u-boot/board/pn62/misc.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

219 lines
4.6 KiB
C

/*
* (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc824x.h>
#include <asm/io.h>
#include <pci.h>
#include "pn62.h"
typedef struct {
pci_dev_t devno;
volatile u32 *csr;
} i2155x_t;
static i2155x_t i2155x = { 0, NULL };
static struct pci_device_id i2155x_ids[] = {
{ 0x1011, 0x0046 }, /* i21554 */
{ 0x8086, 0xb555 } /* i21555 */
};
int i2155x_init(void)
{
pci_dev_t devno;
u32 val;
int i;
/*
* Find the Intel bridge.
*/
if ((devno = pci_find_devices(i2155x_ids, 0)) < 0) {
printf("Error: Intel bridge 2155x not found!\n");
return -1;
}
i2155x.devno = devno;
/*
* Get auto-configured base address for CSR access.
*/
pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &val);
if (val & PCI_BASE_ADDRESS_SPACE_IO) {
val &= PCI_BASE_ADDRESS_IO_MASK;
i2155x.csr = (volatile u32 *)(_IO_BASE + val);
} else {
val &= PCI_BASE_ADDRESS_MEM_MASK;
i2155x.csr = (volatile u32 *)val;
}
/*
* Translate downstream memory 2 (bar3) to base of shared memory.
*/
i2155x_set_bar_base(3, PN62_SMEM_DEFAULT);
/*
* Enable memory space, I/O space and bus master bits
* in both Primary and Secondary command registers.
*/
val = PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER|PCI_COMMAND_IO;
pci_write_config_word(devno, 0x44, val);
pci_write_config_word(devno, 0x04, val);
/*
* Clear scratchpad registers.
*/
for (i = 0; i < (I2155X_SCRAPAD_MAX - 1); i++) {
i2155x_write_scrapad(i, 0x0);
}
/*
* Set interrupt line for Linux.
*/
pci_write_config_byte(devno, PCI_INTERRUPT_LINE, 3);
return 0;
}
/*
* Access the Scratchpad registers 0..7 of the Intel bridge.
*/
void i2155x_write_scrapad(int idx, u32 val)
{
if (idx >= 0 && idx < I2155X_SCRAPAD_MAX)
out_le32(i2155x.csr + (I2155X_SCRAPAD_ADDR/4) + idx, val);
else
printf("i2155x_write_scrapad: invalid index\n");
}
u32 i2155x_read_scrapad(int idx)
{
if (idx >= 0 && idx < I2155X_SCRAPAD_MAX)
return in_le32(i2155x.csr + (I2155X_SCRAPAD_ADDR/4) + idx);
else
printf("i2155x_read_scrapad: invalid index\n");
return -1;
}
void i2155x_set_bar_base(int bar, u32 base)
{
if (bar >= 2 && bar <= 4) {
pci_write_config_dword(i2155x.devno,
I2155X_BAR2_BASE + (bar - 2) * 4,
base);
}
}
/*
* Read Vital Product Data (VPD) from the Serial EPROM attached
* to the Intel bridge.
*/
int i2155x_read_vpd(int offset, int size, unsigned char *data)
{
int i, n;
u16 val16;
for (i = 0; i < size; i++) {
pci_write_config_word(i2155x.devno, I2155X_VPD_ADDR,
offset + i - I2155X_VPD_START);
for (n = 10000; n > 0; n--) {
pci_read_config_word(i2155x.devno, I2155X_VPD_ADDR, &val16);
if ((val16 & 0x8000) != 0) /* wait for completion */
break;
udelay(100);
}
if (n == 0) {
printf("i2155x_read_vpd: TIMEOUT\n");
return -1;
}
pci_read_config_byte(i2155x.devno, I2155X_VPD_DATA, &data[i]);
}
return i;
}
static struct pci_device_id am79c95x_ids [] = {
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE },
{ }
};
/*
* Initialize the AMD ethernet controllers.
*/
int am79c95x_init(void)
{
pci_dev_t devno;
int i;
/*
* Set interrupt line for Linux.
*/
for (i = 0; i < 2; i++) {
if ((devno = pci_find_devices(am79c95x_ids, i)) < 0)
break;
pci_write_config_byte(devno, PCI_INTERRUPT_LINE, 2+i);
}
if (i < 2)
printf("Error: Only %d AMD Ethernet Controller found!\n", i);
return 0;
}
void set_led(unsigned int number, unsigned int function)
{
volatile u8 *addr;
if ((number >= 0) && (number < PN62_LED_MAX) &&
(function >= 0) && (function <= LED_LAST_FUNCTION)) {
addr = (volatile u8 *)(PN62_LED_BASE + number * 8);
out_8(addr, function&0xff);
}
}
/*
* Show fatal error indicated by Kinght Rider(tm) effect
* in LEDS 0-7. LEDS 8-11 contain 4 bit error code.
* Note: this function will not terminate.
*/
void fatal_error(unsigned int error_code)
{
int i, d;
for (i = 0; i < 12; i++) {
set_led(i, LED_0);
}
/*
* Write error code.
*/
set_led(8, (error_code & 0x01) ? LED_1 : LED_0);
set_led(9, (error_code & 0x02) ? LED_1 : LED_0);
set_led(10, (error_code & 0x04) ? LED_1 : LED_0);
set_led(11, (error_code & 0x08) ? LED_1 : LED_0);
/*
* Yay - Knight Rider effect!
*/
while(1) {
unsigned int delay = 2000;
for (i = 0; i < 8; i++) {
set_led(i, LED_1);
for (d = 0; d < delay; d++);
set_led(i, LED_0);
}
for (i = 7; i > 0; i--) {
set_led(i, LED_1);
for (d = 0; d < delay; d++);
set_led(i, LED_0);
}
}
}