mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 08:59:33 +00:00
d9e81b0dd7
As DM_ETH is required for all network drivers, it's now safe to remove the non-DM_ETH support code. Signed-off-by: Tom Rini <trini@konsulko.com>
671 lines
17 KiB
C
671 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2014 Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
|
|
* based on the U-Boot Asix driver as well as information
|
|
* from the Linux AX88179_178a driver
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <usb.h>
|
|
#include <net.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mii.h>
|
|
#include "usb_ether.h"
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <errno.h>
|
|
|
|
/* ASIX AX88179 based USB 3.0 Ethernet Devices */
|
|
#define AX88179_PHY_ID 0x03
|
|
#define AX_EEPROM_LEN 0x100
|
|
#define AX88179_EEPROM_MAGIC 0x17900b95
|
|
#define AX_MCAST_FLTSIZE 8
|
|
#define AX_MAX_MCAST 64
|
|
#define AX_INT_PPLS_LINK (1 << 16)
|
|
#define AX_RXHDR_L4_TYPE_MASK 0x1c
|
|
#define AX_RXHDR_L4_TYPE_UDP 4
|
|
#define AX_RXHDR_L4_TYPE_TCP 16
|
|
#define AX_RXHDR_L3CSUM_ERR 2
|
|
#define AX_RXHDR_L4CSUM_ERR 1
|
|
#define AX_RXHDR_CRC_ERR (1 << 29)
|
|
#define AX_RXHDR_DROP_ERR (1 << 31)
|
|
#define AX_ENDPOINT_INT 0x01
|
|
#define AX_ENDPOINT_IN 0x02
|
|
#define AX_ENDPOINT_OUT 0x03
|
|
#define AX_ACCESS_MAC 0x01
|
|
#define AX_ACCESS_PHY 0x02
|
|
#define AX_ACCESS_EEPROM 0x04
|
|
#define AX_ACCESS_EFUS 0x05
|
|
#define AX_PAUSE_WATERLVL_HIGH 0x54
|
|
#define AX_PAUSE_WATERLVL_LOW 0x55
|
|
|
|
#define PHYSICAL_LINK_STATUS 0x02
|
|
#define AX_USB_SS (1 << 2)
|
|
#define AX_USB_HS (1 << 1)
|
|
|
|
#define GENERAL_STATUS 0x03
|
|
#define AX_SECLD (1 << 2)
|
|
|
|
#define AX_SROM_ADDR 0x07
|
|
#define AX_SROM_CMD 0x0a
|
|
#define EEP_RD (1 << 2)
|
|
#define EEP_BUSY (1 << 4)
|
|
|
|
#define AX_SROM_DATA_LOW 0x08
|
|
#define AX_SROM_DATA_HIGH 0x09
|
|
|
|
#define AX_RX_CTL 0x0b
|
|
#define AX_RX_CTL_DROPCRCERR (1 << 8)
|
|
#define AX_RX_CTL_IPE (1 << 9)
|
|
#define AX_RX_CTL_START (1 << 7)
|
|
#define AX_RX_CTL_AP (1 << 5)
|
|
#define AX_RX_CTL_AM (1 << 4)
|
|
#define AX_RX_CTL_AB (1 << 3)
|
|
#define AX_RX_CTL_AMALL (1 << 1)
|
|
#define AX_RX_CTL_PRO (1 << 0)
|
|
#define AX_RX_CTL_STOP 0
|
|
|
|
#define AX_NODE_ID 0x10
|
|
#define AX_MULFLTARY 0x16
|
|
|
|
#define AX_MEDIUM_STATUS_MODE 0x22
|
|
#define AX_MEDIUM_GIGAMODE (1 << 0)
|
|
#define AX_MEDIUM_FULL_DUPLEX (1 << 1)
|
|
#define AX_MEDIUM_EN_125MHZ (1 << 3)
|
|
#define AX_MEDIUM_RXFLOW_CTRLEN (1 << 4)
|
|
#define AX_MEDIUM_TXFLOW_CTRLEN (1 << 5)
|
|
#define AX_MEDIUM_RECEIVE_EN (1 << 8)
|
|
#define AX_MEDIUM_PS (1 << 9)
|
|
#define AX_MEDIUM_JUMBO_EN 0x8040
|
|
|
|
#define AX_MONITOR_MOD 0x24
|
|
#define AX_MONITOR_MODE_RWLC (1 << 1)
