mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
2dae800f1e
Add lcd output support, see the new Kconfig entries and doc/README.video for how to enable / configure this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
331 lines
7.8 KiB
Text
331 lines
7.8 KiB
Text
if ARCH_SUNXI
|
|
|
|
choice
|
|
prompt "Sunxi SoC Variant"
|
|
|
|
config MACH_SUN4I
|
|
bool "sun4i (Allwinner A10)"
|
|
select CPU_V7
|
|
select SUPPORT_SPL
|
|
|
|
config MACH_SUN5I
|
|
bool "sun5i (Allwinner A13)"
|
|
select CPU_V7
|
|
select SUPPORT_SPL
|
|
|
|
config MACH_SUN6I
|
|
bool "sun6i (Allwinner A31)"
|
|
select CPU_V7
|
|
select SUPPORT_SPL
|
|
|
|
config MACH_SUN7I
|
|
bool "sun7i (Allwinner A20)"
|
|
select CPU_V7
|
|
select CPU_V7_HAS_NONSEC
|
|
select CPU_V7_HAS_VIRT
|
|
select SUPPORT_SPL
|
|
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
|
|
|
|
config MACH_SUN8I
|
|
bool "sun8i (Allwinner A23)"
|
|
select CPU_V7
|
|
select SUPPORT_SPL
|
|
|
|
endchoice
|
|
|
|
if MACH_SUN6I || MACH_SUN8I
|
|
|
|
config DRAM_CLK
|
|
int "sun6i dram clock speed"
|
|
default 312
|
|
---help---
|
|
Set the dram clock speed, valid range 240 - 480, must be a multiple
|
|
of 24.
|
|
|
|
config DRAM_ZQ
|
|
int "sun6i dram zq value"
|
|
default 123
|
|
---help---
|
|
Set the dram zq value.
|
|
|
|
endif
|
|
|
|
config SYS_CONFIG_NAME
|
|
default "sun4i" if MACH_SUN4I
|
|
default "sun5i" if MACH_SUN5I
|
|
default "sun6i" if MACH_SUN6I
|
|
default "sun7i" if MACH_SUN7I
|
|
default "sun8i" if MACH_SUN8I
|
|
|
|
choice
|
|
prompt "Board"
|
|
|
|
config TARGET_A10_OLINUXINO_L
|
|
bool "A10_OLINUXINO_L"
|
|
depends on MACH_SUN4I
|
|
|
|
config TARGET_A10S_OLINUXINO_M
|
|
bool "A10S_OLINUXINO_M"
|
|
depends on MACH_SUN5I
|
|
|
|
config TARGET_A13_OLINUXINOM
|
|
bool "A13_OLINUXINOM"
|
|
depends on MACH_SUN5I
|
|
|
|
config TARGET_A13_OLINUXINO
|
|
bool "A13_OLINUXINO"
|
|
depends on MACH_SUN5I
|
|
|
|
config TARGET_A20_OLINUXINO_L2
|
|
bool "A20_OLINUXINO_L2"
|
|
depends on MACH_SUN7I
|
|
|
|
config TARGET_A20_OLINUXINO_L
|
|
bool "A20_OLINUXINO_L"
|
|
depends on MACH_SUN7I
|
|
|
|
config TARGET_A20_OLINUXINO_M
|
|
bool "A20_OLINUXINO_M"
|
|
depends on MACH_SUN7I
|
|
|
|
config TARGET_AUXTEK_T004
|
|
bool "AUXTEK_T004"
|
|
depends on MACH_SUN5I
|
|
|
|
config TARGET_BANANAPI
|
|
bool "BANANAPI"
|
|
depends on MACH_SUN7I
|
|
|
|
config TARGET_BANANAPRO
|
|
bool "BANANAPRO"
|
|
depends on MACH_SUN7I
|
|
|
|
config TARGET_COLOMBUS
|
|
bool "COLOMBUS"
|
|
depends on MACH_SUN6I
|
|
|
|
config TARGET_CUBIEBOARD2
|
|
bool "CUBIEBOARD2"
|
|
depends on MACH_SUN7I
|
|
|
|
config TARGET_CUBIEBOARD
|
|
bool "CUBIEBOARD"
|
|
depends on MACH_SUN4I
|
|
|
|
config TARGET_CUBIETRUCK
|
|
bool "CUBIETRUCK"
|
|
depends on MACH_SUN7I
|
|
|
|
config TARGET_HUMMINGBIRD_A31
|
|
bool "HUMMINGBIRD_A31"
|
|
depends on MACH_SUN6I
|
|
|
|
config TARGET_IPPO_Q8H_V5
|
|
