u-boot/configs/Mele_A1000G_quad_defconfig
Hans de Goede 2c23da06ba sunxi: Add new Mele_A1000G_quad defconfig
The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been
using the same defconfig (and dts on the kernel side) for both models.
Unfortunately this does not work for the otg controller, on the M9 this
is routed to a micro-usb connector on the outside, while as on the
A1000G-quad it is connected to an usb to sata bridge.

This commit adds a new defconfig for the Mele-A1000G-quad to allow using
different otg controller settings on the 2 boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-06-04 14:11:23 +02:00

24 lines
910 B
Text

# The Mele A1000G quad is yet another Allwinnner based Android top set box
# from Mele.
#
# It uses the same case as the original Mele A1000 and the same PCB as the M9,
# the USM sata storage slot is connected via anusb to sata bridge connected to
# the otg controller, this renders the micro USB B receptacle non functional.
#
# It features an A31 SoC, 2G RAM, 16G Nand, 100Mbit ethernet, HDMI out,
# 3 USB A receptacles, 3.5 mm jack for analog audio out, optical spdif,
# RTL R8188EU (USB) wifi and a full size sdcard slot
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN6I=y
CONFIG_DRAM_ZQ=120
CONFIG_USB1_VBUS_PIN="PC27"
CONFIG_USB2_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP221_DCDC1_VOLT=3300
CONFIG_AXP221_DLDO1_VOLT=3300
CONFIG_AXP221_DLDO4_VOLT=3300
CONFIG_AXP221_ALDO1_VOLT=3300