mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 18:10:13 +00:00
48c6f328f0
T1024RDB is a Freescale Reference Design Board that hosts the T1024 SoC. T1024RDB board Overview ----------------------- - T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz - CoreNet fabric supporting coherent and noncoherent transactions with prioritization and bandwidth allocation - 32-/64-bit DDR3L SDRAM memory controller with ECC and interleaving support - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC - Ethernet interfaces: - Two 10M/100M/1G RGMII ports on-board - one 10Gbps XFI interface - PCIe: Three PCIe controllers: one PCIe Slot and two Mini-PCIe connectors. - SerDes: 4 lanes up to 10.3125GHz - IFC: 128MB NOR Flash, 512MB NAND Flash and CPLD - eSPI: 64MB N25Q512 SPI flash. - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) - USB: Two Type-A USB2.0 ports with internal PHY - eSDHC: Support SD, SDHC, SDXC and MMC/eMMC - I2C: Four I2C controllers - UART: Two UART serial ports Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> [York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT Fix Kconfig by adding SUPPORT_SPL] Reviewed-by: York Sun <yorksun@freescale.com>
100 lines
2.3 KiB
C
100 lines
2.3 KiB
C
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <netdev.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_portals.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <malloc.h>
|
|
#include <fm_eth.h>
|
|
#include <fsl_mdio.h>
|
|
#include <miiphy.h>
|
|
#include <phy.h>
|
|
#include <asm/fsl_dtsec.h>
|
|
#include <asm/fsl_serdes.h>
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#if defined(CONFIG_FMAN_ENET)
|
|
int i, interface;
|
|
struct memac_mdio_info dtsec_mdio_info;
|
|
struct memac_mdio_info tgec_mdio_info;
|
|
struct mii_dev *dev;
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 srds_s1;
|
|
|
|
srds_s1 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
|
|
srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
|
|
|
dtsec_mdio_info.regs =
|
|
(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
|
|
|
|
dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
|
|
|
|
/* Register the 1G MDIO bus */
|
|
fm_memac_mdio_init(bis, &dtsec_mdio_info);
|
|
|
|
tgec_mdio_info.regs =
|
|
(struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
|
|
tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
|
|
|
|
/* Register the 10G MDIO bus */
|
|
fm_memac_mdio_init(bis, &tgec_mdio_info);
|
|
|
|
/* Set the two on-board RGMII PHY address */
|
|
fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY1_ADDR);
|
|
|
|
switch (srds_s1) {
|
|
case 0x95:
|
|
/* 10G XFI with Aquantia PHY */
|
|
fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
|
|
break;
|
|
default:
|
|
printf("SerDes protocol 0x%x is not supported on T102xRDB\n",
|
|
srds_s1);
|
|
break;
|
|
}
|
|
|
|
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
|
|
interface = fm_info_get_enet_if(i);
|
|
switch (interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
|
|
fm_info_set_mdio(i, dev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
|
|
switch (fm_info_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_XGMII:
|
|
dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
|
|
fm_info_set_mdio(i, dev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
cpu_eth_init(bis);
|
|
#endif /* CONFIG_FMAN_ENET */
|
|
|
|
return pci_eth_init(bis);
|
|
}
|
|
|
|
void fdt_fixup_board_enet(void *fdt)
|
|
{
|
|
}
|