u-boot/drivers/video/mx3fb.c
Helmut Raiger 62a22dca32 video: Moving mx3fb.c to CONFIG_VIDEO
mx3fb.c was based on CONFIG_LCD and is moved by this patch to
CONFIG_VIDEO, which has greater freedom in selecting videomodes
even at runtime.

This renders the accumulating list of display defines
(CONFIG_DISPLAY_VBEST..., CONFIG_DISPLAY_C057...) obsolete as
these may be setup through env variables:

uboot> setenv mydisplay 'video=ctfb240,y:320,depth:16,mode:0,pclk:185925,
	le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0'
uboot> setenv videomode ${mydisplay}

This commit also fixes the board config files for qong and
imx31_phycore boards as needed. The videomode settings of
previously supported displays are added to CONFIG_EXTRA_ENV_SETTINGS
now. CONFIG_SYS_MALLOC_LEN for imx31_phycore board is increased
to make the frame buffer allocation working with the changed
driver.

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
2011-10-13 10:41:36 +02:00

932 lines
24 KiB
C

/*
* Copyright (C) 2009
* Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
* Copyright (C) 2011
* HALE electronic GmbH, <helmut.raiger@hale.at>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <malloc.h>
#include <video_fb.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/errno.h>
#include <asm/io.h>
#include "videomodes.h"
/* this might need panel specific set-up as-well */
#define IF_CONF 0
/* -------------- controller specific stuff -------------- */
/* IPU DMA Controller channel definitions. */
enum ipu_channel {
IDMAC_IC_0 = 0, /* IC (encoding task) to memory */
IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */
IDMAC_ADC_0 = 1,
IDMAC_IC_2 = 2,
IDMAC_ADC_1 = 2,
IDMAC_IC_3 = 3,
IDMAC_IC_4 = 4,
IDMAC_IC_5 = 5,
IDMAC_IC_6 = 6,
IDMAC_IC_7 = 7, /* IC (sensor data) to memory */
IDMAC_IC_8 = 8,
IDMAC_IC_9 = 9,
IDMAC_IC_10 = 10,
IDMAC_IC_11 = 11,
IDMAC_IC_12 = 12,
IDMAC_IC_13 = 13,
IDMAC_SDC_0 = 14, /* Background synchronous display data */
IDMAC_SDC_1 = 15, /* Foreground data (overlay) */
IDMAC_SDC_2 = 16,
IDMAC_SDC_3 = 17,
IDMAC_ADC_2 = 18,
IDMAC_ADC_3 = 19,
IDMAC_ADC_4 = 20,
IDMAC_ADC_5 = 21,
IDMAC_ADC_6 = 22,
IDMAC_ADC_7 = 23,
IDMAC_PF_0 = 24,
IDMAC_PF_1 = 25,
IDMAC_PF_2 = 26,
IDMAC_PF_3 = 27,
IDMAC_PF_4 = 28,
IDMAC_PF_5 = 29,
IDMAC_PF_6 = 30,
IDMAC_PF_7 = 31,
};
/* More formats can be copied from the Linux driver if needed */
enum pixel_fmt {
/* 2 bytes */
IPU_PIX_FMT_RGB565,
IPU_PIX_FMT_RGB666,
IPU_PIX_FMT_BGR666,
/* 3 bytes */
IPU_PIX_FMT_RGB24,
};
struct pixel_fmt_cfg {
u32 b0;
u32 b1;
u32 b2;
u32 acc;
};
static struct pixel_fmt_cfg fmt_cfg[] = {
[IPU_PIX_FMT_RGB24] = {
0x1600AAAA, 0x00E05555, 0x00070000, 3,
},
[IPU_PIX_FMT_RGB666] = {
0x0005000F, 0x000B000F, 0x0011000F, 1,
},
[IPU_PIX_FMT_BGR666] = {
0x0011000F, 0x000B000F, 0x0005000F, 1,
