mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
2b58e1b76d
The meaning of CONFIG_USB in U-Boot is different from that in Linux. As you see in drivers/usb/Kconfig of Linux, CONFIG_USB enables the USB host controller support, while CONFIG_USB_SUPPORT is used to enable the whole of the USB sub-system. When I added CONFIG_USB into Kconfig by commit6e7e9294d3("usb: add basic USB configs in Kconfig"), I planned to follow the Linux's convention, i.e. CONFIG_USB to enable/disable the USB host support. Then, commit68f7c5db2d("usb: Generic USB Kconfig option, that fits both host and gadget and comments") changed the logic of the CONFIG_USB to point to the whole of the USB sub-system. As a result, currently we do not have an option for USB host. This commit adds CONFIG_USB_HOST, which will be useful to compile in the USB host support code. CONFIG_USB_HOST is not referenced at all, but strangely some boards define it in board headers. I removed them because USB_HOST will be selected in Kconfig going forward. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
180 lines
5 KiB
C
180 lines
5 KiB
C
/*
|
|
* cm_t43.h
|
|
*
|
|
* Copyright (C) 2015 Compulab, Ltd.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_CM_T43_H
|
|
#define __CONFIG_CM_T43_H
|
|
|
|
#define CONFIG_AM43XX
|
|
#define CONFIG_CM_T43
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2GB */
|
|
#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
|
|
|
|
#include <asm/arch/omap.h>
|
|
|
|
/* Serial support */
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_CLK 48000000
|
|
#define CONFIG_SYS_NS16550_COM1 0x44e09000
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#endif
|
|
|
|
/* NAND support */
|
|
#define CONFIG_NAND
|
|
#define CONFIG_NAND_OMAP_ELM
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 14
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
|
|
10, 11, 12, 13, 14, 15, 16, 17, \
|
|
18, 19, 20, 21, 22, 23, 24, 25, \
|
|
26, 27, 28, 29, 30, 31, 32, 33, \
|
|
34, 35, 36, 37, 38, 39, 40, 41, \
|
|
42, 43, 44, 45, 46, 47, 48, 49, \
|
|
50, 51, 52, 53, 54, 55, 56, 57, }
|
|
|
|
/* CPSW Ethernet support */
|
|
#define CONFIG_DRIVER_TI_CPSW
|
|
#define CONFIG_MII
|
|
#define CONFIG_BOOTP_DEFAULT
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_PHY_GIGE
|
|
#define CONFIG_PHY_ATHEROS
|
|
#define CONFIG_PHYLIB
|
|
#define CONFIG_SYS_RX_ETH_BUFFER 64
|
|
|
|
/* USB support */
|
|
#define CONFIG_USB_XHCI_OMAP
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
|
|
#define CONFIG_OMAP_USB_PHY
|
|
#define CONFIG_AM437X_USB2PHY2_HOST
|
|
|
|
/* SPI Flash support */
|
|
#define CONFIG_TI_SPI_MMAP
|
|
#define CONFIG_SF_DEFAULT_SPEED 48000000
|
|
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
|
|
|
|
/* Power */
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_I2C
|
|
#define CONFIG_POWER_TPS65218
|
|
|
|
/* Enabling L2 Cache */
|
|
#define CONFIG_SYS_L2_PL310
|
|
#define CONFIG_SYS_PL310_BASE 0x48242000
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
|
|
/*
|
|
* Since SPL did pll and ddr initialization for us,
|
|
* we don't need to do it twice.
|
|
*/
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#endif
|
|
|
|
#define CONFIG_HSMMC2_8BIT
|
|
|
|
#include <configs/ti_armv7_omap.h>
|
|
#undef CONFIG_SPL_OS_BOOT
|
|
#undef CONFIG_SPL_GPIO_SUPPORT
|
|
#undef CONFIG_SPL_NAND_SUPPORT
|
|
#undef CONFIG_SYS_MONITOR_LEN
|
|
#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
|
|
|
|
#define CONFIG_ENV_SIZE (16 * 1024)
|
|
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
|
|
#define V_OSCK 24000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK)
|
|
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
|
#define CONFIG_ENV_OFFSET (768 * 1024)
|
|
#define CONFIG_ENV_SPI_MAX_HZ 48000000
|
|
|
|
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
|
|
|
|
/* Enhance our eMMC support / experience. */
|
|
#define CONFIG_CMD_GPT
|
|
#define CONFIG_EFI_PARTITION
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"loadaddr=0x80200000\0" \
|
|
"fdtaddr=0x81200000\0" \
|
|
"bootm_size=0x8000000\0" \
|
|
"autoload=no\0" \
|
|
"console=ttyO0,115200n8\0" \
|
|
"fdtfile=am437x-sb-som-t43.dtb\0" \
|
|
"kernel=zImage-cm-t43\0" \
|
|
"bootscr=bootscr.img\0" \
|
|
"emmcroot=/dev/mmcblk0p2 rw\0" \
|
|
"emmcrootfstype=ext4 rootwait\0" \
|
|
"emmcargs=setenv bootargs console=${console} " \
|
|
"root=${emmcroot} " \
|
|
"rootfstype=${emmcrootfstype}\0" \
|
|
"loadbootscript=load mmc 0 ${loadaddr} ${bootscr}\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source ${loadaddr}\0" \
|
|
"emmcboot=echo Booting from emmc ... && " \
|
|
"run emmcargs && " \
|
|
"load mmc 1 ${loadaddr} ${kernel} && " \
|
|
"load mmc 1 ${fdtaddr} ${fdtfile} && " \
|
|
"bootz ${loadaddr} - ${fdtaddr}\0"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc dev 0; " \
|
|
"if mmc rescan; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"mmc dev 1; " \
|
|
"if mmc rescan; then " \
|
|
"run emmcboot; " \
|
|
"fi;"
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
/* SPL defines. */
|
|
#define CONFIG_SPL_TEXT_BASE 0x40300350
|
|
#define CONFIG_SPL_MAX_SIZE (64 * 1024)
|
|
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20))
|
|
#define CONFIG_SPL_POWER_SUPPORT
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x480
|
|
#define CONFIG_SPL_SPI_SUPPORT
|
|
#define CONFIG_SPL_SPI_FLASH_SUPPORT
|
|
#define CONFIG_SPL_SPI_LOAD
|
|
#define CONFIG_SPL_I2C_SUPPORT
|
|
#define CONFIG_SPL_POWER_SUPPORT
|
|
|
|
/* EEPROM */
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_ENV_EEPROM_IS_ON_I2C
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
|
|
#define CONFIG_SYS_EEPROM_SIZE 256
|
|
|
|
#define CONFIG_CMD_EEPROM_LAYOUT
|
|
#define CONFIG_EEPROM_LAYOUT_HELP_STRING "v2, v3"
|
|
|
|
#endif /* __CONFIG_CM_T43_H */
|