u-boot/arch/arm/mvebu-common/serdes/high_speed_env_spec.c
Stefan Roese 2e19cc316f arm: mvebu: Add Serdes PHY config code
This code is ported from the Marvell bin_hdr code into mainline
SPL U-Boot. It needs to be executed very early so that the devices
connected to the serdes PHY are configured correctly.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
2015-02-06 17:24:59 +01:00

185 lines
6.7 KiB
C

/*
* Copyright (C) Marvell International Ltd. and its affiliates
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <i2c.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include "high_speed_env_spec.h"
MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[] = {
/* SERDES TYPE, Low REG OFFS, Low REG VALUE, Hi REG OFS, Hi REG VALUE */
{
/* PEX: Change of Slew Rate port0 */
SERDES_UNIT_PEX, 0x0,
(0x0F << 16) | 0x2a21, 0x0, (0x0F << 16) | 0x2a21
}, {
/* PEX: Change PLL BW port0 */
SERDES_UNIT_PEX, 0x0,
(0x4F << 16) | 0x6219, 0x0, (0x4F << 16) | 0x6219
}, {
/* SATA: Slew rate change port 0 */
SERDES_UNIT_SATA, 0x0083C, 0x8a31, 0x0083C, 0x8a31
}, {
/* SATA: Slew rate change port 0 */
SERDES_UNIT_SATA, 0x00834, 0xc928, 0x00834, 0xc928
}, {
/* SATA: Slew rate change port 0 */
SERDES_UNIT_SATA, 0x00838, 0x30f0, 0x00838, 0x30f0
}, {
/* SATA: Slew rate change port 0 */
SERDES_UNIT_SATA, 0x00840, 0x30f5, 0x00840, 0x30f5
}, {
/* SGMII: FFE setting Port0 */
SERDES_UNIT_SGMII0, 0x00E18, 0x989F, 0x00E18, 0x989F
}, {
/* SGMII: SELMUP and SELMUF Port0 */
SERDES_UNIT_SGMII0, 0x00E38, 0x10FA, 0x00E38, 0x10FA
}, {
/* SGMII: Amplitude new setting gen2 Port3 */
SERDES_UNIT_SGMII0, 0x00E34, 0xC968, 0x00E34, 0xC66C
}, {
/* QSGMII: Amplitude and slew rate change */
SERDES_UNIT_QSGMII, 0x72E34, 0xaa58, 0x72E34, 0xaa58
}, {
/* QSGMII: SELMUP and SELMUF */
SERDES_UNIT_QSGMII, 0x72e38, 0x10aF, 0x72e38, 0x10aF
}, {
/* QSGMII: 0x72e18 */
SERDES_UNIT_QSGMII, 0x72e18, 0x98AC, 0x72e18, 0x98AC
}, {
/* Null terminated */
SERDES_UNIT_UNCONNECTED, 0, 0
}
};
MV_BIN_SERDES_CFG db88f78xx0_serdes_cfg[] = {
/* Z1B */
{MV_PEX_ROOT_COMPLEX, 0x32221111, 0x11111111,
{PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x0030, serdes_change_m_phy}, /* Default */
{MV_PEX_ROOT_COMPLEX, 0x31211111, 0x11111111,
{PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x0030, serdes_change_m_phy}, /* PEX module */
/* Z1A */
{MV_PEX_ROOT_COMPLEX, 0x32220000, 0x00000000,
{PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED,
PEX_BUS_DISABLED}, 0x0030, serdes_change_m_phy}, /* Default - Z1A */
{MV_PEX_ROOT_COMPLEX, 0x31210000, 0x00000000,
{PEX_BUS_DISABLED, PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
0x0030, serdes_change_m_phy} /* PEX module - Z1A */
};
MV_BIN_SERDES_CFG db88f78xx0rev2_serdes_cfg[] = {
/* A0 */
{MV_PEX_ROOT_COMPLEX, 0x33221111, 0x11111111,
{PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x0030, serdes_change_m_phy}, /* Default: No Pex module, PEX0 x1, disabled */
{MV_PEX_ROOT_COMPLEX, 0x33211111, 0x11111111,
{PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x1, PEX1 x1 */
{MV_PEX_ROOT_COMPLEX, 0x33221111, 0x11111111,
{PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x0030, serdes_change_m_phy}, /* no Pex module, PEX0 x4, PEX1 disabled */
{MV_PEX_ROOT_COMPLEX, 0x33211111, 0x11111111,