},
[IPU_PIX_FMT_RGB565] = {
0x0004003F, 0x000A000F, 0x000F003F, 1,
}
};
enum ipu_panel {
IPU_PANEL_SHARP_TFT,
IPU_PANEL_TFT,
};
/* IPU Common registers */
/* IPU_CONF and its bits already defined in imx-regs.h */
#define IPU_CHA_BUF0_RDY (0x04 + IPU_BASE)
#define IPU_CHA_BUF1_RDY (0x08 + IPU_BASE)
#define IPU_CHA_DB_MODE_SEL (0x0C + IPU_BASE)
#define IPU_CHA_CUR_BUF (0x10 + IPU_BASE)
#define IPU_FS_PROC_FLOW (0x14 + IPU_BASE)
#define IPU_FS_DISP_FLOW (0x18 + IPU_BASE)
#define IPU_TASKS_STAT (0x1C + IPU_BASE)
#define IPU_IMA_ADDR (0x20 + IPU_BASE)
#define IPU_IMA_DATA (0x24 + IPU_BASE)
#define IPU_INT_CTRL_1 (0x28 + IPU_BASE)
#define IPU_INT_CTRL_2 (0x2C + IPU_BASE)
#define IPU_INT_CTRL_3 (0x30 + IPU_BASE)
#define IPU_INT_CTRL_4 (0x34 + IPU_BASE)
#define IPU_INT_CTRL_5 (0x38 + IPU_BASE)
#define IPU_INT_STAT_1 (0x3C + IPU_BASE)
#define IPU_INT_STAT_2 (0x40 + IPU_BASE)
#define IPU_INT_STAT_3 (0x44 + IPU_BASE)
#define IPU_INT_STAT_4 (0x48 + IPU_BASE)
#define IPU_INT_STAT_5 (0x4C + IPU_BASE)
#define IPU_BRK_CTRL_1 (0x50 + IPU_BASE)
#define IPU_BRK_CTRL_2 (0x54 + IPU_BASE)
#define IPU_BRK_STAT (0x58 + IPU_BASE)
#define IPU_DIAGB_CTRL (0x5C + IPU_BASE)
/* Image Converter Registers */
#define IC_CONF (0x88 + IPU_BASE)
#define IC_PRP_ENC_RSC (0x8C + IPU_BASE)
#define IC_PRP_VF_RSC (0x90 + IPU_BASE)
#define IC_PP_RSC (0x94 + IPU_BASE)
#define IC_CMBP_1 (0x98 + IPU_BASE)
#define IC_CMBP_2 (0x9C + IPU_BASE)
#define PF_CONF (0xA0 + IPU_BASE)
#define IDMAC_CONF (0xA4 + IPU_BASE)
#define IDMAC_CHA_EN (0xA8 + IPU_BASE)
#define IDMAC_CHA_PRI (0xAC + IPU_BASE)
#define IDMAC_CHA_BUSY (0xB0 + IPU_BASE)
/* Image Converter Register bits */
#define IC_CONF_PRPENC_EN 0x00000001
#define IC_CONF_PRPENC_CSC1 0x00000002
#define IC_CONF_PRPENC_ROT_EN 0x00000004
#define IC_CONF_PRPVF_EN 0x00000100
#define IC_CONF_PRPVF_CSC1 0x00000200
#define IC_CONF_PRPVF_CSC2 0x00000400
#define IC_CONF_PRPVF_CMB 0x00000800
#define IC_CONF_PRPVF_ROT_EN 0x00001000
#define IC_CONF_PP_EN 0x00010000
#define IC_CONF_PP_CSC1 0x00020000
#define IC_CONF_PP_CSC2 0x00040000
#define IC_CONF_PP_CMB 0x00080000
#define IC_CONF_PP_ROT_EN 0x00100000
#define IC_CONF_IC_GLB_LOC_A 0x10000000
#define IC_CONF_KEY_COLOR_EN 0x20000000
#define IC_CONF_RWS_EN 0x40000000
#define IC_CONF_CSI_MEM_WR_EN 0x80000000
/* SDC Registers */
#define SDC_COM_CONF (0xB4 + IPU_BASE)
#define SDC_GW_CTRL (0xB8 + IPU_BASE)
#define SDC_FG_POS (0xBC + IPU_BASE)
#define SDC_BG_POS (0xC0 + IPU_BASE)
#define SDC_CUR_POS (0xC4 + IPU_BASE)
#define SDC_PWM_CTRL (0xC8 + IPU_BASE)
#define SDC_CUR_MAP (0xCC + IPU_BASE)
#define SDC_HOR_CONF (0xD0 + IPU_BASE)
#define SDC_VER_CONF (0xD4 + IPU_BASE)
#define SDC_SHARP_CONF_1 (0xD8 + IPU_BASE)
#define SDC_SHARP_CONF_2 (0xDC + IPU_BASE)
/* Register bits */
