Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-21 02:33:07 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/freescale/p1010rdb/p1010rdb.c
Tom Rini 6d5d0c955e i2c: fsl_i2c: Migrate to Kconfig 
- As there are no boards that use different values for speed / slave on
  different buses, use a single option.
- Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options.
- Introduce _HAS_ options for additional buses as only the first one is
  common to all users.
- Convert all remaining symbols to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:10:07 -04:00

723 lines
17 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2010-2011 Freescale Semiconductor, Inc.
* Copyright 2020 NXP
*/
#include <common.h>
#include <command.h>
#include <image.h>
#include <init.h>
#include <net.h>
#include <asm/global_data.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/io.h>
#include <env.h>
#include <miiphy.h>
#include <linux/libfdt.h>
#include <fdt_support.h>
#include <fsl_mdio.h>
#include <tsec.h>
#include <mmc.h>
#include <netdev.h>
#include <pci.h>
#include <asm/fsl_serdes.h>
#include <fsl_ifc.h>
#include <asm/fsl_pci.h>
#include <hwconfig.h>
#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
#define GPIO4_PCIE_RESET_SET 0x08000000
#define MUX_CPLD_CAN_UART 0x00
#define MUX_CPLD_TDM 0x01
#define MUX_CPLD_SPICS0_FLASH 0x00
#define MUX_CPLD_SPICS0_SLIC 0x02
#define PMUXCR1_IFC_MASK 0x00ffff00
#define PMUXCR1_SDHC_MASK 0x00fff000
#define PMUXCR1_SDHC_ENABLE 0x00555000
enum {
MUX_TYPE_IFC,
MUX_TYPE_SDHC,
MUX_TYPE_SPIFLASH,
MUX_TYPE_TDM,
MUX_TYPE_CAN,
MUX_TYPE_CS0_NOR,
MUX_TYPE_CS0_NAND,
};
enum {
I2C_READ_BANK,
I2C_READ_PCB_VER,
};
static uint sd_ifc_mux;
struct cpld_data {
u8 cpld_ver; /* cpld revision */
#if defined(CONFIG_TARGET_P1010RDB_PA)
u8 pcba_ver; /* pcb revision number */
u8 twindie_ddr3;
u8 res1[6];
u8 bank_sel; /* NOR Flash bank */
u8 res2[5];
u8 usb2_sel;
u8 res3[1];
u8 porsw_sel;
u8 tdm_can_sel;
u8 spi_cs0_sel; /* SPI CS0 SLIC/SPI Flash */
u8 por0; /* POR Options */
u8 por1; /* POR Options */
u8 por2; /* POR Options */
u8 por3; /* POR Options */
#elif defined(CONFIG_TARGET_P1010RDB_PB)
u8 rom_loc;
#endif
};
int board_early_init_f(void)
{
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
/* Clock configuration to access CPLD using IFC(GPCM) */
setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
/*
* Reset PCIe slots via GPIO4
*/
setbits_be32(&pgpio->gpdir, GPIO4_PCIE_RESET_SET);
setbits_be32(&pgpio->gpdat, GPIO4_PCIE_RESET_SET);
return 0;
}
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
int flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
if (flash_esel == -1) {
/* very unlikely unless something is messed up */
puts("Error: Could not find TLB for FLASH BASE\n");
flash_esel = 2; /* give our best effort to continue */
} else {
/* invalidate existing TLB entry for flash */
disable_tlb(flash_esel);
}
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_16M, 1);
set_tlb(1, flashbase + 0x1000000,
CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel+1, BOOKE_PAGESZ_16M, 1);
return 0;
}
int config_board_mux(int ctrl_type)
{
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u8 tmp;
#if CONFIG_IS_ENABLED(DM_I2C)
struct udevice *dev;
int ret;
