mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
73ced87e9a
With the latest changes to add support for the Chromebook Bob, initialisation through debug_uart_init() did no longer get called for other targets. Fix this, by moving debug_uart_init() out of the Bob-specific Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
261 lines
6.7 KiB
C
261 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
|
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <debug_uart.h>
|
|
#include <dm.h>
|
|
#include <ram.h>
|
|
#include <spl.h>
|
|
#include <spl_gpio.h>
|
|
#include <syscon.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/bootrom.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/grf_rk3399.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/periph.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <dm/pinctrl.h>
|
|
|
|
void board_return_to_bootrom(void)
|
|
{
|
|
back_to_bootrom(BROM_BOOT_NEXTSTAGE);
|
|
}
|
|
|
|
static const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
|
|
[BROM_BOOTSOURCE_EMMC] = "/sdhci@fe330000",
|
|
[BROM_BOOTSOURCE_SPINOR] = "/spi@ff1d0000",
|
|
[BROM_BOOTSOURCE_SD] = "/dwmmc@fe320000",
|
|
};
|
|
|
|
const char *board_spl_was_booted_from(void)
|
|
{
|
|
u32 bootdevice_brom_id = readl(RK3399_BROM_BOOTSOURCE_ID_ADDR);
|
|
const char *bootdevice_ofpath = NULL;
|
|
|
|
if (bootdevice_brom_id < ARRAY_SIZE(boot_devices))
|
|
bootdevice_ofpath = boot_devices[bootdevice_brom_id];
|
|
|
|
if (bootdevice_ofpath)
|
|
debug("%s: brom_bootdevice_id %x maps to '%s'\n",
|
|
__func__, bootdevice_brom_id, bootdevice_ofpath);
|
|
else
|
|
debug("%s: failed to resolve brom_bootdevice_id %x\n",
|
|
__func__, bootdevice_brom_id);
|
|
|
|
return bootdevice_ofpath;
|
|
}
|
|
|
|
u32 spl_boot_device(void)
|
|
{
|
|
u32 boot_device = BOOT_DEVICE_MMC1;
|
|
|
|
if (CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM))
|
|
return BOOT_DEVICE_BOOTROM;
|
|
|
|
return boot_device;
|
|
}
|
|
|
|
const char *spl_decode_boot_device(u32 boot_device)
|
|
{
|
|
int i;
|
|
static const struct {
|
|
u32 boot_device;
|
|
const char *ofpath;
|
|
} spl_boot_devices_tbl[] = {
|
|
{ BOOT_DEVICE_MMC1, "/dwmmc@fe320000" },
|
|
{ BOOT_DEVICE_MMC2, "/sdhci@fe330000" },
|
|
{ BOOT_DEVICE_SPI, "/spi@ff1d0000" },
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(spl_boot_devices_tbl); ++i)
|
|
if (spl_boot_devices_tbl[i].boot_device == boot_device)
|
|
return spl_boot_devices_tbl[i].ofpath;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
void spl_perform_fixups(struct spl_image_info *spl_image)
|
|
{
|
|
void *blob = spl_image->fdt_addr;
|
|
const char *boot_ofpath;
|
|
int chosen;
|
|
|
|
/*
|
|
* Inject the ofpath of the device the full U-Boot (or Linux in
|
|
* Falcon-mode) was booted from into the FDT, if a FDT has been
|
|
* loaded at the same time.
|
|
*/
|
|
if (!blob)
|
|
return;
|
|
|
|
boot_ofpath = spl_decode_boot_device(spl_image->boot_device);
|
|
if (!boot_ofpath) {
|
|
pr_err("%s: could not map boot_device to ofpath\n", __func__);
|
|
return;
|
|
}
|
|
|
|
chosen = fdt_find_or_add_subnode(blob, 0, "chosen");
|
|
if (chosen < 0) {
|
|
pr_err("%s: could not find/create '/chosen'\n", __func__);
|
|
return;
|
|
}
|
|
fdt_setprop_string(blob, chosen,
|
|
"u-boot,spl-boot-device", boot_ofpath);
|
|
}
|
|
|
|
#define TIMER_CHN10_BASE 0xff8680a0
|
|
#define TIMER_END_COUNT_L 0x00
|
|
#define TIMER_END_COUNT_H 0x04
|
|
#define TIMER_INIT_COUNT_L 0x10
|
|
#define TIMER_INIT_COUNT_H 0x14
|
|
#define TIMER_CONTROL_REG 0x1c
|
|
|
|
#define TIMER_EN 0x1
|
|
#define TIMER_FMODE (0 << 1)
|
|
#define TIMER_RMODE (1 << 1)
|
|
|
|
void secure_timer_init(void)
|
|
{
|
|
writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_L);
|
|
writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_H);
|
|
writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_L);
|
|
writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_H);
|
|
writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG);
|
|
}
|
|
|
|
void board_debug_uart_init(void)
|
|
{
|
|
#define GRF_BASE 0xff770000
|
|
#define GPIO0_BASE 0xff720000
|
|
#define PMUGRF_BASE 0xff320000
|
|
struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
|
|
#ifdef CONFIG_TARGET_CHROMEBOOK_BOB
|
|
struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
|
|
struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
|
|
#endif
|
|
|
|
#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
|
|
/* Enable early UART0 on the RK3399 */
|
|
rk_clrsetreg(&grf->gpio2c_iomux,
|
|
GRF_GPIO2C0_SEL_MASK,
|
|
GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
|
|
rk_clrsetreg(&grf->gpio2c_iomux,
|
|
GRF_GPIO2C1_SEL_MASK,
|
|
GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
|
|
#else
|
|
# ifdef CONFIG_TARGET_CHROMEBOOK_BOB
|
|
rk_setreg(&grf->io_vsel, 1 << 0);
|
|
|
|
/*
|
|
* Let's enable these power rails here, we are already running the SPI
|
|
* Flash based code.
