mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
3e6ab7327f
The mode selection for the DWC3 is kind of obsolete. The driver does not have to be host only or gadget only. This choice is confusing. All the remaining callers of dwc3_uboot_init() explicitly set dr_mode before calling the function, so none rely on a default behavior. Remove the choice menu and keep only the USB_DWC3_GADGET option. Enable it by default if USB_GADGET and USB_DWC3 are enabled. It must be disabled for the evb-rk3328 as it uses DWC2 for the gadget and DWC3 for the host. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
100 lines
2.5 KiB
Text
100 lines
2.5 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_ROCKCHIP=y
|
|
CONFIG_SYS_TEXT_BASE=0x00200000
|
|
CONFIG_ROCKCHIP_RK3328=y
|
|
CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
|
|
CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x40000
|
|
CONFIG_TPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_TPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_SPL_STACK_R_ADDR=0x600000
|
|
CONFIG_DEBUG_UART_BASE=0xFF130000
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
|
|
# CONFIG_ANDROID_BOOT_IMAGE is not set
|
|
CONFIG_FIT=y
|
|
CONFIG_FIT_VERBOSE=y
|
|
CONFIG_SPL_LOAD_FIT=y
|
|
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
|
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
|
|
CONFIG_SPL_STACK_R=y
|
|
CONFIG_SPL_ATF=y
|
|
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
|
|
CONFIG_CMD_BOOTZ=y
|
|
CONFIG_CMD_GPT=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_SF=y
|
|
CONFIG_CMD_USB=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_TPL_OF_CONTROL=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
|
|
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
|
CONFIG_TPL_OF_PLATDATA=y
|
|
CONFIG_ENV_IS_IN_MMC=y
|
|
CONFIG_NET_RANDOM_ETHADDR=y
|
|
CONFIG_TPL_DM=y
|
|
CONFIG_REGMAP=y
|
|
CONFIG_SPL_REGMAP=y
|
|
CONFIG_TPL_REGMAP=y
|
|
CONFIG_SYSCON=y
|
|
CONFIG_SPL_SYSCON=y
|
|
CONFIG_TPL_SYSCON=y
|
|
CONFIG_CLK=y
|
|
CONFIG_SPL_CLK=y
|
|
CONFIG_TPL_CLK=y
|
|
CONFIG_FASTBOOT_BUF_ADDR=0x800800
|
|
CONFIG_FASTBOOT_FLASH=y
|
|
CONFIG_FASTBOOT_FLASH_MMC_DEV=1
|
|
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
|
CONFIG_ROCKCHIP_GPIO=y
|
|
CONFIG_SYS_I2C_ROCKCHIP=y
|
|
CONFIG_MMC_DW=y
|
|
CONFIG_MMC_DW_ROCKCHIP=y
|
|
CONFIG_SPI_FLASH=y
|
|
CONFIG_SF_DEFAULT_SPEED=20000000
|
|
CONFIG_DM_ETH=y
|
|
CONFIG_ETH_DESIGNWARE=y
|
|
CONFIG_GMAC_ROCKCHIP=y
|
|
CONFIG_PHY=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_SPL_PINCTRL=y
|
|
CONFIG_DM_PMIC=y
|
|
CONFIG_PMIC_RK8XX=y
|
|
CONFIG_REGULATOR_PWM=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_REGULATOR_RK8XX=y
|
|
CONFIG_PWM_ROCKCHIP=y
|
|
CONFIG_RAM=y
|
|
CONFIG_SPL_RAM=y
|
|
CONFIG_TPL_RAM=y
|
|
CONFIG_DM_RESET=y
|
|
CONFIG_BAUDRATE=1500000
|
|
CONFIG_DEBUG_UART_SHIFT=2
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_XHCI_DWC3=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_EHCI_GENERIC=y
|
|
CONFIG_USB_OHCI_HCD=y
|
|
CONFIG_USB_OHCI_GENERIC=y
|
|
CONFIG_USB_DWC2=y
|
|
CONFIG_USB_DWC3=y
|
|
# CONFIG_USB_DWC3_GADGET is not set
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x2207
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
|
|
CONFIG_USB_GADGET_DWC2_OTG=y
|
|
CONFIG_SPL_TINY_MEMSET=y
|
|
CONFIG_TPL_TINY_MEMSET=y
|
|
CONFIG_ERRNO_STR=y
|
|
CONFIG_SMBIOS_MANUFACTURER="pine64"
|