#if defined(CONFIG_TARGET_P1010RDB_PA)
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
ret = i2c_get_chip_for_busnum(I2C_PCA9557_BUS_NUM,
I2C_PCA9557_ADDR1, 1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n",
__func__, I2C_PCA9557_BUS_NUM);
return ret;
}
switch (ctrl_type) {
case MUX_TYPE_IFC:
tmp = 0xf0;
dm_i2c_write(dev, 3, &tmp, 1);
tmp = 0x01;
dm_i2c_write(dev, 1, &tmp, 1);
sd_ifc_mux = MUX_TYPE_IFC;
clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
break;
case MUX_TYPE_SDHC:
tmp = 0xf0;
dm_i2c_write(dev, 3, &tmp, 1);
tmp = 0x05;
dm_i2c_write(dev, 1, &tmp, 1);
sd_ifc_mux = MUX_TYPE_SDHC;
clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
PMUXCR1_SDHC_ENABLE);
break;
case MUX_TYPE_SPIFLASH:
out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
break;
case MUX_TYPE_TDM:
out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
break;
case MUX_TYPE_CAN:
out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
break;
default:
break;
}
#elif defined(CONFIG_TARGET_P1010RDB_PB)
ret = i2c_get_chip_for_busnum(I2C_PCA9557_BUS_NUM,
I2C_PCA9557_ADDR2, 1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n",
__func__, I2C_PCA9557_BUS_NUM);
return ret;
}
switch (ctrl_type) {
case MUX_TYPE_IFC:
dm_i2c_read(dev, 0, &tmp, 1);
clrbits_8(&tmp, 0x04);
dm_i2c_write(dev, 1, &tmp, 1);
dm_i2c_read(dev, 3, &tmp, 1);
clrbits_8(&tmp, 0x04);
dm_i2c_write(dev, 3, &tmp, 1);
sd_ifc_mux = MUX_TYPE_IFC;
clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
break;
case MUX_TYPE_SDHC:
dm_i2c_read(dev, 0, &tmp, 1);
setbits_8(&tmp, 0x04);
dm_i2c_write(dev, 1, &tmp, 1);
dm_i2c_read(dev, 3, &tmp, 1);
clrbits_8(&tmp, 0x04);
dm_i2c_write(dev, 3, &tmp, 1);
sd_ifc_mux = MUX_TYPE_SDHC;
clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
PMUXCR1_SDHC_ENABLE);
break;
case MUX_TYPE_SPIFLASH:
dm_i2c_read(dev, 0, &tmp, 1);
clrbits_8(&tmp, 0x80);
dm_i2c_write(dev, 1, &tmp, 1);
dm_i2c_read(dev, 3, &tmp, 1);
clrbits_8(&tmp, 0x80);
dm_i2c_write(dev, 3, &tmp, 1);
break;
case MUX_TYPE_TDM:
dm_i2c_read(dev, 0, &tmp, 1);
setbits_8(&tmp, 0x82);
dm_i2c_write(dev, 1, &tmp, 1);
dm_i2c_read(dev, 3, &tmp, 1);
clrbits_8(&tmp, 0x82);
dm_i2c_write(dev, 3, &tmp, 1);
break;
case MUX_TYPE_CAN:
dm_i2c_read(dev, 0, &tmp, 1);
clrbits_8(&tmp, 0x02);
dm_i2c_write(dev, 1, &tmp, 1);
dm_i2c_read(dev, 3, &tmp, 1);
clrbits_8(&tmp, 0x02);
dm_i2c_write(dev, 3, &tmp, 1);
break;
case MUX_TYPE_CS0_NOR:
dm_i2c_read(dev, 0, &tmp, 1);
clrbits_8(&tmp, 0x08);
dm_i2c_write(dev, 1, &tmp, 1);
dm_i2c_read(dev, 3, &tmp, 1);
clrbits_8(&tmp, 0x08);
dm_i2c_write(dev, 3, &tmp, 1);
break;
case MUX_TYPE_CS0_NAND:
dm_i2c_read(dev, 0, &tmp, 1);
setbits_8(&tmp, 0x08);
dm_i2c_write(dev, 1, &tmp, 1);
dm_i2c_read(dev, 3, &tmp, 1);
clrbits_8(&tmp, 0x08);
dm_i2c_write(dev, 3, &tmp, 1);
break;
default:
break;
}
#endif
#else
#if defined(CONFIG_TARGET_P1010RDB_PA)
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
switch (ctrl_type) {
case MUX_TYPE_IFC:
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
tmp = 0xf0;
i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
tmp = 0x01;
i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
sd_ifc_mux = MUX_TYPE_IFC;
clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
break;
case MUX_TYPE_SDHC:
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
tmp = 0xf0;
i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
tmp = 0x05;
i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
sd_ifc_mux = MUX_TYPE_SDHC;
clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
PMUXCR1_SDHC_ENABLE);
break;
case MUX_TYPE_SPIFLASH:
out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
break;
case MUX_TYPE_TDM:
out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
break;
case MUX_TYPE_CAN:
out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
break;
default:
break;
}
#elif defined(CONFIG_TARGET_P1010RDB_PB)
uint orig_bus = i2c_get_bus_num();
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
switch (ctrl_type) {
case MUX_TYPE_IFC:
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
clrbits_8(&tmp, 0x04);
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
clrbits_8(&tmp, 0x04);
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
sd_ifc_mux = MUX_TYPE_IFC;
clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
break;
case MUX_TYPE_SDHC:
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
setbits_8(&tmp, 0x04);
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
clrbits_8(&tmp, 0x04);
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
sd_ifc_mux = MUX_TYPE_SDHC;
clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
PMUXCR1_SDHC_ENABLE);
break;
case MUX_TYPE_SPIFLASH:
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
clrbits_8(&tmp, 0x80);
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
clrbits_8(&tmp, 0x80);
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
break;
case MUX_TYPE_TDM:
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
setbits_8(&tmp, 0x82);
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
clrbits_8(&tmp, 0x82);
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
break;
case MUX_TYPE_CAN:
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
clrbits_8(&tmp, 0x02);
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
clrbits_8(&tmp, 0x02);
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
break;
case MUX_TYPE_CS0_NOR:
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
clrbits_8(&tmp, 0x08);
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
clrbits_8(&tmp, 0x08);
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
break;
case MUX_TYPE_CS0_NAND:
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
setbits_8(&tmp, 0x08);
i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
clrbits_8(&tmp, 0x08);
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
break;
default:
break;
}
i2c_set_bus_num(orig_bus);
#endif
#endif
return 0;
}
#ifdef CONFIG_TARGET_P1010RDB_PB
int i2c_pca9557_read(int type)
{
u8 val;
int bus_num = I2C_PCA9557_BUS_NUM;
#if CONFIG_IS_ENABLED(DM_I2C)
struct udevice *dev;
int ret;
ret = i2c_get_chip_for_busnum(bus_num, I2C_PCA9557_ADDR2, 1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n",
__func__, bus_num);
return ret;
}
dm_i2c_read(dev, 0, &val, 1);
#else
i2c_set_bus_num(bus_num);
i2c_read(I2C_PCA9557_ADDR2, 0, 1, &val, 1);
#endif
switch (type) {
case I2C_READ_BANK:
val = (val & 0x10) >> 4;
break;
case I2C_READ_PCB_VER:
val = ((val & 0x60) >> 5) + 1;
break;
default:
break;
}
return val;
}
#endif
int checkboard(void)
{