|
|
#define AX_MONITOR_MODE_RWMP (1 << 2)
|
|
#define AX_MONITOR_MODE_PMEPOL (1 << 5)
|
|
#define AX_MONITOR_MODE_PMETYPE (1 << 6)
|
|
|
|
#define AX_GPIO_CTRL 0x25
|
|
#define AX_GPIO_CTRL_GPIO3EN (1 << 7)
|
|
#define AX_GPIO_CTRL_GPIO2EN (1 << 6)
|
|
#define AX_GPIO_CTRL_GPIO1EN (1 << 5)
|
|
|
|
#define AX_PHYPWR_RSTCTL 0x26
|
|
#define AX_PHYPWR_RSTCTL_BZ (1 << 4)
|
|
#define AX_PHYPWR_RSTCTL_IPRL (1 << 5)
|
|
#define AX_PHYPWR_RSTCTL_AT (1 << 12)
|
|
|
|
#define AX_RX_BULKIN_QCTRL 0x2e
|
|
#define AX_CLK_SELECT 0x33
|
|
#define AX_CLK_SELECT_BCS (1 << 0)
|
|
#define AX_CLK_SELECT_ACS (1 << 1)
|
|
#define AX_CLK_SELECT_ULR (1 << 3)
|
|
|
|
#define AX_RXCOE_CTL 0x34
|
|
#define AX_RXCOE_IP (1 << 0)
|
|
#define AX_RXCOE_TCP (1 << 1)
|
|
#define AX_RXCOE_UDP (1 << 2)
|
|
#define AX_RXCOE_TCPV6 (1 << 5)
|
|
#define AX_RXCOE_UDPV6 (1 << 6)
|
|
|
|
#define AX_TXCOE_CTL 0x35
|
|
#define AX_TXCOE_IP (1 << 0)
|
|
#define AX_TXCOE_TCP (1 << 1)
|
|
#define AX_TXCOE_UDP (1 << 2)
|
|
#define AX_TXCOE_TCPV6 (1 << 5)
|
|
#define AX_TXCOE_UDPV6 (1 << 6)
|
|
|
|
#define AX_LEDCTRL 0x73
|
|
|
|
#define GMII_PHY_PHYSR 0x11
|
|
#define GMII_PHY_PHYSR_SMASK 0xc000
|
|
#define GMII_PHY_PHYSR_GIGA (1 << 15)
|
|
#define GMII_PHY_PHYSR_100 (1 << 14)
|
|
#define GMII_PHY_PHYSR_FULL (1 << 13)
|
|
#define GMII_PHY_PHYSR_LINK (1 << 10)
|
|
|
|
#define GMII_LED_ACT 0x1a
|
|
#define GMII_LED_ACTIVE_MASK 0xff8f
|
|
#define GMII_LED0_ACTIVE (1 << 4)
|
|
#define GMII_LED1_ACTIVE (1 << 5)
|
|
#define GMII_LED2_ACTIVE (1 << 6)
|
|
|
|
#define GMII_LED_LINK 0x1c
|
|
#define GMII_LED_LINK_MASK 0xf888
|
|
#define GMII_LED0_LINK_10 (1 << 0)
|
|
#define GMII_LED0_LINK_100 (1 << 1)
|
|
#define GMII_LED0_LINK_1000 (1 << 2)
|
|
#define GMII_LED1_LINK_10 (1 << 4)
|
|
#define GMII_LED1_LINK_100 (1 << 5)
|
|
#define GMII_LED1_LINK_1000 (1 << 6)
|
|
#define GMII_LED2_LINK_10 (1 << 8)
|
|
#define GMII_LED2_LINK_100 (1 << 9)
|
|
#define GMII_LED2_LINK_1000 (1 << 10)
|
|
#define LED0_ACTIVE (1 << 0)
|
|
#define LED0_LINK_10 (1 << 1)
|
|
#define LED0_LINK_100 (1 << 2)
|
|
#define LED0_LINK_1000 (1 << 3)
|
|
#define LED0_FD (1 << 4)
|
|
#define LED0_USB3_MASK 0x001f
|
|
#define LED1_ACTIVE (1 << 5)
|
|
#define LED1_LINK_10 (1 << 6)
|
|
#define LED1_LINK_100 (1 << 7)
|
|
#define LED1_LINK_1000 (1 << 8)
|
|
#define LED1_FD (1 << 9)
|
|
#define LED1_USB3_MASK 0x03e0
|
|
#define LED2_ACTIVE (1 << 10)
|
|
#define LED2_LINK_1000 (1 << 13)
|
|
#define LED2_LINK_100 (1 << 12)
|
|
#define LED2_LINK_10 (1 << 11)
|
|
#define LED2_FD (1 << 14)
|
|
#define LED_VALID (1 << 15)
|
|
#define LED2_USB3_MASK 0x7c00
|
|
|
|
#define GMII_PHYPAGE 0x1e
|
|
#define GMII_PHY_PAGE_SELECT 0x1f
|
|
#define GMII_PHY_PGSEL_EXT 0x0007
|
|
#define GMII_PHY_PGSEL_PAGE0 0x0000
