u-boot/arch/arm/include/asm/arch-mxs/sys_proto.h
Graeme Russ 2d6286ab79 arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode
When booting in JTAG mode, there is no way to use soft break-points, and
no way of knowing when SPL has finished executing (so the user can issue
a 'halt' command to load u-boot.bin for example)

Add a debug output and simple loop to stop execution at the completion of
the SPL initialisation as a pseudo break-point when booting in JTAG mode

Signed-off-by: Graeme Russ <gruss@tss-engineering.com>
2015-02-10 12:48:50 +01:00

101 lines
2.8 KiB
C

/*
* Freescale i.MX23/i.MX28 specific functions
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __SYS_PROTO_H__
#define __SYS_PROTO_H__
#include <asm/imx-common/regs-common.h>
int mxs_reset_block(struct mxs_register_32 *reg);
int mxs_wait_mask_set(struct mxs_register_32 *reg,
uint32_t mask,
unsigned int timeout);
int mxs_wait_mask_clr(struct mxs_register_32 *reg,
uint32_t mask,
unsigned int timeout);
int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int));
#ifdef CONFIG_SPL_BUILD
#if defined(CONFIG_MX23)
#include <asm/arch/iomux-mx23.h>
#elif defined(CONFIG_MX28)
#include <asm/arch/iomux-mx28.h>
#endif
void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr,
const iomux_cfg_t *iomux_setup,
const unsigned int iomux_size);
#endif
struct mxs_pair {
uint8_t boot_pads;
uint8_t boot_mask;
const char *mode;
};
static const struct mxs_pair mxs_boot_modes[] = {
#if defined(CONFIG_MX23)
{ 0x00, 0x0f, "USB" },
{ 0x01, 0x1f, "I2C, master" },
{ 0x02, 0x1f, "SSP SPI #1, master, NOR" },
{ 0x03, 0x1f, "SSP SPI #2, master, NOR" },
{ 0x04, 0x1f, "NAND" },
{ 0x06, 0x1f, "JTAG" },
{ 0x08, 0x1f, "SSP SPI #3, master, EEPROM" },
{ 0x09, 0x1f, "SSP SD/MMC #0" },
{ 0x0a, 0x1f, "SSP SD/MMC #1" },
{ 0x00, 0x00, "Reserved/Unknown/Wrong" },
#elif defined(CONFIG_MX28)
{ 0x00, 0x0f, "USB #0" },
{ 0x01, 0x1f, "I2C #0, master, 3V3" },
{ 0x11, 0x1f, "I2C #0, master, 1V8" },
{ 0x02, 0x1f, "SSP SPI #2, master, 3V3 NOR" },
{ 0x12, 0x1f, "SSP SPI #2, master, 1V8 NOR" },
{ 0x03, 0x1f, "SSP SPI #3, master, 3V3 NOR" },
{ 0x13, 0x1f, "SSP SPI #3, master, 1V8 NOR" },
{ 0x04, 0x1f, "NAND, 3V3" },
{ 0x14, 0x1f, "NAND, 1V8" },
{ 0x06, 0x1f, "JTAG" },
{ 0x08, 0x1f, "SSP SPI #3, master, 3V3 EEPROM" },
{ 0x18, 0x1f, "SSP SPI #3, master, 1V8 EEPROM" },
{ 0x09, 0x1f, "SSP SD/MMC #0, 3V3" },
{ 0x19, 0x1f, "SSP SD/MMC #0, 1V8" },
{ 0x0a, 0x1f, "SSP SD/MMC #1, 3V3" },
{ 0x1a, 0x1f, "SSP SD/MMC #1, 1V8" },
{ 0x00, 0x00, "Reserved/Unknown/Wrong" },
#endif
};
#define MXS_BM_USB 0x00
#define MXS_BM_I2C_MASTER_3V3 0x01
#define MXS_BM_I2C_MASTER_1V8 0x11
#define MXS_BM_SPI2_MASTER_3V3_NOR 0x02
#define MXS_BM_SPI2_MASTER_1V8_NOR 0x12
#define MXS_BM_SPI3_MASTER_3V3_NOR 0x03
#define MXS_BM_SPI3_MASTER_1V8_NOR 0x13
#define MXS_BM_NAND_3V3 0x04
#define MXS_BM_NAND_1V8 0x14
#define MXS_BM_JTAG 0x06
#define MXS_BM_SPI3_MASTER_3V3_EEPROM 0x08
#define MXS_BM_SPI3_MASTER_1V8_EEPROM 0x18
#define MXS_BM_SDMMC0_3V3 0x09
#define MXS_BM_SDMMC0_1V8 0x19
#define MXS_BM_SDMMC1_3V3 0x0a
#define MXS_BM_SDMMC1_1V8 0x1a
struct mxs_spl_data {
uint8_t boot_mode_idx;
uint32_t mem_dram_size;
};
int mxs_dram_init(void);
#endif /* __SYS_PROTO_H__ */