u-boot/board/tplink/wdr4300/wdr4300.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

81 lines
1.8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Marek Vasut <marex@denx.de>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/addrspace.h>
#include <asm/types.h>
#include <mach/ath79.h>
#include <mach/ar71xx_regs.h>
#include <mach/ddr.h>
#include <debug_uart.h>
#ifdef CONFIG_USB
static void wdr4300_usb_start(void)
{
void __iomem *gpio_regs = map_physmem(AR71XX_GPIO_BASE,
AR71XX_GPIO_SIZE, MAP_NOCACHE);
if (!gpio_regs)
return;
/* Power up the USB HUB. */
clrbits_be32(gpio_regs + AR71XX_GPIO_REG_OE, BIT(21) | BIT(22));
writel(BIT(21) | BIT(22), gpio_regs + AR71XX_GPIO_REG_SET);
mdelay(1);
ath79_usb_reset();
}
#else
static inline void wdr4300_usb_start(void) {}
#endif
void wdr4300_pinmux_config(void)
{
void __iomem *regs;
regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE,
MAP_NOCACHE);
/* Assure JTAG is not disconnected. */
writel(0x40, regs + AR934X_GPIO_REG_FUNC);
/* Configure default GPIO input/output regs. */
writel(0x3031b, regs + AR71XX_GPIO_REG_OE);
writel(0x0f804, regs + AR71XX_GPIO_REG_OUT);
/* Configure pin multiplexing. */
writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC0);
writel(0x0b0a0980, regs + AR934X_GPIO_REG_OUT_FUNC1);
writel(0x00180000, regs + AR934X_GPIO_REG_OUT_FUNC2);
writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC3);
writel(0x0000004d, regs + AR934X_GPIO_REG_OUT_FUNC4);
writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC5);
}
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
void board_debug_uart_init(void)
{
wdr4300_pinmux_config();
}
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
#ifndef CONFIG_DEBUG_UART_BOARD_INIT
wdr4300_pinmux_config();
#endif
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
ar934x_pll_init(560, 480, 240);
ar934x_ddr_init(560, 480, 240);
#endif
wdr4300_usb_start();
ath79_eth_reset();
return 0;
}
#endif