#define SDC_COM_TFT_COLOR 0x00000001UL
#define SDC_COM_FG_EN 0x00000010UL
#define SDC_COM_GWSEL 0x00000020UL
#define SDC_COM_GLB_A 0x00000040UL
#define SDC_COM_KEY_COLOR_G 0x00000080UL
#define SDC_COM_BG_EN 0x00000200UL
#define SDC_COM_SHARP 0x00001000UL
#define SDC_V_SYNC_WIDTH_L 0x00000001UL
/* Display Interface registers */
#define DI_DISP_IF_CONF (0x0124 + IPU_BASE)
#define DI_DISP_SIG_POL (0x0128 + IPU_BASE)
#define DI_SER_DISP1_CONF (0x012C + IPU_BASE)
#define DI_SER_DISP2_CONF (0x0130 + IPU_BASE)
#define DI_HSP_CLK_PER (0x0134 + IPU_BASE)
#define DI_DISP0_TIME_CONF_1 (0x0138 + IPU_BASE)
#define DI_DISP0_TIME_CONF_2 (0x013C + IPU_BASE)
#define DI_DISP0_TIME_CONF_3 (0x0140 + IPU_BASE)
#define DI_DISP1_TIME_CONF_1 (0x0144 + IPU_BASE)
#define DI_DISP1_TIME_CONF_2 (0x0148 + IPU_BASE)
#define DI_DISP1_TIME_CONF_3 (0x014C + IPU_BASE)
#define DI_DISP2_TIME_CONF_1 (0x0150 + IPU_BASE)
#define DI_DISP2_TIME_CONF_2 (0x0154 + IPU_BASE)
#define DI_DISP2_TIME_CONF_3 (0x0158 + IPU_BASE)
#define DI_DISP3_TIME_CONF (0x015C + IPU_BASE)
#define DI_DISP0_DB0_MAP (0x0160 + IPU_BASE)
#define DI_DISP0_DB1_MAP (0x0164 + IPU_BASE)
#define DI_DISP0_DB2_MAP (0x0168 + IPU_BASE)
#define DI_DISP0_CB0_MAP (0x016C + IPU_BASE)
#define DI_DISP0_CB1_MAP (0x0170 + IPU_BASE)
#define DI_DISP0_CB2_MAP (0x0174 + IPU_BASE)
#define DI_DISP1_DB0_MAP (0x0178 + IPU_BASE)
#define DI_DISP1_DB1_MAP (0x017C + IPU_BASE)
#define DI_DISP1_DB2_MAP (0x0180 + IPU_BASE)
#define DI_DISP1_CB0_MAP (0x0184 + IPU_BASE)
#define DI_DISP1_CB1_MAP (0x0188 + IPU_BASE)
#define DI_DISP1_CB2_MAP (0x018C + IPU_BASE)
#define DI_DISP2_DB0_MAP (0x0190 + IPU_BASE)
#define DI_DISP2_DB1_MAP (0x0194 + IPU_BASE)
#define DI_DISP2_DB2_MAP (0x0198 + IPU_BASE)
#define DI_DISP2_CB0_MAP (0x019C + IPU_BASE)
#define DI_DISP2_CB1_MAP (0x01A0 + IPU_BASE)
#define DI_DISP2_CB2_MAP (0x01A4 + IPU_BASE)
#define DI_DISP3_B0_MAP (0x01A8 + IPU_BASE)
#define DI_DISP3_B1_MAP (0x01AC + IPU_BASE)
#define DI_DISP3_B2_MAP (0x01B0 + IPU_BASE)
#define DI_DISP_ACC_CC (0x01B4 + IPU_BASE)
#define DI_DISP_LLA_CONF (0x01B8 + IPU_BASE)
#define DI_DISP_LLA_DATA (0x01BC + IPU_BASE)
/* DI_DISP_SIG_POL bits */
#define DI_D3_VSYNC_POL (1 << 28)
#define DI_D3_HSYNC_POL (1 << 27)
#define DI_D3_DRDY_SHARP_POL (1 << 26)
#define DI_D3_CLK_POL (1 << 25)
#define DI_D3_DATA_POL (1 << 24)
/* DI_DISP_IF_CONF bits */
#define DI_D3_CLK_IDLE (1 << 26)
#define DI_D3_CLK_SEL (1 << 25)
#define DI_D3_DATAMSK (1 << 24)
#define IOMUX_PADNUM_MASK 0x1ff
#define IOMUX_GPIONUM_SHIFT 9
#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT)
#define IOMUX_PIN(gpionum, padnum) ((padnum) & IOMUX_PADNUM_MASK)
#define IOMUX_MODE_L(pin, mode) IOMUX_MODE(((pin) + 0xc) ^ 3, mode)
struct chan_param_mem_planar {
/* Word 0 */
u32 xv:10;
u32 yv:10;
u32 xb:12;