|
|
|
|
/* local defines */
|
|
#define ASIX_BASE_NAME "axg"
|
|
#define USB_CTRL_SET_TIMEOUT 5000
|
|
#define USB_CTRL_GET_TIMEOUT 5000
|
|
#define USB_BULK_SEND_TIMEOUT 5000
|
|
#define USB_BULK_RECV_TIMEOUT 5000
|
|
|
|
#define AX_RX_URB_SIZE 1024 * 0x12
|
|
#define BLK_FRAME_SIZE 0x200
|
|
#define PHY_CONNECT_TIMEOUT 5000
|
|
|
|
#define TIMEOUT_RESOLUTION 50 /* ms */
|
|
|
|
#define FLAG_NONE 0
|
|
#define FLAG_TYPE_AX88179 (1U << 0)
|
|
#define FLAG_TYPE_AX88178a (1U << 1)
|
|
#define FLAG_TYPE_DLINK_DUB1312 (1U << 2)
|
|
#define FLAG_TYPE_SITECOM (1U << 3)
|
|
#define FLAG_TYPE_SAMSUNG (1U << 4)
|
|
#define FLAG_TYPE_LENOVO (1U << 5)
|
|
#define FLAG_TYPE_GX3 (1U << 6)
|
|
|
|
/* local vars */
|
|
static const struct {
|
|
unsigned char ctrl, timer_l, timer_h, size, ifg;
|
|
} AX88179_BULKIN_SIZE[] = {
|
|
{7, 0x4f, 0, 0x02, 0xff},
|
|
{7, 0x20, 3, 0x03, 0xff},
|
|
{7, 0xae, 7, 0x04, 0xff},
|
|
{7, 0xcc, 0x4c, 0x04, 8},
|
|
};
|
|
|
|
/* driver private */
|
|
struct asix_private {
|
|
struct ueth_data ueth;
|
|
unsigned pkt_cnt;
|
|
uint8_t *pkt_data;
|
|
uint32_t *pkt_hdr;
|
|
int flags;
|
|
int rx_urb_size;
|
|
int maxpacketsize;
|
|
};
|
|
|
|
/*
|
|
* Asix infrastructure commands
|
|
*/
|
|
static int asix_write_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index,
|
|
u16 size, void *data)
|
|
{
|
|
int len;
|
|
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, size);
|
|
|
|
debug("asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
|
|
cmd, value, index, size);
|
|
|
|
memcpy(buf, data, size);
|
|
|
|
len = usb_control_msg(
|
|
dev->pusb_dev,
|
|
usb_sndctrlpipe(dev->pusb_dev, 0),
|
|
cmd,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
value,
|
|
index,
|
|
buf,
|
|
size,
|
|
USB_CTRL_SET_TIMEOUT);
|
|
|
|
return len == size ? 0 : ECOMM;
|
|
}
|
|
|
|
static int asix_read_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index,
|
|
u16 size, void *data)
|
|
{
|
|
int len;
|
|
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, size);
|
|
|
|
debug("asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
|
|
cmd, value, index, size);
|
|
|
|
len = usb_control_msg(
|
|
dev->pusb_dev,
|
|
usb_rcvctrlpipe(dev->pusb_dev, 0),
|
|
cmd,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
value,
|
|
index,
|
|
buf,
|
|
size,
|
|
USB_CTRL_GET_TIMEOUT);
|
|
|
|
memcpy(data, buf, size);
|
|
|
|
return len == size ? 0 : ECOMM;
|
|
}
|
|
|
|
static int asix_read_mac(struct ueth_data *dev, uint8_t *enetaddr)
|
|
{
|
|
int ret;
|
|
|
|
ret = asix_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, 6, 6, enetaddr);
|
|
if (ret < 0)
|
|
debug("Failed to read MAC address: %02x\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int asix_write_mac(struct ueth_data *dev, uint8_t *enetaddr)