{PEX_BUS_MODE_X4, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x4, PEX1 x1 */
{MV_PEX_ROOT_COMPLEX, 0x11111111, 0x11111111,
{PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x1, PEX1 x4 */
{MV_PEX_ROOT_COMPLEX, 0x11111111, 0x11111111,
{PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x4, PEX1 x4 */
};
MV_BIN_SERDES_CFG rd78460nas_serdes_cfg[] = {
{MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111,
{PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x0030, serdes_change_m_phy}, /* Default */
{MV_PEX_ROOT_COMPLEX, 0x33320201, 0x11111111,
{PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x00f4, serdes_change_m_phy}, /* Switch module */
};
MV_BIN_SERDES_CFG rd78460_serdes_cfg[] = {
{MV_PEX_ROOT_COMPLEX, 0x22321111, 0x00000000,
{PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
0x0010, serdes_change_m_phy}, /* CPU0 */
{MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000,
{PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
0x0010, serdes_change_m_phy} /* CPU1-3 */
};
MV_BIN_SERDES_CFG rd78460server_rev2_serdes_cfg[] = {
{MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000,
{PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
0x0010, serdes_change_m_phy}, /* CPU0 */
{MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000,
{PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
0x0010, serdes_change_m_phy} /* CPU1-3 */
};
MV_BIN_SERDES_CFG db78X60pcac_serdes_cfg[] = {
{MV_PEX_END_POINT, 0x22321111, 0x00000000,
{PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
0x0010, serdes_change_m_phy} /* Default */
};
MV_BIN_SERDES_CFG db78X60pcacrev2_serdes_cfg[] = {
{MV_PEX_END_POINT, 0x23321111, 0x00000000,
{PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
0x0010, serdes_change_m_phy} /* Default */
};
MV_BIN_SERDES_CFG fpga88f78xx0_serdes_cfg[] = {
{MV_PEX_ROOT_COMPLEX, 0x00000000, 0x00000000,
{PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
0x0000, serdes_change_m_phy} /* No PEX in FPGA */
};
MV_BIN_SERDES_CFG db78X60amc_serdes_cfg[] = {
{MV_PEX_ROOT_COMPLEX, 0x33111111, 0x00010001,
{PEX_BUS_MODE_X4, PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X1},
0x0030, serdes_change_m_phy} /* Default */
};
/*
* ARMADA-XP CUSTOMER BOARD
*/
MV_BIN_SERDES_CFG rd78460customer_serdes_cfg[] = {
{MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111,
{PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x00000030, serdes_change_m_phy}, /* Default */
{MV_PEX_ROOT_COMPLEX, 0x33320201, 0x11111111,
{PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x00000030, serdes_change_m_phy}, /* Switch module */
};
MV_BIN_SERDES_CFG rd78460AXP_GP_serdes_cfg[] = {
{MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111,
{PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
0x0030, serdes_change_m_phy} /* Default */
};
MV_BIN_SERDES_CFG *serdes_info_tbl[] = {
db88f78xx0_serdes_cfg,
rd78460_serdes_cfg,
db78X60pcac_serdes_cfg,
fpga88f78xx0_serdes_cfg,
db88f78xx0rev2_serdes_cfg,
rd78460nas_serdes_cfg,
db78X60amc_serdes_cfg,
db78X60pcacrev2_serdes_cfg,
rd78460server_rev2_serdes_cfg,
rd78460AXP_GP_serdes_cfg,
rd78460customer_serdes_cfg
};
u8 rd78460gp_twsi_dev[] = { 0x4C, 0x4D, 0x4E };
u8 db88f78xx0rev2_twsi_dev[] = { 0x4C, 0x4D, 0x4E, 0x4F };