u-boot/cmd/mvebu/Kconfig
Pali Rohár 4941652df5 cmd: mvebu/bubt: Enable command by default
This makes updating of u-boot/firmware on Marvell boards easier.

Signed-off-by: Pali Rohár <pali@kernel.org>
2023-03-01 06:39:17 +01:00

82 lines
2.2 KiB
Text

menu "MVEBU commands"
depends on ARCH_MVEBU
config CMD_MVEBU_BUBT
bool "bubt"
default y
select SHA256 if ARMADA_3700
select SHA512 if ARMADA_3700
select DOS_PARTITION if ARMADA_3700
select EFI_PARTITION if ARMADA_3700
select PARTITION_TYPE_GUID if ARMADA_3700
select MVEBU_EFUSE if ARMADA_38X || ARMADA_3700
help
bubt - Burn a u-boot image to flash
For details about bubt command please see the documentation
in doc/mvebu/cmd/bubt.txt
if CMD_MVEBU_BUBT
choice
prompt "Flash for image"
default MVEBU_SPI_BOOT if MVEBU_SPL_BOOT_DEVICE_SPI
default MVEBU_NAND_BOOT if MVEBU_SPL_BOOT_DEVICE_NAND
default MVEBU_MMC_BOOT if MVEBU_SPL_BOOT_DEVICE_MMC
default MVEBU_SATA_BOOT if MVEBU_SPL_BOOT_DEVICE_SATA
default MVEBU_SPI_BOOT
config MVEBU_NAND_BOOT
bool "NAND flash boot"
depends on NAND_PXA3XX
help
Enable boot from NAND flash.
Allow usage of NAND flash as a target for "bubt" command
For details about bubt command please see the documentation
in doc/mvebu/cmd/bubt.txt
config MVEBU_SPI_BOOT
bool "SPI flash boot"
depends on SPI_FLASH
help
Enable boot from SPI flash.
Allow usage of SPI flash as a target for "bubt" command
For details about bubt command please see the documentation
in doc/mvebu/cmd/bubt.txt
config MVEBU_MMC_BOOT
bool "eMMC flash boot"
depends on MVEBU_MMC || MMC_SDHCI_XENON
help
Enable boot from eMMC boot partition
Allow usage of eMMC/SD device as a target for "bubt" command
For details about bubt command please see the documentation
in doc/mvebu/cmd/bubt.txt
config MVEBU_SATA_BOOT
bool "SATA flash boot"
depends on SCSI
help
Enable boot from SATA disk.
Allow usage of SATA disk as a target for "bubt" command
For details about bubt command please see the documentation
in doc/mvebu/cmd/bubt.txt
endchoice
config MVEBU_UBOOT_DFLT_NAME
string "Default image name for bubt command"
default BUILD_TARGET if ARMADA_32BIT && BUILD_TARGET != ""
default "flash-image.bin"
help
This option should contain a default file name to be used with
MVEBU "bubt" command if the source file name is omitted
endif
config CMD_MVEBU_COMPHY_RX_TRAINING
bool "mvebu_comphy_rx_training"
depends on ARMADA_8K
help
Perform COMPHY RX training sequence
endmenu