u32 yb:12;
u32 res1:2;
u32 nsb:1;
u32 lnpb:6;
u32 ubo_l:11;
u32 ubo_h:15;
u32 vbo_l:17;
u32 vbo_h:9;
u32 res2:3;
u32 fw:12;
u32 fh_l:8;
u32 fh_h:4;
u32 res3:28;
/* Word 1 */
u32 eba0;
u32 eba1;
u32 bpp:3;
u32 sl:14;
u32 pfs:3;
u32 bam:3;
u32 res4:2;
u32 npb:6;
u32 res5:1;
u32 sat:2;
u32 res6:30;
} __attribute__ ((packed));
struct chan_param_mem_interleaved {
/* Word 0 */
u32 xv:10;
u32 yv:10;
u32 xb:12;
u32 yb:12;
u32 sce:1;
u32 res1:1;
u32 nsb:1;
u32 lnpb:6;
u32 sx:10;
u32 sy_l:1;
u32 sy_h:9;
u32 ns:10;
u32 sm:10;
u32 sdx_l:3;
u32 sdx_h:2;
u32 sdy:5;
u32 sdrx:1;
u32 sdry:1;
u32 sdr1:1;
u32 res2:2;
u32 fw:12;
u32 fh_l:8;
u32 fh_h:4;
u32 res3:28;
/* Word 1 */
u32 eba0;
u32 eba1;
u32 bpp:3;
u32 sl:14;
u32 pfs:3;
u32 bam:3;
u32 res4:2;
u32 npb:6;
u32 res5:1;
u32 sat:2;
u32 scc:1;
u32 ofs0:5;
u32 ofs1:5;
u32 ofs2:5;
u32 ofs3:5;
u32 wid0:3;
u32 wid1:3;
u32 wid2:3;
u32 wid3:3;
u32 dec_sel:1;
u32 res6:28;
} __attribute__ ((packed));
union chan_param_mem {
struct chan_param_mem_planar pp;
struct chan_param_mem_interleaved ip;
};
DECLARE_GLOBAL_DATA_PTR;
/* graphics setup */
static GraphicDevice panel;
static struct ctfb_res_modes *mode;
static struct ctfb_res_modes var_mode;
/*
* sdc_init_panel() - initialize a synchronous LCD panel.
* @width: width of panel in pixels.
* @height: height of panel in pixels.
* @di_setup: pixel format of the frame buffer
* @di_panel: either SHARP or normal TFT
* @return: 0 on success or negative error code on failure.
*/
static int sdc_init_panel(u16 width, u16 height,
enum pixel_fmt di_setup, enum ipu_panel di_panel)
{
u32 reg, div;
uint32_t old_conf;
int clock;
debug("%s(width=%d, height=%d)\n", __func__, width, height);
/* Init clocking, the IPU receives its clock from the hsp divder */
clock = mxc_get_clock(MXC_IPU_CLK);
if (clock < 0)
return -EACCES;
/* Init panel size and blanking periods */
reg = width + mode->left_margin + mode->right_margin - 1;
if (reg > 1023) {
printf("mx3fb: Display width too large, coerced to 1023!");
reg = 1023;
}
reg = ((mode->hsync_len - 1) << 26) | (reg << 16);
writel(reg, SDC_HOR_CONF);
reg = height + mode->upper_margin + mode->lower_margin - 1;
if (reg > 1023) {
printf("mx3fb: Display height too large, coerced to 1023!");
reg = 1023;
}
reg = ((mode->vsync_len - 1) << 26) | SDC_V_SYNC_WIDTH_L | (reg << 16);
writel(reg, SDC_VER_CONF);
switch (di_panel) {
case IPU_PANEL_SHARP_TFT:
writel(0x00FD0102L, SDC_SHARP_CONF_1);
writel(0x00F500F4L, SDC_SHARP_CONF_2);
writel(SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
/* TODO: probably IF_CONF must be adapted (see below)! */
break;
case IPU_PANEL_TFT:
writel(SDC_COM_TFT_COLOR, SDC_COM_CONF);
break;
default:
return -EINVAL;
}
/*
* Calculate divider: The fractional part is 4 bits so simply
* multiple by 2^4 to get it.
