mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 06:00:43 +00:00
2e5167ccad
By now, the majority of architectures have working relocation support, so the few remaining architectures have become exceptions. To make this more obvious, we make working relocation now the default case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC. Signed-off-by: Wolfgang Denk <wd@denx.de> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
201 lines
6.1 KiB
Text
201 lines
6.1 KiB
Text
To make relocation on arm working, the following changes are done:
|
|
|
|
At arch level: add linker flag -pie
|
|
|
|
This causes the linker to generate fixup tables .rel.dyn and .dynsym,
|
|
which must be applied to the relocated image before transferring
|
|
control to it.
|
|
|
|
These fixups are described in the ARM ELF documentation as type 23
|
|
(program-base-relative) and 2 (symbol-relative)
|
|
|
|
At cpu level: modify linker file and add a relocation and fixup loop
|
|
|
|
the linker file must be modified to include the .rel.dyn and .dynsym
|
|
tables in the binary image, and to provide symbols for the relocation
|
|
code to access these tables
|
|
|
|
The relocation and fixup loop must be executed after executing
|
|
board_init_f at initial location and before executing board_init_r
|
|
at final location.
|
|
|
|
At board level:
|
|
|
|
dram_init(): bd pointer is now at this point not accessible, so only
|
|
detect the real dramsize, and store it in gd->ram_size. Bst detected
|
|
with get_ram_size().
|
|
|
|
TODO: move also dram initialization there on boards where it is possible.
|
|
|
|
Setup of the the bd_t dram bank info is done in the new function
|
|
dram_init_banksize() called after bd is accessible.
|
|
|
|
At lib level:
|
|
|
|
Board.c code is adapted from ppc code
|
|
|
|
At config level:
|
|
|
|
Undefine CONFIG_SYS_ARM_WITHOUT_RELOC
|
|
|
|
* WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING ** WARNING *
|
|
|
|
Boards which are not fixed to support relocation will be REMOVED!
|
|
|
|
Eventually, CONFIG_SYS_ARM_WITHOUT_RELOC will disappear and boards
|
|
which have to migrated to relocation will disappear too.
|
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
For boards which boot from nand_spl, it is possible to save one copy
|
|
if CONFIG_SYS_TEXT_BASE == relocation address! This prevents that uboot code
|
|
is copied again in relocate_code().
|
|
|
|
example for the tx25 board:
|
|
|
|
a) cpu starts
|
|
b) it copies the first page in nand to internal ram
|
|
(nand_spl_code)
|
|
c) end executes this code
|
|
d) this initialize CPU, RAM, ... and copy itself to RAM
|
|
(this bin must fit in one page, so board_init_f()
|
|
don;t fit in it ... )
|
|
e) there it copy u-boot to CONFIG_SYS_NAND_U_BOOT_DST and
|
|
starts this image @ CONFIG_SYS_NAND_U_BOOT_START
|
|
f) u-boot code steps through board_init_f() and calculates
|
|
the relocation address and copy itself to it
|
|
|
|
If CONFIG_SYS_TEXT_BASE == relocation address, the copying of u-boot
|
|
in f) could be saved.
|
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
TODO
|
|
|
|
- fill in bd_t infos (check)
|
|
- adapt all boards
|
|
|
|
- maybe adapt CONFIG_SYS_TEXT_BASE (this must be checked from board maintainers)
|
|
This *must* be done for boards, which boot from NOR flash
|
|
|
|
on other boards if CONFIG_SYS_TEXT_BASE = relocation baseaddr, this saves
|
|
one copying from u-boot code.
|
|
|
|
- new function dram_init_banksize() is actual board specific. Maybe
|
|
we make a weak default function in arch/arm/lib/board.c ?
|
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
Relocation with NAND_SPL (example for the tx25):
|
|
|
|
- cpu copies the first page from NAND to 0xbb000000 (IMX_NFC_BASE)
|
|
and start with code execution on this address.