|
|
{
|
|
int ret;
|
|
|
|
ret = asix_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
|
|
ETH_ALEN, enetaddr);
|
|
if (ret < 0)
|
|
debug("Failed to set MAC address: %02x\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int asix_basic_reset(struct ueth_data *dev,
|
|
struct asix_private *dev_priv)
|
|
{
|
|
u8 buf[5];
|
|
u16 *tmp16;
|
|
u8 *tmp;
|
|
|
|
tmp16 = (u16 *)buf;
|
|
tmp = (u8 *)buf;
|
|
|
|
/* Power up ethernet PHY */
|
|
*tmp16 = 0;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
|
|
|
|
*tmp16 = AX_PHYPWR_RSTCTL_IPRL;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
|
|
mdelay(200);
|
|
|
|
*tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
|
|
mdelay(200);
|
|
|
|
/* RX bulk configuration */
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
|
|
|
|
dev_priv->rx_urb_size = 128 * 20;
|
|
|
|
/* Water Level configuration */
|
|
*tmp = 0x34;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
|
|
|
|
*tmp = 0x52;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH, 1, 1, tmp);
|
|
|
|
/* Enable checksum offload */
|
|
*tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
|
|
AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
|
|
|
|
*tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
|
|
AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
|
|
|
|
/* Configure RX control register => start operation */
|
|
*tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
|
|
AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
|
|
|
|
*tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
|
|
AX_MONITOR_MODE_RWMP;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
|
|
|
|
/* Configure default medium type => giga */
|
|
*tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
|
|
AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
|
|
AX_MEDIUM_GIGAMODE | AX_MEDIUM_JUMBO_EN;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE, 2, 2, tmp16);
|
|
|
|
u16 adv = 0;
|
|
adv = ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_LPACK |
|
|
ADVERTISE_NPAGE | ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP;
|
|
asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_ADVERTISE, 2, &adv);
|
|
|
|
adv = ADVERTISE_1000FULL;
|
|
asix_write_cmd(dev, AX_ACCESS_PHY, 0x03, MII_CTRL1000, 2, &adv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int asix_wait_link(struct ueth_data *dev)
|
|
{
|
|
int timeout = 0;
|
|
int link_detected;
|
|
u8 buf[2];
|
|
u16 *tmp16;
|
|
|
|
tmp16 = (u16 *)buf;
|
|
|
|
do {
|
|
asix_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
|
|
MII_BMSR, 2, buf);
|
|
link_detected = *tmp16 & BMSR_LSTATUS;
|
|
if (!link_detected) {
|
|
if (timeout == 0)
|
|
printf("Waiting for Ethernet connection... ");