*
* Opposed to the kernel driver mode->pixclock is the time of one
* pixel in pico seconds, so:
* pixel_clk = 1e12 / mode->pixclock
* div = ipu_clk * 16 / pixel_clk
* leads to:
* div = ipu_clk * 16 / (1e12 / mode->pixclock)
* or:
* div = ipu_clk * 16 * mode->pixclock / 1e12
*
* To avoid integer overflows this is split into 2 shifts and
* one divide with sufficient accuracy:
* 16*1024*128*476837 = 0.9999996682e12
*/
div = ((clock/1024) * (mode->pixclock/128)) / 476837;
debug("hsp_clk is %d, div=%d\n", clock, div);
/* coerce to not less than 4.0, not more than 255.9375 */
if (div < 0x40)
div = 0x40;
else if (div > 0xFFF)
div = 0xFFF;
/* DISP3_IF_CLK_DOWN_WR is half the divider value and 2 less
* fraction bits. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR
* based on timing debug DISP3_IF_CLK_UP_WR is 0
*/
writel((((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
/* DI settings for display 3: clock idle (bit 26) during vsync */
old_conf = readl(DI_DISP_IF_CONF) & 0x78FFFFFF;
writel(old_conf | IF_CONF, DI_DISP_IF_CONF);
/* only set display 3 polarity bits */
old_conf = readl(DI_DISP_SIG_POL) & 0xE0FFFFFF;
writel(old_conf | mode->sync, DI_DISP_SIG_POL);
writel(fmt_cfg[di_setup].b0, DI_DISP3_B0_MAP);
writel(fmt_cfg[di_setup].b1, DI_DISP3_B1_MAP);
writel(fmt_cfg[di_setup].b2, DI_DISP3_B2_MAP);
writel(readl(DI_DISP_ACC_CC) |
((fmt_cfg[di_setup].acc - 1) << 12), DI_DISP_ACC_CC);
debug("DI_DISP_IF_CONF = 0x%08X\n", readl(DI_DISP_IF_CONF));
debug("DI_DISP_SIG_POL = 0x%08X\n", readl(DI_DISP_SIG_POL));
debug("DI_DISP3_TIME_CONF = 0x%08X\n", readl(DI_DISP3_TIME_CONF));
debug("SDC_HOR_CONF = 0x%08X\n", readl(SDC_HOR_CONF));
debug("SDC_VER_CONF = 0x%08X\n", readl(SDC_VER_CONF));
return 0;
}
static void ipu_ch_param_set_size(union chan_param_mem *params,
uint pixelfmt, uint16_t width,
uint16_t height, uint16_t stride)
{
debug("%s(pixelfmt=%d, width=%d, height=%d, stride=%d)\n",
__func__, pixelfmt, width, height, stride);
params->pp.fw = width - 1;
params->pp.fh_l = height - 1;
params->pp.fh_h = (height - 1) >> 8;
params->pp.sl = stride - 1;
/* See above, for further formats see the Linux driver */
switch (pixelfmt) {
case GDF_16BIT_565RGB:
params->ip.bpp = 2;
params->ip.pfs = 4;
params->ip.npb = 7;
params->ip.sat = 2; /* SAT = 32-bit access */
params->ip.ofs0 = 0; /* Red bit offset */
params->ip.ofs1 = 5; /* Green bit offset */
params->ip.ofs2 = 11; /* Blue bit offset */
params->ip.ofs3 = 16; /* Alpha bit offset */
params->ip.wid0 = 4; /* Red bit width - 1 */