struct cpu_type *cpu;
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
u8 val;
cpu = gd->arch.cpu;
#if defined(CONFIG_TARGET_P1010RDB_PA)
printf("Board: %sRDB-PA, ", cpu->name);
#elif defined(CONFIG_TARGET_P1010RDB_PB)
printf("Board: %sRDB-PB, ", cpu->name);
#if CONFIG_IS_ENABLED(DM_I2C)
struct udevice *dev;
int ret;
ret = i2c_get_chip_for_busnum(I2C_PCA9557_BUS_NUM, I2C_PCA9557_ADDR2,
1, &dev);
if (ret) {
printf("%s: Cannot find udev for a bus %d\n", __func__,
I2C_PCA9557_BUS_NUM);
return ret;
}
val = 0x0; /* no polarity inversion */
dm_i2c_write(dev, 2, &val, 1);
#else
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
val = 0x0; /* no polarity inversion */
i2c_write(I2C_PCA9557_ADDR2, 2, 1, &val, 1);
#endif
#endif
#ifdef CONFIG_SDCARD
/* switch to IFC to read info from CPLD */
config_board_mux(MUX_TYPE_IFC);
#endif
#if defined(CONFIG_TARGET_P1010RDB_PA)
val = (in_8(&cpld_data->pcba_ver) & 0xf);
printf("PCB: v%x.0\n", val);
#elif defined(CONFIG_TARGET_P1010RDB_PB)
val = in_8(&cpld_data->cpld_ver);
printf("CPLD: v%x.%x, ", val >> 4, val & 0xf);
printf("PCB: v%x.0, ", i2c_pca9557_read(I2C_READ_PCB_VER));
val = in_8(&cpld_data->rom_loc) & 0xf;
puts("Boot from: ");
switch (val) {
case 0xf:
config_board_mux(MUX_TYPE_CS0_NOR);
printf("NOR vBank%d\n", i2c_pca9557_read(I2C_READ_BANK));
break;
case 0xe:
puts("SDHC\n");
val = 0x60; /* set pca9557 pin input/output */
#if CONFIG_IS_ENABLED(DM_I2C)
dm_i2c_write(dev, 3, &val, 1);
#else
i2c_write(I2C_PCA9557_ADDR2, 3, 1, &val, 1);
#endif
break;
case 0x5:
config_board_mux(MUX_TYPE_IFC);
config_board_mux(MUX_TYPE_CS0_NAND);
puts("NAND\n");
break;
case 0x6:
config_board_mux(MUX_TYPE_IFC);
puts("SPI\n");
break;
default:
puts("unknown\n");
break;
}
#endif
return 0;
}
#ifndef CONFIG_DM_ETH
int board_eth_init(struct bd_info *bis)
{
#ifdef CONFIG_TSEC_ENET
struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
struct cpu_type *cpu;
int num = 0;
cpu = gd->arch.cpu;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
num++;
#endif
#ifdef CONFIG_TSEC2
SET_STD_TSEC_INFO(tsec_info[num], 2);
num++;
#endif
#ifdef CONFIG_TSEC3
/* P1014 and it's derivatives do not support eTSEC3 */
if (cpu->soc_ver != SVR_P1014) {
SET_STD_TSEC_INFO(tsec_info[num], 3);
num++;
}
#endif
if (!num) {
printf("No TSECs initialized\n");
return 0;
}
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
mdio_info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &mdio_info);
tsec_eth_init(bis, tsec_info, num);
#endif
return pci_eth_init(bis);
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
void fdt_del_flexcan(void *blob)
{
int nodeoff = 0;
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
"fsl,p1010-flexcan")) >= 0) {
fdt_del_node(blob, nodeoff);
}
}
void fdt_del_spi_flash(void *blob)
{
int nodeoff = 0;
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
"spansion,s25sl12801")) >= 0) {
fdt_del_node(blob, nodeoff);
}
}
void fdt_del_spi_slic(void *blob)
{
int nodeoff = 0;
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
"zarlink,le88266")) >= 0) {
fdt_del_node(blob, nodeoff);
}
}
void fdt_del_tdm(void *blob)
{
int nodeoff = 0;
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
"fsl,starlite-tdm")) >= 0) {
fdt_del_node(blob, nodeoff);
}
}
void fdt_del_sdhc(void *blob)