|
|
mdelay(TIMEOUT_RESOLUTION);
|
|
timeout += TIMEOUT_RESOLUTION;
|
|
}
|
|
} while (!link_detected && timeout < PHY_CONNECT_TIMEOUT);
|
|
|
|
if (link_detected) {
|
|
if (timeout > 0)
|
|
printf("done.\n");
|
|
return 0;
|
|
} else {
|
|
printf("unable to connect.\n");
|
|
return -ENETUNREACH;
|
|
}
|
|
}
|
|
|
|
static int asix_init_common(struct ueth_data *dev,
|
|
struct asix_private *dev_priv)
|
|
{
|
|
u8 buf[2], tmp[5], link_sts;
|
|
u16 *tmp16, mode;
|
|
|
|
|
|
tmp16 = (u16 *)buf;
|
|
|
|
debug("** %s()\n", __func__);
|
|
|
|
/* Configure RX control register => start operation */
|
|
*tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
|
|
AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
|
|
if (asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16) != 0)
|
|
goto out_err;
|
|
|
|
if (asix_wait_link(dev) != 0) {
|
|
/*reset device and try again*/
|
|
printf("Reset Ethernet Device\n");
|
|
asix_basic_reset(dev, dev_priv);
|
|
if (asix_wait_link(dev) != 0)
|
|
goto out_err;
|
|
}
|
|
|
|
/* Configure link */
|
|
mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
|
|
AX_MEDIUM_RXFLOW_CTRLEN;
|
|
|
|
asix_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS,
|
|
1, 1, &link_sts);
|
|
|
|
asix_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
|
|
GMII_PHY_PHYSR, 2, tmp16);
|
|
|
|
if (!(*tmp16 & GMII_PHY_PHYSR_LINK)) {
|
|
return 0;
|
|
} else if (GMII_PHY_PHYSR_GIGA == (*tmp16 & GMII_PHY_PHYSR_SMASK)) {
|
|
mode |= AX_MEDIUM_GIGAMODE | AX_MEDIUM_EN_125MHZ |
|
|
AX_MEDIUM_JUMBO_EN;
|
|
|
|
if (link_sts & AX_USB_SS)
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
|
|
else if (link_sts & AX_USB_HS)
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[1], 5);
|
|
else
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
|
|
} else if (GMII_PHY_PHYSR_100 == (*tmp16 & GMII_PHY_PHYSR_SMASK)) {
|
|
mode |= AX_MEDIUM_PS;
|
|
|
|
if (link_sts & (AX_USB_SS | AX_USB_HS))
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[2], 5);
|
|
else
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
|
|
} else {
|
|
memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
|
|
}
|
|
|
|
/* RX bulk configuration */
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
|
|
|
|
dev_priv->rx_urb_size = (1024 * (tmp[3] + 2));
|
|
if (*tmp16 & GMII_PHY_PHYSR_FULL)
|
|
mode |= AX_MEDIUM_FULL_DUPLEX;
|
|
asix_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
|
|
2, 2, &mode);
|
|
|
|
return 0;
|
|
out_err:
|
|
return -1;
|
|
}
|
|
|
|
static int asix_send_common(struct ueth_data *dev,
|
|
struct asix_private *dev_priv,
|
|
void *packet, int length)
|
|
{
|
|
int err;
|
|
u32 packet_len, tx_hdr2;
|
|
int actual_len, framesize;
|
|