params->ip.wid1 = 5; /* Green bit width - 1 */
params->ip.wid2 = 4; /* Blue bit width - 1 */
break;
case GDF_32BIT_X888RGB:
params->ip.bpp = 1; /* 24 BPP & RGB PFS */
params->ip.pfs = 4;
params->ip.npb = 7;
params->ip.sat = 2; /* SAT = 32-bit access */
params->ip.ofs0 = 16; /* Red bit offset */
params->ip.ofs1 = 8; /* Green bit offset */
params->ip.ofs2 = 0; /* Blue bit offset */
params->ip.ofs3 = 24; /* Alpha bit offset */
params->ip.wid0 = 7; /* Red bit width - 1 */
params->ip.wid1 = 7; /* Green bit width - 1 */
params->ip.wid2 = 7; /* Blue bit width - 1 */
break;
default:
printf("mx3fb: Pixel format not supported!\n");
break;
}
params->pp.nsb = 1;
}
static void ipu_ch_param_set_buffer(union chan_param_mem *params,
void *buf0, void *buf1)
{
params->pp.eba0 = (u32)buf0;
params->pp.eba1 = (u32)buf1;
}
static void ipu_write_param_mem(uint32_t addr, uint32_t *data,
uint32_t num_words)
{
for (; num_words > 0; num_words--) {
writel(addr, IPU_IMA_ADDR);
writel(*data++, IPU_IMA_DATA);
addr++;
if ((addr & 0x7) == 5) {
addr &= ~0x7; /* set to word 0 */
addr += 8; /* increment to next row */
}
}
}
static uint32_t dma_param_addr(enum ipu_channel channel)
{
/* Channel Parameter Memory */
return 0x10000 | (channel << 4);
}
static void ipu_init_channel_buffer(enum ipu_channel channel, void *fbmem)
{
union chan_param_mem params = {};
uint32_t reg;
uint32_t stride_bytes;
stride_bytes = (panel.plnSizeX * panel.gdfBytesPP + 3) & ~3;
debug("%s(channel=%d, fbmem=%p)\n", __func__, channel, fbmem);
/* Build parameter memory data for DMA channel */
ipu_ch_param_set_size(&params, panel.gdfIndex,
panel.plnSizeX, panel.plnSizeY, stride_bytes);
ipu_ch_param_set_buffer(&params, fbmem, NULL);
params.pp.bam = 0;
/* Some channels (rotation) have restriction on burst length */
switch (channel) {
case IDMAC_SDC_0:
/* In original code only IPU_PIX_FMT_RGB565 was setting burst */
params.pp.npb = 16 - 1;
break;
default:
break;
}
ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)&params, 10);
/* Disable double-buffering */
reg = readl(IPU_CHA_DB_MODE_SEL);
reg &= ~(1UL << channel);
writel(reg, IPU_CHA_DB_MODE_SEL);
}
static void ipu_channel_set_priority(enum ipu_channel channel,
int prio)
{
u32 reg = readl(IDMAC_CHA_PRI);
if (prio)
reg |= 1UL << channel;
else
reg &= ~(1UL << channel);
writel(reg, IDMAC_CHA_PRI);
}
/*
* ipu_enable_channel() - enable an IPU channel.
* @channel: channel ID.
* @return: 0 on success or negative error code on failure.