|
|
*/
|
|
spl_gpio_output(gpio, GPIO(BANK_B, 2), 1); /* PP1500_EN */
|
|
spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 2), GPIO_PULL_NORMAL);
|
|
|
|
spl_gpio_output(gpio, GPIO(BANK_B, 4), 1); /* PP3000_EN */
|
|
spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_B, 4), GPIO_PULL_NORMAL);
|
|
#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
|
|
|
|
/* Enable early UART2 channel C on the RK3399 */
|
|
rk_clrsetreg(&grf->gpio4c_iomux,
|
|
GRF_GPIO4C3_SEL_MASK,
|
|
GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
|
|
rk_clrsetreg(&grf->gpio4c_iomux,
|
|
GRF_GPIO4C4_SEL_MASK,
|
|
GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
|
|
/* Set channel C as UART2 input */
|
|
rk_clrsetreg(&grf->soc_con7,
|
|
GRF_UART_DBG_SEL_MASK,
|
|
GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
|
|
#endif
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
struct udevice *pinctrl;
|
|
struct udevice *dev;
|
|
struct rk3399_pmusgrf_regs *sgrf;
|
|
struct rk3399_grf_regs *grf;
|
|
int ret;
|
|
|
|
#define EARLY_UART
|
|
#ifdef EARLY_UART
|
|
debug_uart_init();
|
|
|
|
# ifdef CONFIG_TARGET_CHROMEBOOK_BOB
|
|
int sum, i;
|
|
|
|
/*
|
|
* Add a delay and ensure that the compiler does not optimise this out.
|
|
* This is needed since the power rails tail a while to turn on, and
|
|
* we get garbage serial output otherwise.
|
|
*/
|
|
sum = 0;
|
|
for (i = 0; i < 150000; i++)
|
|
sum += i;
|
|
gru_dummy_function(sum);
|
|
#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
|
|
|
|
/*
|
|
* Debug UART can be used from here if required:
|
|
*
|
|
* debug_uart_init();
|
|
* printch('a');
|
|
* printhex8(0x1234);
|
|
* printascii("string");
|
|
*/
|
|
printascii("U-Boot SPL board init\n");
|
|
#endif
|
|
|
|
ret = spl_early_init();
|
|
if (ret) {
|
|
debug("spl_early_init() failed: %d\n", ret);
|
|
hang();
|
|
}
|
|
|
|
/*
|
|
* Disable DDR and SRAM security regions.
|
|
*
|
|
* As we are entered from the BootROM, the region from
|
|
* 0x0 through 0xfffff (i.e. the first MB of memory) will
|
|
* be protected. This will cause issues with the DW_MMC
|
|
* driver, which tries to DMA from/to the stack (likely)
|
|
* located in this range.
|
|
*/
|
|
sgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF);
|
|
rk_clrsetreg(&sgrf->ddr_rgn_con[16], 0x1ff, 0);
|
|
rk_clrreg(&sgrf->slv_secure_con4, 0x2000);
|
|
|
|
/* eMMC clock generator: disable the clock multipilier */
|
|
grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
rk_clrreg(&grf->emmccore_con[11], 0x0ff);
|
|
|
|
secure_timer_init();
|
|
|
|
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
|
|
if (ret) {
|
|
pr_err("Pinctrl init failed: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
|
|
if (ret) {
|
|
pr_err("DRAM init failed: %d\n", ret);
|
|
return;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_LOAD_FIT
|
|
int board_fit_config_name_match(const char *name)
|
|
{
|
|
/* Just empty function now - can't decide what to choose */
|
|
debug("%s: %s\n", __func__, name);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|