Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-29 22:43:10 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/gateworks/venice/spl.c
Tim Harvey 2cb156e126 board: gateworks: venice: add imx8mn-gw7902 support 
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
 - LPDDR4 DRAM
 - eMMC FLASH
 - Gateworks System Controller
 - LTE CAT M1 modem
 - USB 2.0 HUB
 - M.2 Socket with USB2.0, PCIe, and dual-SIM
 - IMX8M FEC
 - PCIe based GbE
 - RS232/RS485/RS422 serial transceiver
 - GPS
 - CAN bus
 - WiFi / Bluetooth
 - MIPI header (DSI/CSI/GPIO/PWM/I2S)
 - PMIC

To add support for the i.MX8M Nano GW7902:
 - Add imx8mn-venice dts/defconfig/include
 - Add imx8mn-gw7902 dts
 - Add imx8mn-2gb lpddr4 dram configs
 - Add misc support for IMX8M Nano SoC
 - rename imx8mm-venice.c to venice.c as it is no longer imx8mm specific
 - update README with differences for IMX8MN vs IMX8MM

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-19 14:46:54 +01:00

296 lines
6.9 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2021 Gateworks Corporation
*/
#include <common.h>
#include <cpu_func.h>
#include <hang.h>
#include <i2c.h>
#include <image.h>
#include <init.h>
#include <log.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/mach-imx/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx8mm_pins.h>
#include <asm/arch/imx8mn_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/arch/ddr.h>
#include <asm-generic/gpio.h>
#include <dm/uclass.h>
#include <dm/device.h>
#include <dm/uclass-internal.h>
#include <dm/device-internal.h>
#include <power/bd71837.h>
#include <power/mp5416.h>
#include "gsc.h"
#include "lpddr4_timing.h"
#define PCIE_RSTN IMX_GPIO_NR(4, 6)
DECLARE_GLOBAL_DATA_PTR;
static void spl_dram_init(int size)
{
struct dram_timing_info *dram_timing;
switch (size) {
#ifdef CONFIG_IMX8MM
case 1:
dram_timing = &dram_timing_1gb;
break;
case 2:
dram_timing = &dram_timing_2gb;
break;
case 4:
dram_timing = &dram_timing_4gb;
break;
default:
printf("Unknown DDR configuration: %d GiB\n", size);
dram_timing = &dram_timing_1gb;
size = 1;
#endif
#ifdef CONFIG_IMX8MN
case 1:
dram_timing = &dram_timing_1gb_single_die;
break;
case 2:
if (!strcmp(gsc_get_model(), "GW7902-SP466-A") ||
!strcmp(gsc_get_model(), "GW7902-SP466-B")) {
dram_timing = &dram_timing_2gb_dual_die;
} else {
dram_timing = &dram_timing_2gb_single_die;
}
break;
default:
printf("Unknown DDR configuration: %d GiB\n", size);
dram_timing = &dram_timing_2gb_dual_die;
size = 2;
#endif
}
printf("DRAM : LPDDR4 %d GiB\n", size);
ddr_init(dram_timing);
}
#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
#ifdef CONFIG_IMX8MM
static iomux_v3_cfg_t const uart_pads[] = {
IMX8MM_PAD_UART2_RXD_UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
IMX8MM_PAD_UART2_TXD_UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static iomux_v3_cfg_t const wdog_pads[] = {
IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
};
#endif
#ifdef CONFIG_IMX8MN
static const iomux_v3_cfg_t uart_pads[] = {
IMX8MN_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
IMX8MN_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static const iomux_v3_cfg_t wdog_pads[] = {
IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
};
#endif
int board_early_init_f(void)
{
struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
set_wdog_reset(wdog);
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
return 0;
}
/*
* Model specific PMIC adjustments necessary prior to DRAM init
*
* Note that we can not use pmic dm drivers here as we have a generic
* venice dt that does not have board-specific pmic's defined.
*
* Instead we must use dm_i2c so we a helpers to give us
* clrsetbit functions we would otherwise have if we could use PMIC dm
* drivers.
