mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
1eaf61c84d
The device trees for the Beacon RZ/G2[MNH] boards have undergone some changes over time, so resync them now. Signed-off-by: Adam Ford <aford173@gmail.com>
335 lines
6.3 KiB
Text
335 lines
6.3 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2020, Compass Electronics Group, LLC
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/clk/versaclock.h>
|
|
|
|
/ {
|
|
memory@48000000 {
|
|
device_type = "memory";
|
|
/* first 128MB is reserved for secure area. */
|
|
reg = <0x0 0x48000000 0x0 0x78000000>;
|
|
};
|
|
|
|
osc_32k: osc_32k {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc_32k";
|
|
};
|
|
|
|
reg_1p8v: regulator0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
wlan_pwrseq: wlan_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>;
|
|
clocks = <&osc_32k>;
|
|
clock-names = "ext_clock";
|
|
post-power-on-delay-ms = <80>;
|
|
};
|
|
};
|
|
|
|
&avb {
|
|
pinctrl-0 = <&avb_pins>;
|
|
pinctrl-names = "default";
|
|
phy-mode = "rgmii-rxid";
|
|
phy-handle = <&phy0>;
|
|
rx-internal-delay-ps = <1800>;
|
|
tx-internal-delay-ps = <2000>;
|
|
clocks = <&cpg CPG_MOD 812>, <&versaclock5 4>;
|
|
clock-names = "fck", "refclk";
|
|
status = "okay";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-id004d.d074",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
|
reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&extal_clk {
|
|
clock-frequency = <16666666>;
|
|
};
|
|
|
|
&extalr_clk {
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
&gpio6 {
|
|
usb_hub_reset {
|
|
gpio-hog;
|
|
gpios = <10 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "usb-hub-reset";
|
|
};
|
|
};
|
|
|
|
&hscif0 {
|
|
pinctrl-0 = <&hscif0_pins>;
|
|
pinctrl-names = "default";
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm43438-bt";
|
|
shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>;
|
|
host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
|
device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
|
|
clocks = <&osc_32k>;
|
|
clock-names = "extclk";
|
|
max-speed = <4000000>;
|
|
};
|
|
};
|
|
|
|
&hscif2 {
|
|
status = "okay";
|
|
pinctrl-0 = <&hscif2_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&i2c4 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
|
|
pca9654: gpio@20 {
|
|
compatible = "onnn,pca9654";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-line-names =
|
|
"i2c4_20_0",
|
|
"wl_reg_on",
|
|
"bt_reg_on",
|
|
"i2c4_20_3",
|
|
"i2c4_20_4",
|
|
"bt_dev_wake",
|
|
"i2c4_20_6",
|
|
"i2c4_20_7";
|
|
};
|
|
|
|
pca9654_lte: gpio@21 {
|
|
compatible = "onnn,pca9654";
|
|
reg = <0x21>;
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-line-names =
|
|
"i2c4_21_0",
|
|
"zoe_pwr_on",
|
|
"zoe_extint",
|
|
"zoe_reset_n",
|
|
"sara_reset",
|
|
"i2c4_21_5",
|
|
"sara_pwr_off",
|
|
"sara_networking_status";
|
|
};
|
|
|
|
eeprom@50 {
|
|
compatible = "microchip,24c64", "atmel,24c64";
|
|
pagesize = <32>;
|
|
read-only; /* Manufacturing EEPROM programmed at factory */
|
|
reg = <0x50>;
|
|
};
|
|
|
|
rtc@51 {
|
|
compatible = "nxp,pcf85263";
|
|
reg = <0x51>;
|
|
};
|
|
|
|
versaclock5: versaclock_som@6a {
|
|
compatible = "idt,5p49v6965";
|
|
reg = <0x6a>;
|
|
#clock-cells = <1>;
|
|
clocks = <&x304_clk>;
|
|
clock-names = "xin";
|
|
/* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */
|
|