|
|
|
|
- The First page contains u-boot code from u-boot:nand_spl/nand_boot_fsl_nfc.c
|
|
which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads
|
|
the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution
|
|
@CONFIG_SYS_NAND_U_BOOT_START
|
|
|
|
- This u-boot does no RAM init, nor CPU register setup. Just look
|
|
where it has to copy and relocate itself to this address. If
|
|
relocate address = CONFIG_SYS_TEXT_BASE (not the same, as the
|
|
CONFIG_SYS_TEXT_BASE from the nand_spl code), then there is no need
|
|
to copy, just go on with bss clear and jump to board_init_r.
|
|
|
|
-----------------------------------------------------------------------------
|
|
|
|
How ELF relocations 23 and 2 work.
|
|
|
|
TBC
|
|
|
|
-------------------------------------------------------------------------------------
|
|
|
|
Debugging u-boot in RAM:
|
|
(example on the qong board)
|
|
|
|
a) add in config.mk:
|
|
|
|
PLATFORM_CPPFLAGS += -DDEBUG
|
|
|
|
-----------------
|
|
|
|
b) start debugger
|
|
|
|
arm-linux-gdb u-boot
|
|
|
|
[hs@pollux u-boot]$ arm-linux-gdb u-boot
|
|
GNU gdb Red Hat Linux (6.7-2rh)
|
|
Copyright (C) 2007 Free Software Foundation, Inc.
|
|
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
|
|
This is free software: you are free to change and redistribute it.
|
|
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
|
|
and "show warranty" for details.
|
|
This GDB was configured as "--host=i686-pc-linux-gnu --target=arm-linux".
|
|
The target architecture is set automatically (currently arm)
|
|
..
|
|
(gdb)
|
|
|
|
-----------------
|
|
|
|
c) connect to target
|
|
|
|
target remote bdi10:2001
|
|
|
|
(gdb) target remote bdi10:2001
|
|
Remote debugging using bdi10:2001
|
|
0x8ff17f10 in ?? ()
|
|
(gdb)
|
|
|
|
-----------------
|
|
|
|
d) discard symbol-file
|
|
|
|
(gdb) symbol-file
|
|
Discard symbol table from `/home/hs/celf/u-boot/u-boot'? (y or n) y
|
|
No symbol file now.
|
|
(gdb)
|
|
|
|
-----------------
|
|
|
|
e) load new symbol table:
|
|
|
|
(gdb) add-symbol-file u-boot 0x8ff08000
|
|
add symbol table from file "u-boot" at
|
|
.text_addr = 0x8ff08000
|
|
(y or n) y
|
|
Reading symbols from /home/hs/celf/u-boot/u-boot...done.
|
|
(gdb) c
|
|
Continuing.
|
|
^C
|
|
Program received signal SIGSTOP, Stopped (signal).
|
|
0x8ff17f18 in serial_getc () at serial_mxc.c:192
|
|
192 while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
|
|
(gdb)
|
|
|
|
add-symbol-file u-boot 0x8ff08000
|
|
^^^^^^^^^^
|
|
get this address from u-boot debug printfs
|
|
|
|
U-Boot 2010.06-rc2-00009-gf77b8b8-dirty (Jun 22 2010 - 09:43:46)
|
|
|
|
U-Boot code: A0000000 -> A0058BAC BSS: -> A0061F10
|
|
CPU: Freescale i.MX31 at 398 MHz
|
|
Board: DAVE/DENX Qong
|
|
mon: FFFFFFFF gd->monLen: 00061F10
|
|
Top of RAM usable for U-Boot at: 90000000
|
|
LCD panel info: 640 x 480, 16 bit/pix
|
|
Reserving 600k for LCD Framebuffer at: 8ff6a000
|
|
Reserving 391k for U-Boot at: 8ff08000
|
|
^^^^^^^^
|
|
Reserving 1280k for malloc() at: 8fdc8000
|
|
Reserving 24 Bytes for Board Info at: 8fdc7fe8
|
|
Reserving 52 Bytes for Global Data at: 8fdc7fb4
|
|
New Stack Pointer is: 8fdc7fb0
|
|
RAM Configuration:
|
|
Bank #0: 80000000 256 MiB
|
|
relocation Offset is: eff08000
|
|
mon: 00058BAC gd->monLen: 00061F10
|
|
Now running in RAM - U-Boot at: 8ff08000
|
|
^^^^^^^^
|
|
|
|
Now you can use gdb as usual :-)
|