*/
static int ipu_enable_channel(enum ipu_channel channel)
{
uint32_t reg;
/* Reset to buffer 0 */
writel(1UL << channel, IPU_CHA_CUR_BUF);
switch (channel) {
case IDMAC_SDC_0:
ipu_channel_set_priority(channel, 1);
break;
default:
break;
}
reg = readl(IDMAC_CHA_EN);
writel(reg | (1UL << channel), IDMAC_CHA_EN);
return 0;
}
static int ipu_update_channel_buffer(enum ipu_channel channel, void *buf)
{
uint32_t reg;
reg = readl(IPU_CHA_BUF0_RDY);
if (reg & (1UL << channel))
return -EACCES;
/* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */
writel(dma_param_addr(channel) + 0x0008UL, IPU_IMA_ADDR);
writel((u32)buf, IPU_IMA_DATA);
return 0;
}
static int idmac_tx_submit(enum ipu_channel channel, void *buf)
{
int ret;
ipu_init_channel_buffer(channel, buf);
/* ipu_idmac.c::ipu_submit_channel_buffers() */
ret = ipu_update_channel_buffer(channel, buf);
if (ret < 0)
return ret;
/* ipu_idmac.c::ipu_select_buffer() */
/* Mark buffer 0 as ready. */
writel(1UL << channel, IPU_CHA_BUF0_RDY);
ret = ipu_enable_channel(channel);
return ret;
}
static void sdc_enable_channel(void *fbmem)
{
int ret;
u32 reg;
ret = idmac_tx_submit(IDMAC_SDC_0, fbmem);
/* mx3fb.c::sdc_fb_init() */
if (ret >= 0) {
reg = readl(SDC_COM_CONF);
writel(reg | SDC_COM_BG_EN, SDC_COM_CONF);
}
/*
* Attention! Without this msleep the channel keeps generating
* interrupts. Next sdc_set_brightness() is going to be called
* from mx3fb_blank().
*/
udelay(2000);
}
/*
* mx3fb_set_par() - set framebuffer parameters and change the operating mode.
* @return: 0 on success or negative error code on failure.
* TODO: currently only 666 and TFT as DI setup supported
*/
static int mx3fb_set_par(void)
{
int ret;
ret = sdc_init_panel(panel.plnSizeX, panel.plnSizeY,
IPU_PIX_FMT_RGB666, IPU_PANEL_TFT);
if (ret < 0)
return ret;
writel((mode->left_margin << 16) | mode->upper_margin, SDC_BG_POS);
return 0;
}
static void ll_disp3_enable(void *base)
{
u32 reg;
debug("%s(base=0x%x)\n", __func__, (u32) base);
/* pcm037.c::mxc_board_init() */
/* Display Interface #3 */
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD0, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD1, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD2, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD3, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD4, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD5, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD6, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD7, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD8, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD9, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD10, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD11, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD12, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD13, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD14, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD15, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD16, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD17, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_VSYNC3, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_HSYNC, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_FPSHIFT, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_DRDY0, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_D3_REV, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_CONTRAST, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_D3_SPL, MUX_CTL_FUNC));
mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_D3_CLS, MUX_CTL_FUNC));
/* ipu_idmac.c::ipu_probe() */
/* Start the clock */
__REG(CCM_CGR1) = __REG(CCM_CGR1) | (3 << 22);
/* ipu_idmac.c::ipu_idmac_init() */
/* Service request counter to maximum - shouldn't be needed */
writel(0x00000070, IDMAC_CONF);
/* ipu_idmac.c::ipu_init_channel() */
/* Enable IPU sub modules */
reg = readl(IPU_CONF) | IPU_CONF_SDC_EN | IPU_CONF_DI_EN;
writel(reg, IPU_CONF);
/* mx3fb.c::init_fb_chan() */
/* set Display Interface clock period */
writel(0x00100010L, DI_HSP_CLK_PER);
/* Might need to trigger HSP clock change - see 44.3.3.8.5 */
/* mx3fb.c::sdc_set_brightness() */
/* This might be board-specific */
writel(0x03000000UL | 255 << 16, SDC_PWM_CTRL);
/* mx3fb.c::sdc_set_global_alpha() */
/* Use global - not per-pixel - Alpha-blending */
reg = readl(SDC_GW_CTRL) & 0x00FFFFFFL;
writel(reg | ((uint32_t) 0xff << 24), SDC_GW_CTRL);
reg = readl(SDC_COM_CONF);
writel(reg | SDC_COM_GLB_A, SDC_COM_CONF);
/* mx3fb.c::sdc_set_color_key() */
/* Disable colour-keying for background */
reg = readl(SDC_COM_CONF) &
~(SDC_COM_GWSEL | SDC_COM_KEY_COLOR_G);
writel(reg, SDC_COM_CONF);
mx3fb_set_par();
sdc_enable_channel(base);
/*
* Linux driver calls sdc_set_brightness() here again,
* once is enough for us
*/
debug("%s() done\n", __func__);
}
/* ------------------------ public part ------------------- */
ulong calc_fbsize(void)
{
return panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP;
}
/*
* The current implementation is only tested for GDF_16BIT_565RGB!
