u-boot/arch/arm/mach-uniphier/spl_board_init.c
Masahiro Yamada 26b09c022a ARM: uniphier: move SBC and Support Card init code to U-Boot proper
Initialize SBC and Support Card in U-Boot proper instead of SPL.

We may run different firmware (ex. ARM Trusted Firmware) before
U-Boot, and basic SoC initialization may be done there.  In that
case, SPL may not be used.

The motivation for preparing SBC and Support Card in SPL was to use
LED for early debugging, but this is not mandatory to boot SoCs.
With this commit, LED will be unavailable in SPL, but we can use a
debug serial instead.  So, this change will not be a big deal.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-01-18 01:22:30 +09:00

185 lines
4.6 KiB
C

/*
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <debug_uart.h>
#include <spl.h>
#include "init.h"
#include "micro-support-card.h"
#include "soc-info.h"
struct uniphier_spl_initdata {
enum uniphier_soc_id soc_id;
void (*bcu_init)(const struct uniphier_board_data *bd);
void (*early_clk_init)(void);
int (*dpll_init)(const struct uniphier_board_data *bd);
int (*memconf_init)(const struct uniphier_board_data *bd);
void (*dram_clk_init)(void);
int (*umc_init)(const struct uniphier_board_data *bd);
};
static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
#if defined(CONFIG_ARCH_UNIPHIER_SLD3)
{
.soc_id = SOC_UNIPHIER_SLD3,
.bcu_init = uniphier_sld3_bcu_init,
.early_clk_init = uniphier_sld3_early_clk_init,
.dpll_init = uniphier_sld3_dpll_init,
.memconf_init = uniphier_memconf_3ch_no_disbit_init,
.dram_clk_init = uniphier_sld3_dram_clk_init,
.umc_init = uniphier_sld3_umc_init,
},
#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD4)
{
.soc_id = SOC_UNIPHIER_LD4,
.bcu_init = uniphier_ld4_bcu_init,
.early_clk_init = uniphier_sld3_early_clk_init,
.dpll_init = uniphier_ld4_dpll_init,
.memconf_init = uniphier_memconf_2ch_init,
.dram_clk_init = uniphier_sld3_dram_clk_init,
.umc_init = uniphier_ld4_umc_init,
},
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
{
.soc_id = SOC_UNIPHIER_PRO4,
.early_clk_init = uniphier_sld3_early_clk_init,
.dpll_init = uniphier_pro4_dpll_init,
.memconf_init = uniphier_memconf_2ch_init,
.dram_clk_init = uniphier_sld3_dram_clk_init,
.umc_init = uniphier_pro4_umc_init,
},
#endif
#if defined(CONFIG_ARCH_UNIPHIER_SLD8)
{
.soc_id = SOC_UNIPHIER_SLD8,
.bcu_init = uniphier_ld4_bcu_init,
.early_clk_init = uniphier_sld3_early_clk_init,
.dpll_init = uniphier_sld8_dpll_init,
.memconf_init = uniphier_memconf_2ch_init,
.dram_clk_init = uniphier_sld3_dram_clk_init,
.umc_init = uniphier_sld8_umc_init,
},
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
{
.soc_id = SOC_UNIPHIER_PRO5,
.early_clk_init = uniphier_sld3_early_clk_init,
.dpll_init = uniphier_pro5_dpll_init,
.memconf_init = uniphier_memconf_2ch_init,
.dram_clk_init = uniphier_pro5_dram_clk_init,
.umc_init = uniphier_pro5_umc_init,
},
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PXS2)
{
.soc_id = SOC_UNIPHIER_PXS2,
.early_clk_init = uniphier_sld3_early_clk_init,
.dpll_init = uniphier_pxs2_dpll_init,
.memconf_init = uniphier_memconf_3ch_init,
.dram_clk_init = uniphier_pxs2_dram_clk_init,
.umc_init = uniphier_pxs2_umc_init,
},
#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD6B)
{
.soc_id = SOC_UNIPHIER_LD6B,
.early_clk_init = uniphier_sld3_early_clk_init,
.dpll_init = uniphier_pxs2_dpll_init,
.memconf_init = uniphier_memconf_3ch_init,
.dram_clk_init = uniphier_pxs2_dram_clk_init,
.umc_init = uniphier_pxs2_umc_init,
},
#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD11)
{
.soc_id = SOC_UNIPHIER_LD11,
.early_clk_init = uniphier_ld11_early_clk_init,
.dpll_init = uniphier_ld11_dpll_init,
.memconf_init = uniphier_memconf_2ch_init,
.dram_clk_init = uniphier_ld11_dram_clk_init,
.umc_init = uniphier_ld11_umc_init,
},
#endif
#if defined(CONFIG_ARCH_UNIPHIER_LD20)
{
.soc_id = SOC_UNIPHIER_LD20,
.early_clk_init = uniphier_ld11_early_clk_init,
.dpll_init = uniphier_ld20_dpll_init,
.memconf_init = uniphier_memconf_3ch_init,
.dram_clk_init = uniphier_ld20_dram_clk_init,
.umc_init = uniphier_ld20_umc_init,
},
#endif
};
static const struct uniphier_spl_initdata *uniphier_get_spl_initdata(
enum uniphier_soc_id soc_id)
{
int i;
for (i = 0; i < ARRAY_SIZE(uniphier_spl_initdata); i++) {
if (uniphier_spl_initdata[i].soc_id == soc_id)
return &uniphier_spl_initdata[i];
}
return NULL;
}
void spl_board_init(void)
{
const struct uniphier_board_data *bd;
const struct uniphier_spl_initdata *initdata;
enum uniphier_soc_id soc_id;
int ret;
#ifdef CONFIG_DEBUG_UART
debug_uart_init();
#endif
bd = uniphier_get_board_param();
if (!bd)
hang();
soc_id = uniphier_get_soc_type();
initdata = uniphier_get_spl_initdata(soc_id);
if (!initdata)
hang();
if (initdata->bcu_init)
initdata->bcu_init(bd);
initdata->early_clk_init();
#ifdef CONFIG_SPL_SERIAL_SUPPORT
preloader_console_init();
#endif
ret = initdata->dpll_init(bd);
if (ret) {
pr_err("failed to init DPLL\n");
hang();
}
ret = initdata->memconf_init(bd);
if (ret) {
pr_err("failed to init MEMCONF\n");
hang();
}
initdata->dram_clk_init();
ret = initdata->umc_init(bd);
if (ret) {
pr_err("failed to init DRAM\n");
hang();
}
}