bool "IPPO_Q8H_V5"
|
|
depends on MACH_SUN8I
|
|
|
|
config TARGET_PCDUINO3
|
|
bool "PCDUINO3"
|
|
depends on MACH_SUN7I
|
|
|
|
config TARGET_MELE_A1000G
|
|
bool "MELE_A1000G"
|
|
depends on MACH_SUN4I
|
|
|
|
config TARGET_MELE_A1000
|
|
bool "MELE_A1000"
|
|
depends on MACH_SUN4I
|
|
|
|
config TARGET_MELE_M3
|
|
bool "MELE_M3"
|
|
depends on MACH_SUN7I
|
|
|
|
config TARGET_MELE_M9
|
|
bool "MELE_M9"
|
|
depends on MACH_SUN6I
|
|
|
|
config TARGET_MINI_X_1GB
|
|
bool "MINI_X_1GB"
|
|
depends on MACH_SUN4I
|
|
|
|
config TARGET_MINI_X
|
|
bool "MINI_X"
|
|
depends on MACH_SUN4I
|
|
|
|
config TARGET_MSI_PRIMO73
|
|
bool "MSI Primo73 (7\" tablet)"
|
|
depends on MACH_SUN7I
|
|
---help---
|
|
The MSI Primo73 is an A20 based tablet, with 1G RAM, 16G NAND,
|
|
1024x600 TN LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
|
|
rear camera, 3000 mAh battery, gt911 touchscreen, mma8452 accelerometer
|
|
and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
|
|
(both volume buttons are also connected to the UBOOT_SEL pin). The
|
|
external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
|
|
OTG and 3.5mm headphone jack. More details are available at
|
|
http://linux-sunxi.org/MSI_Primo73
|
|
|
|
config TARGET_MSI_PRIMO81
|
|
bool "MSI Primo81 (7.85\" tablet)"
|
|
depends on MACH_SUN6I
|
|
---help---
|
|
The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND,
|
|
1024x768 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
|
|
rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer
|
|
and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
|
|
(both volume buttons are also connected to the UBOOT_SEL pin). The
|
|
external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
|
|
OTG and 3.5mm headphone jack. More details are available at
|
|
http://linux-sunxi.org/MSI_Primo81
|
|
|
|
config TARGET_BA10_TV_BOX
|
|
bool "BA10_TV_BOX"
|
|
depends on MACH_SUN4I
|
|
|
|
config TARGET_I12_TVBOX
|
|
bool "I12_TVBOX"
|
|
depends on MACH_SUN7I
|
|
|
|
config TARGET_QT840A
|
|
bool "QT840A"
|
|
depends on MACH_SUN7I
|
|
|
|
config TARGET_R7DONGLE
|
|
bool "R7DONGLE"
|
|
depends on MACH_SUN5I
|
|
|
|
endchoice
|
|
|
|
config SYS_BOARD
|
|
default "sunxi"
|
|
|
|
config SYS_SOC
|
|
default "sunxi"
|
|
|
|
config SPL_FEL
|
|
bool "SPL/FEL mode support"
|
|
depends on SPL
|
|
default n
|
|
|
|
config UART0_PORT_F
|
|
bool "UART0 on MicroSD breakout board"
|
|
depends on SPL_FEL
|
|
default n
|
|
---help---
|
|
Repurpose the SD card slot for getting access to the UART0 serial
|
|
console. Primarily useful only for low level u-boot debugging on
|
|
tablets, where normal UART0 is difficult to access and requires
|
|
device disassembly and/or soldering. As the SD card can't be used
|
|
at the same time, the system can be only booted in the FEL mode.
|
|
Only enable this if you really know what you are doing.