{
int nodeoff = 0;
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
"fsl,esdhc")) >= 0) {
fdt_del_node(blob, nodeoff);
}
}
void fdt_del_ifc(void *blob)
{
int nodeoff = 0;
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
"fsl,ifc")) >= 0) {
fdt_del_node(blob, nodeoff);
}
}
void fdt_disable_uart1(void *blob)
{
int nodeoff;
nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,ns16550",
CONFIG_SYS_NS16550_COM2);
if (nodeoff > 0) {
fdt_status_disabled(blob, nodeoff);
} else {
printf("WARNING unable to set status for fsl,ns16550 "
"uart1: %s\n", fdt_strerror(nodeoff));
}
}
int ft_board_setup(void *blob, struct bd_info *bd)
{
phys_addr_t base;
phys_size_t size;
struct cpu_type *cpu;
cpu = gd->arch.cpu;
ft_cpu_setup(blob, bd);
base = env_get_bootm_low();
size = env_get_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
#if defined(CONFIG_HAS_FSL_DR_USB)
fsl_fdt_fixup_dr_usb(blob, bd);
#endif
/* P1014 and it's derivatives don't support CAN and eTSEC3 */
if (cpu->soc_ver == SVR_P1014) {
fdt_del_flexcan(blob);
fdt_del_node_and_alias(blob, "ethernet2");
}
/* Delete IFC node as IFC pins are multiplexing with SDHC */
if (sd_ifc_mux != MUX_TYPE_IFC)
fdt_del_ifc(blob);
else
fdt_del_sdhc(blob);
if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
fdt_del_tdm(blob);
fdt_del_spi_slic(blob);
} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
fdt_del_flexcan(blob);
fdt_del_spi_flash(blob);
fdt_disable_uart1(blob);
} else {
/*
* If we don't set fsl_p1010mux:tdm_can to "can" or "tdm"
* explicitly, defaultly spi_cs_sel to spi-flash instead of
* to tdm/slic.
*/
fdt_del_tdm(blob);
fdt_del_flexcan(blob);
fdt_disable_uart1(blob);
}
return 0;
}
#endif
#ifdef CONFIG_SDCARD
int board_mmc_init(struct bd_info *bis)
{
config_board_mux(MUX_TYPE_SDHC);
return -1;
}
#else
void board_reset(void)
{
/* mux to IFC to enable CPLD for reset */
if (sd_ifc_mux != MUX_TYPE_IFC)
config_board_mux(MUX_TYPE_IFC);
}
#endif
int misc_init_r(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN1_TDM |
MPC85xx_PMUXCR_CAN1_UART |
MPC85xx_PMUXCR_CAN2_TDM |
MPC85xx_PMUXCR_CAN2_UART);
config_board_mux(MUX_TYPE_CAN);
} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART |
MPC85xx_PMUXCR_CAN1_UART);
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_TDM |
MPC85xx_PMUXCR_CAN1_TDM);
clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO);
setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM);
config_board_mux(MUX_TYPE_TDM);
} else {
/* defaultly spi_cs_sel to flash */
config_board_mux(MUX_TYPE_SPIFLASH);
}
if (hwconfig("esdhc"))
config_board_mux(MUX_TYPE_SDHC);
else if (hwconfig("ifc"))
config_board_mux(MUX_TYPE_IFC);
#ifdef CONFIG_TARGET_P1010RDB_PB
setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
#endif
return 0;
}
#ifndef CONFIG_SPL_BUILD
static int pin_mux_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
if (argc < 2)
return CMD_RET_USAGE;
if (strcmp(argv[1], "ifc") == 0)
config_board_mux(MUX_TYPE_IFC);
else if (strcmp(argv[1], "sdhc") == 0)
config_board_mux(MUX_TYPE_SDHC);
else
return CMD_RET_USAGE;
return 0;
}
U_BOOT_CMD(
mux, 2, 0, pin_mux_cmd,
"configure multiplexing pin for IFC/SDHC bus in runtime",
"bus_type (e.g. mux sdhc)"
);
#endif
Reference in a new issue View git blame Copy permalink