* It was switched from the original CONFIG_LCD setup to CONFIG_VIDEO,
* because the lcd code seemed loaded with color table stuff, that
* does not relate to most modern TFTs. cfb_console.c looks more
* straight forward.
* This is the environment setting for the original setup
* "unknown=video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925,le:9,ri:17,
* up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0"
* "videomode=unknown"
*
* Settings for VBEST VGG322403 display:
* "videomode=video=ctfb:x:320,y:240,depth:16,mode:0,pclk:156000,
* "le:20,ri:68,up:7,lo:29,hs:30,vs:3,sync:100663296,vmode:0"
*
* Settings for COM57H5M10XRC display:
* "videomode=video=ctfb:x:640,y:480,depth:16,mode:0,pclk:40000,
* "le:120,ri:40,up:35,lo:10,hs:30,vs:3,sync:100663296,vmode:0"
*/
void *video_hw_init(void)
{
char *penv;
u32 memsize;
unsigned long t1, hsynch, vsynch;
int bits_per_pixel, i, tmp, vesa_idx = 0, videomode;
tmp = 0;
puts("Video: ");
videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE;
/* get video mode via environment */
penv = getenv("videomode");
if (penv) {
/* decide if it is a string */
if (penv[0] <= '9') {
videomode = (int) simple_strtoul(penv, NULL, 16);
tmp = 1;
}
} else {
tmp = 1;
}
if (tmp) {
/* parameter are vesa modes */
/* search params */
for (i = 0; i < VESA_MODES_COUNT; i++) {
if (vesa_modes[i].vesanr == videomode)
break;
}
if (i == VESA_MODES_COUNT) {
printf("No VESA Mode found, switching to mode 0x%x ",
CONFIG_SYS_DEFAULT_VIDEO_MODE);
i = 0;
}
mode = (struct ctfb_res_modes *)
&res_mode_init[vesa_modes[i].resindex];
bits_per_pixel = vesa_modes[i].bits_per_pixel;
vesa_idx = vesa_modes[i].resindex;
} else {
mode = (struct ctfb_res_modes *) &var_mode;
bits_per_pixel = video_get_params(mode, penv);
}
/* calculate hsynch and vsynch freq (info only) */
t1 = (mode->left_margin + mode->xres +
mode->right_margin + mode->hsync_len) / 8;
t1 *= 8;
t1 *= mode->pixclock;
t1 /= 1000;
hsynch = 1000000000L / t1;
t1 *= (mode->upper_margin + mode->yres +
mode->lower_margin + mode->vsync_len);
t1 /= 1000;
vsynch = 1000000000L / t1;
/* fill in Graphic device struct */
sprintf(panel.modeIdent, "%dx%dx%d %ldkHz %ldHz",
mode->xres, mode->yres,
bits_per_pixel, (hsynch / 1000), (vsynch / 1000));
printf("%s\n", panel.modeIdent);
panel.winSizeX = mode->xres;
panel.winSizeY = mode->yres;
panel.plnSizeX = mode->xres;
panel.plnSizeY = mode->yres;
switch (bits_per_pixel) {
case 24:
panel.gdfBytesPP = 4;
panel.gdfIndex = GDF_32BIT_X888RGB;
break;
case 16:
panel.gdfBytesPP = 2;
panel.gdfIndex = GDF_16BIT_565RGB;
break;
default:
panel.gdfBytesPP = 1;
panel.gdfIndex = GDF__8BIT_INDEX;
break;
}
/* set up Hardware */
memsize = calc_fbsize();
debug("%s() allocating %d bytes\n", __func__, memsize);
/* fill in missing Graphic device struct */
panel.frameAdrs = (u32) malloc(memsize);
if (panel.frameAdrs == 0) {
printf("%s() malloc(%d) failed\n", __func__, memsize);
return 0;
}
panel.memSize = memsize;
ll_disp3_enable((void *) panel.frameAdrs);
memset((void *) panel.frameAdrs, 0, memsize);
debug("%s() done, framebuffer at 0x%x, size=%d cleared\n",
__func__, panel.frameAdrs, memsize);
return (void *) &panel;
}
void video_set_lut(unsigned int index, /* color number */
unsigned char r, /* red */
unsigned char g, /* green */
unsigned char b /* blue */
)
{
return;
}