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg,
|
|
PKTSIZE + (2 * sizeof(packet_len)));
|
|
|
|
debug("** %s(), len %d\n", __func__, length);
|
|
|
|
packet_len = length;
|
|
cpu_to_le32s(&packet_len);
|
|
|
|
memcpy(msg, &packet_len, sizeof(packet_len));
|
|
framesize = dev_priv->maxpacketsize;
|
|
tx_hdr2 = 0;
|
|
if (((length + 8) % framesize) == 0)
|
|
tx_hdr2 |= 0x80008000; /* Enable padding */
|
|
|
|
cpu_to_le32s(&tx_hdr2);
|
|
|
|
memcpy(msg + sizeof(packet_len), &tx_hdr2, sizeof(tx_hdr2));
|
|
|
|
memcpy(msg + sizeof(packet_len) + sizeof(tx_hdr2),
|
|
(void *)packet, length);
|
|
|
|
err = usb_bulk_msg(dev->pusb_dev,
|
|
usb_sndbulkpipe(dev->pusb_dev, dev->ep_out),
|
|
(void *)msg,
|
|
length + sizeof(packet_len) + sizeof(tx_hdr2),
|
|
&actual_len,
|
|
USB_BULK_SEND_TIMEOUT);
|
|
debug("Tx: len = %zu, actual = %u, err = %d\n",
|
|
length + sizeof(packet_len), actual_len, err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ax88179_eth_start(struct udevice *dev)
|
|
{
|
|
struct asix_private *priv = dev_get_priv(dev);
|
|
|
|
return asix_init_common(&priv->ueth, priv);
|
|
}
|
|
|
|
void ax88179_eth_stop(struct udevice *dev)
|
|
{
|
|
struct asix_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
|
|
debug("** %s()\n", __func__);
|
|
|
|
usb_ether_advance_rxbuf(ueth, -1);
|
|
priv->pkt_cnt = 0;
|
|
priv->pkt_data = NULL;
|
|
priv->pkt_hdr = NULL;
|
|
}
|
|
|
|
int ax88179_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct asix_private *priv = dev_get_priv(dev);
|
|
|
|
return asix_send_common(&priv->ueth, priv, packet, length);
|
|
}
|
|
|
|
int ax88179_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct asix_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
int ret, len;
|
|
u16 pkt_len;
|
|
|
|
/* No packet left, get a new one */
|
|
if (priv->pkt_cnt == 0) {
|
|
uint8_t *ptr;
|
|
u16 pkt_cnt;
|
|
u16 hdr_off;
|
|
u32 rx_hdr;
|
|
|
|
len = usb_ether_get_rx_bytes(ueth, &ptr);
|
|
debug("%s: first try, len=%d\n", __func__, len);
|
|
if (!len) {
|
|
if (!(flags & ETH_RECV_CHECK_DEVICE))
|
|
return -EAGAIN;
|
|
|
|
ret = usb_ether_receive(ueth, priv->rx_urb_size);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
len = usb_ether_get_rx_bytes(ueth, &ptr);
|
|
debug("%s: second try, len=%d\n", __func__, len);
|
|
}
|
|
|
|
if (len < 4) {
|
|
usb_ether_advance_rxbuf(ueth, -1);
|
|
return -EMSGSIZE;
|
|
}
|
|
|
|
rx_hdr = *(u32 *)(ptr + len - 4);
|
|
le32_to_cpus(&rx_hdr);
|
|
|
|
pkt_cnt = (u16)rx_hdr;
|
|
if (pkt_cnt == 0) {
|
|
usb_ether_advance_rxbuf(ueth, -1);
|
|
return 0;
|
|
}
|
|
|
|
hdr_off = (u16)(rx_hdr >> 16);
|
|
if (hdr_off > len - 4) {
|
|
usb_ether_advance_rxbuf(ueth, -1);
|
|
return -EIO;
|
|
}
|
|
|
|
priv->pkt_cnt = pkt_cnt;
|
|
priv->pkt_data = ptr;
|
|