|
|
|
|
config FDTFILE
|
|
string "Default fdtfile env setting for this board"
|
|
|
|
config OLD_SUNXI_KERNEL_COMPAT
|
|
boolean "Enable workarounds for booting old kernels"
|
|
default n
|
|
---help---
|
|
Set this to enable various workarounds for old kernels, this results in
|
|
sub-optimal settings for newer kernels, only enable if needed.
|
|
|
|
config MMC0_CD_PIN
|
|
string "Card detect pin for mmc0"
|
|
default ""
|
|
---help---
|
|
Set the card detect pin for mmc0, leave empty to not use cd. This
|
|
takes a string in the format understood by sunxi_name_to_gpio, e.g.
|
|
PH1 for pin 1 of port H.
|
|
|
|
config MMC1_CD_PIN
|
|
string "Card detect pin for mmc1"
|
|
default ""
|
|
---help---
|
|
See MMC0_CD_PIN help text.
|
|
|
|
config MMC2_CD_PIN
|
|
string "Card detect pin for mmc2"
|
|
default ""
|
|
---help---
|
|
See MMC0_CD_PIN help text.
|
|
|
|
config MMC3_CD_PIN
|
|
string "Card detect pin for mmc3"
|
|
default ""
|
|
---help---
|
|
See MMC0_CD_PIN help text.
|
|
|
|
config MMC_SUNXI_SLOT_EXTRA
|
|
int "mmc extra slot number"
|
|
default -1
|
|
---help---
|
|
sunxi builds always enable mmc0, some boards also have a second sdcard
|
|
slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
|
|
support for this.
|
|
|
|
config USB1_VBUS_PIN
|
|
string "Vbus enable pin for usb1 (ehci0)"
|
|
default "PH6" if MACH_SUN4I || MACH_SUN7I
|
|
default "PH27" if MACH_SUN6I
|
|
---help---
|
|
Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes
|
|
a string in the format understood by sunxi_name_to_gpio, e.g.
|
|
PH1 for pin 1 of port H.
|
|
|
|
config USB2_VBUS_PIN
|
|
string "Vbus enable pin for usb2 (ehci1)"
|
|
default "PH3" if MACH_SUN4I || MACH_SUN7I
|
|
default "PH24" if MACH_SUN6I
|
|
---help---
|
|
See USB1_VBUS_PIN help text.
|
|
|
|
config VIDEO
|
|
boolean "Enable graphical uboot console on HDMI, LCD or VGA"
|
|
default y
|
|
---help---
|
|
Say Y here to add support for using a cfb console on the HDMI, LCD
|
|
or VGA output found on most sunxi devices. See doc/README.video for
|
|
info on how to select the video output and mode.
|
|
|
|
config VIDEO_LCD_MODE
|
|
string "LCD panel timing details"
|
|
depends on VIDEO
|
|
default ""
|
|
---help---
|
|
LCD panel timing details string, leave empty if there is no LCD panel.
|
|
This is in drivers/video/videomodes.c: video_get_params() format, e.g.
|
|
x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0
|
|
|
|
config VIDEO_LCD_POWER
|
|
string "LCD panel power enable pin"
|
|
depends on VIDEO
|
|
default ""
|
|
---help---
|
|
Set the power enable pin for the LCD panel. This takes a string in the
|
|
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_BL_EN
|
|
string "LCD panel backlight enable pin"
|
|
depends on VIDEO
|
|
default ""
|
|
---help---
|
|
Set the backlight enable pin for the LCD panel. This takes a string in the
|
|
the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of
|
|
port H.
|
|
|
|
config VIDEO_LCD_BL_PWM
|
|
string "LCD panel backlight pwm pin"
|
|
depends on VIDEO
|
|
default ""
|
|
---help---
|
|
Set the backlight pwm pin for the LCD panel. This takes a string in the
|
|
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
|
|
|
|
config USB_KEYBOARD
|
|
boolean "Enable USB keyboard support"
|
|
default y
|
|
---help---
|
|
Say Y here to add support for using a USB keyboard (typically used
|
|
in combination with a graphical console).
|
|
|
|
endif
|