assigned-clocks = <&versaclock5 1>,
|
|
<&versaclock5 2>,
|
|
<&versaclock5 3>,
|
|
<&versaclock5 4>;
|
|
|
|
assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
|
|
|
|
OUT1 {
|
|
idt,mode = <VC5_CMOS>;
|
|
idt,voltage-microvolt = <1800000>;
|
|
idt,slew-percent = <100>;
|
|
};
|
|
|
|
OUT2 {
|
|
idt,mode = <VC5_CMOS>;
|
|
idt,voltage-microvolt = <1800000>;
|
|
idt,slew-percent = <100>;
|
|
};
|
|
|
|
OUT3 {
|
|
idt,mode = <VC5_CMOS>;
|
|
idt,voltage-microvolt = <1800000>;
|
|
idt,slew-percent = <100>;
|
|
};
|
|
|
|
OUT4 {
|
|
idt,mode = <VC5_CMOS>;
|
|
idt,voltage-microvolt = <3300000>;
|
|
idt,slew-percent = <100>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pfc {
|
|
pinctrl-0 = <&scif_clk_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
avb_pins: avb {
|
|
mux {
|
|
groups = "avb_link", "avb_mdio", "avb_mii";
|
|
function = "avb";
|
|
};
|
|
|
|
pins_mdio {
|
|
groups = "avb_mdio";
|
|
drive-strength = <24>;
|
|
};
|
|
|
|
pins_mii_tx {
|
|
pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
|
|
"PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
|
|
drive-strength = <12>;
|
|
};
|
|
};
|
|
|
|
scif2_pins: scif2 {
|
|
groups = "scif2_data_a";
|
|
function = "scif2";
|
|
};
|
|
|
|
hscif0_pins: hscif0 {
|
|
groups = "hscif0_data", "hscif0_ctrl";
|
|
function = "hscif0";
|
|
};
|
|
|
|
hscif1_pins: hscif1 {
|
|
groups = "hscif1_data_a", "hscif1_ctrl_a";
|
|
function = "hscif1";
|
|
};
|
|
|
|
hscif2_pins: hscif2 {
|
|
groups = "hscif2_data_a";
|
|
function = "hscif2";
|
|
};
|
|
|
|
scif0_pins: scif0 {
|
|
groups = "scif0_data";
|
|
function = "scif0";
|
|
};
|
|
|
|
scif5_pins: scif5 {
|
|
groups = "scif5_data_a";
|
|
function = "scif5";
|
|
};
|
|
|
|
scif_clk_pins: scif_clk {
|
|
groups = "scif_clk_a";
|
|
function = "scif_clk";
|
|
};
|
|
|
|
i2c0_pins: i2c0 {
|
|
groups = "i2c0";
|
|
function = "i2c0";
|
|
};
|
|
|
|
sdhi2_pins: sd2 {
|
|
groups = "sdhi2_data4", "sdhi2_ctrl";
|
|
function = "sdhi2";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
sdhi3_pins: sd3 {
|
|
groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
|
|
function = "sdhi3";
|
|
power-source = <1800>;
|
|
};
|
|
};
|
|
|
|
&scif_clk {
|
|
clock-frequency = <14745600>;
|
|
};
|
|
|
|
&scif2 {
|
|
pinctrl-0 = <&scif2_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhi2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhi2_pins>;
|
|
bus-width = <4>;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
non-removable;
|
|
cap-power-off-card;
|
|
pm-ignore-notify;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&wlan_pwrseq>;
|
|
status = "okay";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
brcmf: bcrmf@1 {
|
|
reg = <1>;
|
|
compatible = "brcm,bcm4329-fmac";
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-names = "host-wake";
|
|
};
|
|
};
|
|
|
|
&sdhi3 {
|
|
pinctrl-0 = <&sdhi3_pins>;
|
|
pinctrl-1 = <&sdhi3_pins>;
|
|
pinctrl-names = "default", "state_uhs";
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
bus-width = <8>;
|
|
mmc-hs200-1_8v;
|
|
no-sd;
|
|
no-sdio;
|
|
non-removable;
|
|
fixed-emmc-driver-type = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_clksel {
|
|
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
|
|
<&versaclock5 3>, <&usb3s0_clk>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3s0_clk {
|
|
clock-frequency = <100000000>;
|
|
};
|