priv->pkt_hdr = (u32 *)(ptr + hdr_off);
|
|
debug("%s: %d packets received, pkt header at %d\n",
|
|
__func__, (int)priv->pkt_cnt, (int)hdr_off);
|
|
}
|
|
|
|
le32_to_cpus(priv->pkt_hdr);
|
|
pkt_len = (*priv->pkt_hdr >> 16) & 0x1fff;
|
|
|
|
*packetp = priv->pkt_data + 2;
|
|
|
|
priv->pkt_data += (pkt_len + 7) & 0xFFF8;
|
|
priv->pkt_cnt--;
|
|
priv->pkt_hdr++;
|
|
|
|
debug("%s: return packet of %d bytes (%d packets left)\n",
|
|
__func__, (int)pkt_len, priv->pkt_cnt);
|
|
return pkt_len;
|
|
}
|
|
|
|
static int ax88179_free_pkt(struct udevice *dev, uchar *packet, int packet_len)
|
|
{
|
|
struct asix_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
|
|
if (priv->pkt_cnt == 0)
|
|
usb_ether_advance_rxbuf(ueth, -1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ax88179_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct asix_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
|
|
return asix_write_mac(ueth, pdata->enetaddr);
|
|
}
|
|
|
|
static int ax88179_eth_probe(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct asix_private *priv = dev_get_priv(dev);
|
|
struct usb_device *usb_dev;
|
|
int ret;
|
|
|
|
priv->flags = dev->driver_data;
|
|
ret = usb_ether_register(dev, &priv->ueth, AX_RX_URB_SIZE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
usb_dev = priv->ueth.pusb_dev;
|
|
priv->maxpacketsize = usb_dev->epmaxpacketout[AX_ENDPOINT_OUT];
|
|
|
|
/* Get the MAC address */
|
|
ret = asix_read_mac(&priv->ueth, pdata->enetaddr);
|
|
if (ret)
|
|
return ret;
|
|
debug("MAC %pM\n", pdata->enetaddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops ax88179_eth_ops = {
|
|
.start = ax88179_eth_start,
|
|
.send = ax88179_eth_send,
|
|
.recv = ax88179_eth_recv,
|
|
.free_pkt = ax88179_free_pkt,
|
|
.stop = ax88179_eth_stop,
|
|
.write_hwaddr = ax88179_write_hwaddr,
|
|
};
|
|
|
|
U_BOOT_DRIVER(ax88179_eth) = {
|
|
.name = "ax88179_eth",
|
|
.id = UCLASS_ETH,
|
|
.probe = ax88179_eth_probe,
|
|
.ops = &ax88179_eth_ops,
|
|
.priv_auto = sizeof(struct asix_private),
|
|
.plat_auto = sizeof(struct eth_pdata),
|
|
};
|
|
|
|
static const struct usb_device_id ax88179_eth_id_table[] = {
|
|
{ USB_DEVICE(0x0b95, 0x1790), .driver_info = FLAG_TYPE_AX88179 },
|
|
{ USB_DEVICE(0x0b95, 0x178a), .driver_info = FLAG_TYPE_AX88178a },
|
|
{ USB_DEVICE(0x2001, 0x4a00), .driver_info = FLAG_TYPE_DLINK_DUB1312 },
|
|
{ USB_DEVICE(0x0df6, 0x0072), .driver_info = FLAG_TYPE_SITECOM },
|
|
{ USB_DEVICE(0x04e8, 0xa100), .driver_info = FLAG_TYPE_SAMSUNG },
|
|
{ USB_DEVICE(0x17ef, 0x304b), .driver_info = FLAG_TYPE_LENOVO },
|
|
{ USB_DEVICE(0x04b4, 0x3610), .driver_info = FLAG_TYPE_GX3 },
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
U_BOOT_USB_DEVICE(ax88179_eth, ax88179_eth_id_table);
|