mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
1d6a0c9503
Following the recommendation of adding '#define DEBUG' at the top of drivers/core/lists.c does not cause the debug messages to be shown. Change it to '#define LOG_DEBUG' instead, which actually makes it work as per doc/README.log. While at it, provide the full path to lists.c to in order to make the instructions clearer. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
62 lines
2.6 KiB
ReStructuredText
62 lines
2.6 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
.. sectionauthor:: Simon Glass <sjg@chromium.org>
|
|
|
|
Debugging driver model
|
|
======================
|
|
|
|
This document aims to provide help when you cannot work out why driver model is
|
|
not doing what you expect.
|
|
|
|
|
|
Useful techniques in general
|
|
----------------------------
|
|
|
|
Here are some useful debugging features generally.
|
|
|
|
- If you are writing a new feature, consider doing it in sandbox instead of
|
|
on your board. Sandbox has no limits, allows easy debugging (e.g. gdb) and
|
|
you can write emulators for most common devices.
|
|
- Put '#define DEBUG' at the top of a file, to activate all the debug() and
|
|
log_debug() statements in that file.
|
|
- Where logging is used, change the logging level, e.g. in SPL with
|
|
CONFIG_SPL_LOG_MAX_LEVEL=7 (which is LOGL_DEBUG) and
|
|
CONFIG_LOG_DEFAULT_LEVEL=7
|
|
- Where logging of return values is implemented with log_msg_ret(), set
|
|
CONFIG_LOG_ERROR_RETURN=y to see exactly where the error is happening
|
|
- Make sure you have a debug UART enabled - see CONFIG_DEBUG_UART. With this
|
|
you can get serial output (printf(), etc.) before the serial driver is
|
|
running.
|
|
- Use a JTAG emulator to set breakpoints and single-step through code
|
|
|
|
Not that most of these increase code/data size somewhat when enabled.
|
|
|
|
|
|
Failure to locate a device
|
|
--------------------------
|
|
|
|
Let's say you have uclass_first_device_err() and it is not finding anything.
|
|
|
|
If it is returning an error, then that gives you a clue. Look up linux/errno.h
|
|
to see errors. Common ones are:
|
|
|
|
- -ENOMEM which indicates that memory is short. If it happens in SPL or
|
|
before relocation in U-Boot, check CONFIG_SPL_SYS_MALLOC_F_LEN and
|
|
CONFIG_SYS_MALLOC_F_LEN as they may need to be larger. Add '#define DEBUG'
|
|
at the very top of malloc_simple.c to get an idea of where your memory is
|
|
going.
|
|
- -EINVAL which typically indicates that something was missing or wrong in
|
|
the device tree node. Check that everything is correct and look at the
|
|
ofdata_to_platdata() method in the driver.
|
|
|
|
If there is no error, you should check if the device is actually bound. Call
|
|
dm_dump_all() just before you locate the device to make sure it exists.
|
|
|
|
If it does not exist, check your device tree compatible strings match up with
|
|
what the driver expects (in the struct udevice_id array).
|
|
|
|
If you are using of-platdata (e.g. CONFIG_SPL_OF_PLATDATA), check that the
|
|
driver name is the same as the first compatible string in the device tree (with
|
|
invalid-variable characters converted to underscore).
|
|
|
|
If you are really stuck, putting '#define LOG_DEBUG' at the top of
|
|
drivers/core/lists.c should show you what is going on.
|