*/
static int dm_i2c_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set)
{
int ret;
u8 val;
ret = dm_i2c_read(dev, reg, &val, 1);
if (ret)
return ret;
val = (val & ~clr) | set;
return dm_i2c_write(dev, reg, &val, 1);
}
static int power_init_board(void)
{
const char *model = gsc_get_model();
struct udevice *bus;
struct udevice *dev;
int ret;
if ((!strncmp(model, "GW71", 4)) ||
(!strncmp(model, "GW72", 4)) ||
(!strncmp(model, "GW73", 4))) {
ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus);
if (ret) {
printf("PMIC : failed I2C1 probe: %d\n", ret);
return ret;
}
ret = dm_i2c_probe(bus, 0x69, 0, &dev);
if (ret) {
printf("PMIC : failed probe: %d\n", ret);
return ret;
}
puts("PMIC : MP5416\n");
/* set VDD_ARM SW3 to 0.92V for 1.6GHz */
dm_i2c_reg_write(dev, MP5416_VSET_SW3,
BIT(7) | MP5416_VSET_SW3_SVAL(920000));
}
else if ((!strncmp(model, "GW7901", 6)) ||
(!strncmp(model, "GW7902", 6))) {
if (!strncmp(model, "GW7901", 6))
ret = uclass_get_device_by_seq(UCLASS_I2C, 1, &bus);
else
ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus);
if (ret) {
printf("PMIC : failed I2C2 probe: %d\n", ret);
return ret;
}
ret = dm_i2c_probe(bus, 0x4b, 0, &dev);
if (ret) {
printf("PMIC : failed probe: %d\n", ret);
return ret;
}
puts("PMIC : BD71847\n");
/* unlock the PMIC regs */
dm_i2c_reg_write(dev, BD718XX_REGLOCK, 0x1);
/* set switchers to forced PWM mode */
dm_i2c_clrsetbits(dev, BD718XX_BUCK1_CTRL, 0, 0x8);
dm_i2c_clrsetbits(dev, BD718XX_BUCK2_CTRL, 0, 0x8);
dm_i2c_clrsetbits(dev, BD718XX_1ST_NODVS_BUCK_CTRL, 0, 0x8);
dm_i2c_clrsetbits(dev, BD718XX_2ND_NODVS_BUCK_CTRL, 0, 0x8);
dm_i2c_clrsetbits(dev, BD718XX_3RD_NODVS_BUCK_CTRL, 0, 0x8);
dm_i2c_clrsetbits(dev, BD718XX_4TH_NODVS_BUCK_CTRL, 0, 0x8);
/* increase VDD_0P95 (VDD_GPU/VPU/DRAM) to 0.975v for 1.5Ghz DDR */
dm_i2c_reg_write(dev, BD718XX_1ST_NODVS_BUCK_VOLT, 0x83);
/* increase VDD_SOC to 0.85v before first DRAM access */
dm_i2c_reg_write(dev, BD718XX_BUCK1_VOLT_RUN, 0x0f);
/* increase VDD_ARM to 0.92v for 800 and 1600Mhz */
dm_i2c_reg_write(dev, BD718XX_BUCK2_VOLT_RUN, 0x16);
/* Lock the PMIC regs */
dm_i2c_reg_write(dev, BD718XX_REGLOCK, 0x11);
}
return 0;
}
void board_init_f(ulong dummy)
{
struct udevice *dev;
int ret;
int dram_sz;
arch_cpu_init();
init_uart_clk(1);
board_early_init_f();
timer_init();
preloader_console_init();
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
ret = spl_early_init();
if (ret) {
debug("spl_early_init() failed: %d\n", ret);
hang();
}
ret = uclass_get_device_by_name(UCLASS_CLK,
"clock-controller@30380000",
&dev);
if (ret < 0) {
printf("Failed to find clock node. Check device tree\n");
hang();
}
enable_tzc380();
/* need to hold PCIe switch in reset otherwise it can lock i2c bus EEPROM is on */
gpio_request(PCIE_RSTN, "perst#");
gpio_direction_output(PCIE_RSTN, 0);
/* GSC */
dram_sz = gsc_init(0);
/* PMIC */
power_init_board();
/* DDR initialization */
spl_dram_init(dram_sz);
board_init_r(NULL, 0);
}
/* determine prioritized order of boot devices to load U-Boot from */
void board_boot_order(u32 *spl_boot_list)
{
/*
* If the SPL was loaded via serial loader, we try to get
* U-Boot proper via USB SDP.
*/
if (spl_boot_device() == BOOT_DEVICE_BOARD)
spl_boot_list[0] = BOOT_DEVICE_BOARD;
/* we have only eMMC in default venice dt */
spl_boot_list[0] = BOOT_DEVICE_MMC1;
}
/* return boot device based on where the SPL was loaded from */
int spl_board_boot_device(enum boot_device boot_dev_spl)
{
switch (boot_dev_spl) {
case USB_BOOT:
return BOOT_DEVICE_BOARD;
/* SDHC2 */
case SD2_BOOT:
case MMC2_BOOT:
return BOOT_DEVICE_MMC1;
/* SDHC3 */
case SD3_BOOT:
case MMC3_BOOT:
return BOOT_DEVICE_MMC2;
default:
return BOOT_DEVICE_NONE;
}
}
Reference in a new issue View git blame Copy permalink