mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 10:30:32 +00:00
d3d82e9fc6
Commit "8602114 omap: emif: configure emif only when required" breaks SDRAM_AUTO_DETECTION. The issue is dmm_init() depends on emif_sizes[](SDRAM Auto detection) done in do_sdram_init(). The above commit moves dmm_init() above do_sdram_init() because of which dmm_init() uses uninitialized emif_sizes[]. So instead of using global emif_sizes[], get sdram details locally and calculate emif sizes. Reported-by: Michael Cashwell <mboards@prograde.net> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
104 lines
2.8 KiB
C
104 lines
2.8 KiB
C
/*
|
|
* EMIF programming
|
|
*
|
|
* (C) Copyright 2010
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Aneesh V <aneesh@ti.com> for OMAP4
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/utils.h>
|
|
|
|
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
|
|
#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
|
|
static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM;
|
|
static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
|
|
/* Base AC Timing values specified by JESD209-2 for 532MHz operation */
|
|
static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
|
|
.max_freq = 532000000,
|
|
.RL = 8,
|
|
.tRPab = 21,
|
|
.tRCD = 18,
|
|
.tWR = 15,
|
|
.tRASmin = 42,
|
|
.tRRD = 10,
|
|
.tWTRx2 = 15,
|
|
.tXSR = 140,
|
|
.tXPx2 = 15,
|
|
.tRFCab = 130,
|
|
.tRTPx2 = 15,
|
|
.tCKE = 3,
|
|
.tCKESR = 15,
|
|
.tZQCS = 90,
|
|
.tZQCL = 360,
|
|
.tZQINIT = 1000,
|
|
.tDQSCKMAXx2 = 11,
|
|
.tRASmax = 70,
|
|
.tFAW = 50
|
|
};
|
|
|
|
/*
|
|
* Min tCK values specified by JESD209-2
|
|
* Min tCK specifies the minimum duration of some AC timing parameters in terms
|
|
* of the number of cycles. If the calculated number of cycles based on the
|
|
* absolute time value is less than the min tCK value, min tCK value should
|
|
* be used instead. This typically happens at low frequencies.
|
|
*/
|
|
static const struct lpddr2_min_tck min_tck_jedec = {
|
|
.tRL = 3,
|
|
.tRP_AB = 3,
|
|
.tRCD = 3,
|
|
.tWR = 3,
|
|
.tRAS_MIN = 3,
|
|
.tRRD = 2,
|
|
.tWTR = 2,
|
|
.tXP = 2,
|
|
.tRTP = 2,
|
|
.tCKE = 3,
|
|
.tCKESR = 3,
|
|
.tFAW = 8
|
|
};
|
|
|
|
static const struct lpddr2_ac_timings const*
|
|
jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
|
|
&timings_jedec_532_mhz
|
|
};
|
|
|
|
static const struct lpddr2_device_timings jedec_default_timings = {
|
|
.ac_timings = jedec_ac_timings,
|
|
.min_tck = &min_tck_jedec
|
|
};
|
|
|
|
void emif_get_device_timings(u32 emif_nr,
|
|
const struct lpddr2_device_timings **cs0_device_timings,
|
|
const struct lpddr2_device_timings **cs1_device_timings)
|
|
{
|
|
/* Assume Identical devices on EMIF1 & EMIF2 */
|
|
*cs0_device_timings = &jedec_default_timings;
|
|
*cs1_device_timings = NULL;
|
|
}
|
|
#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
|