mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
fe4a967575
Future gdsys boards will switch from the legacy drivers in board/gdsys/common to DM-based drivers. Define a Kconfig option that disables the legacy drivers. Signed-off-by: Mario Six <mario.six@gdsys.cc>
161 lines
4.2 KiB
C
161 lines
4.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2012
|
|
* Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
|
|
*/
|
|
|
|
/* Parade Technologies Inc. DP501 DisplayPort DVI/HDMI Transmitter */
|
|
|
|
#ifdef CONFIG_GDSYS_LEGACY_DRIVERS
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <errno.h>
|
|
#include <i2c.h>
|
|
|
|
#define DP501_I2C_ADDR 0x08
|
|
|
|
#ifdef CONFIG_SYS_DP501_I2C
|
|
int dp501_i2c[] = CONFIG_SYS_DP501_I2C;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DP501_BASE
|
|
int dp501_base[] = CONFIG_SYS_DP501_BASE;
|
|
#endif
|
|
|
|
static void dp501_setbits(u8 addr, u8 reg, u8 mask)
|
|
{
|
|
u8 val;
|
|
|
|
val = i2c_reg_read(addr, reg);
|
|
setbits_8(&val, mask);
|
|
i2c_reg_write(addr, reg, val);
|
|
}
|
|
|
|
static void dp501_clrbits(u8 addr, u8 reg, u8 mask)
|
|
{
|
|
u8 val;
|
|
|
|
val = i2c_reg_read(addr, reg);
|
|
clrbits_8(&val, mask);
|
|
i2c_reg_write(addr, reg, val);
|
|
}
|
|
|
|
static int dp501_detect_cable_adapter(u8 addr)
|
|
{
|
|
u8 val = i2c_reg_read(addr, 0x00);
|
|
|
|
return !(val & 0x04);
|
|
}
|
|
|
|
static void dp501_link_training(u8 addr)
|
|
{
|
|
u8 val;
|
|
u8 link_bw;
|
|
u8 max_lane_cnt;
|
|
u8 lane_cnt;
|
|
|
|
val = i2c_reg_read(addr, 0x51);
|
|
if (val >= 0x0a)
|
|
link_bw = 0x0a;
|
|
else
|
|
link_bw = 0x06;
|
|
if (link_bw != val)
|
|
printf("DP sink supports %d Mbps link rate, set to %d Mbps\n",
|
|
val * 270, link_bw * 270);
|
|
i2c_reg_write(addr, 0x5d, link_bw); /* set link_bw */
|
|
val = i2c_reg_read(addr, 0x52);
|
|
max_lane_cnt = val & 0x1f;
|
|
if (max_lane_cnt >= 4)
|
|
lane_cnt = 4;
|
|
else
|
|
lane_cnt = max_lane_cnt;
|
|
if (lane_cnt != max_lane_cnt)
|
|
printf("DP sink supports %d lanes, set to %d lanes\n",
|
|
max_lane_cnt, lane_cnt);
|
|
i2c_reg_write(addr, 0x5e, lane_cnt | (val & 0x80)); /* set lane_cnt */
|
|
val = i2c_reg_read(addr, 0x53);
|
|
i2c_reg_write(addr, 0x5c, val); /* set downspread_ctl */
|
|
|
|
i2c_reg_write(addr, 0x5f, 0x0d); /* start training */
|
|
}
|
|
|
|
void dp501_powerup(u8 addr)
|
|
{
|
|
dp501_clrbits(addr, 0x0a, 0x30); /* power on encoder */
|
|
dp501_setbits(addr, 0x0a, 0x0e); /* block HDCP and MCCS on I2C bride*/
|
|
i2c_reg_write(addr, 0x27, 0x30); /* Hardware auto detect DVO timing */
|
|
dp501_setbits(addr, 0x72, 0x80); /* DPCD read enable */
|
|
dp501_setbits(addr, 0x30, 0x20); /* RS polynomial select */
|
|
i2c_reg_write(addr, 0x71, 0x20); /* Enable Aux burst write */
|
|
dp501_setbits(addr, 0x78, 0x30); /* Disable HPD2 IRQ */
|
|
dp501_clrbits(addr, 0x2f, 0x40); /* Link FIFO reset selection */
|
|
dp501_clrbits(addr, 0x60, 0x20); /* Enable scrambling */
|
|
|
|
#ifdef CONFIG_SYS_DP501_VCAPCTRL0
|
|
i2c_reg_write(addr, 0x24, CONFIG_SYS_DP501_VCAPCTRL0);
|
|
#else
|
|
i2c_reg_write(addr, 0x24, 0xc0); /* SDR mode 0, ext. H/VSYNC */
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DP501_DIFFERENTIAL
|
|
i2c_reg_write(addr + 2, 0x24, 0x10); /* clock input differential */
|
|
i2c_reg_write(addr + 2, 0x25, 0x04);
|
|
i2c_reg_write(addr + 2, 0x26, 0x10);
|
|
#else
|
|
i2c_reg_write(addr + 2, 0x24, 0x02); /* clock input single ended */
|
|
#endif
|
|
|
|
i2c_reg_write(addr + 2, 0x1a, 0x04); /* SPDIF input method TTL */
|
|
|
|
i2c_reg_write(addr + 2, 0x00, 0x18); /* driving strength */
|
|
i2c_reg_write(addr + 2, 0x03, 0x06); /* driving strength */
|
|
i2c_reg_write(addr, 0x2c, 0x00); /* configure N value */
|
|
i2c_reg_write(addr, 0x2d, 0x00); /* configure N value */
|
|
i2c_reg_write(addr, 0x2e, 0x0c); /* configure N value */
|
|
i2c_reg_write(addr, 0x76, 0xff); /* clear all interrupt */
|
|
dp501_setbits(addr, 0x78, 0x03); /* clear all interrupt */
|
|
i2c_reg_write(addr, 0x75, 0xf8); /* aux channel reset */
|
|
i2c_reg_write(addr, 0x75, 0x00); /* clear aux channel reset */
|
|
i2c_reg_write(addr, 0x87, 0x7f); /* set retry counter as 7
|
|
retry interval 400us */
|
|
|
|
if (dp501_detect_cable_adapter(addr)) {
|
|
printf("DVI/HDMI cable adapter detected\n");
|
|
i2c_reg_write(addr, 0x5e, 0x04); /* enable 4 channel */
|
|
dp501_clrbits(addr, 0x00, 0x08); /* DVI/HDMI HDCP operation */
|
|
} else {
|
|
printf("no DVI/HDMI cable adapter detected\n");
|
|
dp501_setbits(addr, 0x00, 0x08); /* for DP HDCP operation */
|
|
|
|
dp501_link_training(addr);
|
|
}
|
|
}
|
|
|
|
void dp501_powerdown(u8 addr)
|
|
{
|
|
dp501_setbits(addr, 0x0a, 0x30); /* power down encoder, standby mode */
|
|
}
|
|
|
|
|
|
int dp501_probe(unsigned screen, bool power)
|
|
{
|
|
#ifdef CONFIG_SYS_DP501_BASE
|
|
uint8_t dp501_addr = dp501_base[screen];
|
|
#else
|
|
uint8_t dp501_addr = DP501_I2C_ADDR;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DP501_I2C
|
|
i2c_set_bus_num(dp501_i2c[screen]);
|
|
#endif
|
|
|
|
if (i2c_probe(dp501_addr))
|
|
return -1;
|
|
|
|
dp501_powerup(dp501_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */
|