc8-supply = <&vcc4v0_sys>;
|
|
vcc9-supply = <&vcc4v0_sys>;
|
|
vcc10-supply = <&vcc4v0_sys>;
|
|
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
|
vcc12-supply = <&vcc4v0_sys>;
|
|
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
|
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
|
vcca-supply = <&vcc4v0_sys>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
rk806_dvs1_null: dvs1-null-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs2_null: dvs2-null-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs3_null: dvs3-null-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
regulators {
|
|
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_gpu_s0";
|
|
regulator-enable-ramp-delay = <400>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_cpu_lit_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_log_s0: dcdc-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_log_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-init-microvolt = <750000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_vdenc_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_ddr_s0: dcdc-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_ddr_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <850000>;
|
|
};
|
|
};
|
|
|
|
vdd2_ddr_s3: dcdc-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vdd2_ddr_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_2v0_pldo_s3: dcdc-reg7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_2v0_pldo_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <2000000>;
|
|
};
|
|
};
|
|
|
|
vcc_3v3_s3: dcdc-reg8 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vddq_ddr_s0: dcdc-reg9 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vddq_ddr_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8_s3: dcdc-reg10 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
avcc_1v8_s0: pldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "avcc_1v8_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8_s0: pldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
avdd_1v2_s0: pldo-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "avdd_1v2_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v3_s0: pldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vcc_3v3_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_sd_s0: pldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vccio_sd_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
pldo6_s3: pldo-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "pldo6_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd_0v75_s3: nldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdd_0v75_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vdd_ddr_pll_s0: nldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdd_ddr_pll_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <850000>;
|
|
};
|
|
};
|
|
|
|
avdd_0v75_s0: nldo-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "avdd_0v75_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_0v85_s0: nldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdd_0v85_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_0v75_s0: nldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdd_0v75_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-0 = <&uart2m0_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy2_host {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy3_host {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|