mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
b821e0db46
This adds support for the NanoPi R2S from FriendlyArm. Rockchip RK3328 SoC 1GB DDR4 RAM Gigabit Ethernet (WAN) Gigabit Ethernet (USB3) (LAN) USB 2.0 Host Port MicroSD slot Reset button WAN - LAN - SYS LED Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Kever Yang<kever.yang@rock-chips.com> |
||
|---|---|---|
| .. | ||
| evb-rk3328.c | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Introduction ============ RK3328 key features we might use in U-Boot: * CPU: ARMv8 64bit quad-core Cortex-A53 * IRAM: 36KB * DRAM: 4GB-16MB dual-channel * eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50 * SD/MMC: support SD 3.0, MMC 4.51 * USB: USB2.0 EHCI host port *2 * Display: RGB/HDMI/DP/MIPI/EDP evb key features: * regulator: pwm regulator for CPU B/L * PMIC: rk808 * debug console: UART2 In order to support Arm Trust Firmware(ATF), we need to use the miniloader from rockchip which: * do DRAM init * load and verify ATF image * load and verify U-Boot image Here is the step-by-step to boot to U-Boot on rk3328. Get the Source and prebuild binary ================================== > mkdir ~/evb_rk3328 > cd ~/evb_rk3328 > git clone https://github.com/ARM-software/arm-trusted-firmware.git > git clone https://github.com/rockchip-linux/rkbin > git clone https://github.com/rockchip-linux/rkflashtool Compile ATF =============== > cd arm-trusted-firmware > make realclean > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3328 bl31 Compile U-Boot ================== > cd ../u-boot > make CROSS_COMPILE=aarch64-linux-gnu- evb-rk3328_defconfig all Compile rkflashtool ======================= > cd ../rkflashtool > make Package image for miniloader ================================ > cd .. > cp arm-trusted-firmware/build/rk3328/release/bl31.bin rkbin/rk33 > ./rkbin/tools/trust_merger rkbin/tools/RK3328TRUST.ini > ./rkbin/tools/loaderimage --pack --uboot u-boot/u-boot-dtb.bin uboot.img > mkdir image > mv trust.img ./image/ > mv uboot.img ./image/rk3328evb-uboot.bin Flash image =============== Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then: > ./rkflashtool/rkflashloader rk3328evb You should be able to get U-Boot log message in console/UART2 now.