u-boot/include/config_cmd_all.h
Francois Retief 3f33f6a28b sparc: Kconfig: Move the CMD_AMBAPP command to Kconfig
Add an initr function in the board_r.c file for the AMBA Plug&Play
command. Add a Kconfig entry for the ambapp command and remove all
CONFIG_CMD_AMBAPP defines from the board configuration headers.

Add a Kconfig entry to display the AMBA Plug&Play information
on startup. This option is off by default. Remove relevent define
from board configuration headers.

Signed-off-by: Francois Retief <fgretief@spaceteq.co.za>
2015-11-13 10:23:32 +02:00

76 lines
3.3 KiB
C

/*
* Copyright 2007 Freescale Semiconductor, Inc.
*
* This file is licensed under the terms of the GNU General Public
* License Version 2. This file is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef _CONFIG_CMD_ALL_H
#define _CONFIG_CMD_ALL_H
/*
* Alphabetical list of all possible commands.
*/
#define CONFIG_CMD_ASKENV /* ask for env variable */
#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
#define CONFIG_CMD_BMP /* BMP support */
#define CONFIG_CMD_BOOTZ /* boot zImage */
#define CONFIG_CMD_BSP /* Board Specific functions */
#define CONFIG_CMD_CACHE /* icache, dcache */
#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */
#define CONFIG_CMD_CLK /* Clock support */
#define CONFIG_CMD_DATE /* support for RTC, date/time...*/
#define CONFIG_CMD_DHCP /* DHCP Support */
#define CONFIG_CMD_DIAG /* Diagnostics */
#define CONFIG_CMD_DISPLAY /* Display support */
#define CONFIG_CMD_DOC /* Disk-On-Chip Support */
#define CONFIG_CMD_DTT /* Digital Therm and Thermostat */
#define CONFIG_CMD_EEPROM /* EEPROM read/write support */
#define CONFIG_CMD_EXT2 /* EXT2 Support */
#define CONFIG_CMD_FAT /* FAT support */
#define CONFIG_CMD_FDC /* Floppy Disk Support */
#define CONFIG_CMD_FUSE /* Device fuse support */
#define CONFIG_CMD_GETTIME /* Get time since boot */
#define CONFIG_CMD_HASH /* calculate hash / digest */
#define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_IDE /* IDE harddisk support */
#define CONFIG_CMD_IMMAP /* IMMR dump support */
#define CONFIG_CMD_IO /* Access to X86 IO space */
#define CONFIG_CMD_IRQ /* irqinfo */
#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
#define CONFIG_CMD_KGDB /* kgdb */
#define CONFIG_CMD_LICENSE /* console license display */
#define CONFIG_CMD_MEMINFO /* meminfo */
#define CONFIG_CMD_MEMTEST /* mtest */
#define CONFIG_CMD_MFSL /* FSL support for Microblaze */
#define CONFIG_CMD_MII /* MII support */
#define CONFIG_CMD_MMC /* MMC support */
#define CONFIG_CMD_MTDPARTS /* mtd parts support */
#define CONFIG_CMD_NAND /* NAND support */
#define CONFIG_CMD_ONENAND /* OneNAND support */
#define CONFIG_CMD_PCI /* pciinfo */
#define CONFIG_CMD_PCMCIA /* PCMCIA support */
#define CONFIG_CMD_PING /* ping support */
#define CONFIG_CMD_PORTIO /* Port I/O */
#define CONFIG_CMD_REGINFO /* Register dump */
#define CONFIG_CMD_REISER /* Reiserfs support */
#define CONFIG_CMD_RARP /* rarpboot support */
#define CONFIG_CMD_READ /* Read data from partition */
#define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */
#define CONFIG_CMD_SAVES /* save S record dump */
#define CONFIG_CMD_SCSI /* SCSI Support */
#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
#define CONFIG_CMD_SNTP /* SNTP support */
#define CONFIG_CMD_SPI /* SPI utility */
#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */
#define CONFIG_CMD_UBI /* UBI Support */
#define CONFIG_CMD_UBIFS /* UBIFS Support */
#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
#define CONFIG_CMD_UNZIP /* unzip from memory to memory */
#define CONFIG_CMD_USB /* USB Support */
#define CONFIG_CMD_ZFS /* ZFS Support */
#endif /* _CONFIG_CMD_ALL_H */