u-boot/test/py/tests/test_pinmux.py
Patrick Delaunay 4c60fd993a cmd: pinmux: update result of do_status
Update the result of do_status and always returns a CMD_RET_ value
(-ENOSYS was a possible result of show_pinmux).

This patch also adds pincontrol name in error messages (dev->name)
and treats correctly the status sub command when pin-controller device is
not selected.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-23 07:13:25 -04:00

84 lines
3.4 KiB
Python

# SPDX-License-Identifier: GPL-2.0
import pytest
import u_boot_utils
@pytest.mark.buildconfigspec('cmd_pinmux')
def test_pinmux_usage_1(u_boot_console):
"""Test that 'pinmux' command without parameters displays
pinmux usage."""
output = u_boot_console.run_command('pinmux')
assert 'Usage:' in output
@pytest.mark.buildconfigspec('cmd_pinmux')
def test_pinmux_usage_2(u_boot_console):
"""Test that 'pinmux status' executed without previous "pinmux dev"
command displays error message."""
output = u_boot_console.run_command('pinmux status')
assert 'pin-controller device not selected' in output
@pytest.mark.buildconfigspec('cmd_pinmux')
@pytest.mark.boardspec('sandbox')
def test_pinmux_status_all(u_boot_console):
"""Test that 'pinmux status -a' displays pin's muxing."""
output = u_boot_console.run_command('pinmux status -a')
assert ('pinctrl-gpio:' in output)
assert ('a5 : gpio output .' in output)
assert ('a6 : gpio output .' in output)
assert ('pinctrl:' in output)
assert ('P0 : UART TX.' in output)
assert ('P1 : UART RX.' in output)
assert ('P2 : I2S SCK.' in output)
assert ('P3 : I2S SD.' in output)
assert ('P4 : I2S WS.' in output)
assert ('P5 : GPIO0 bias-pull-up input-disable.' in output)
assert ('P6 : GPIO1 drive-open-drain.' in output)
assert ('P7 : GPIO2 bias-pull-down input-enable.' in output)
assert ('P8 : GPIO3 bias-disable.' in output)
@pytest.mark.buildconfigspec('cmd_pinmux')
@pytest.mark.boardspec('sandbox')
def test_pinmux_list(u_boot_console):
"""Test that 'pinmux list' returns the pin-controller list."""
output = u_boot_console.run_command('pinmux list')
assert 'sandbox_pinctrl' in output
@pytest.mark.buildconfigspec('cmd_pinmux')
def test_pinmux_dev_bad(u_boot_console):
"""Test that 'pinmux dev' returns an error when trying to select a
wrong pin controller."""
pincontroller = 'bad_pin_controller_name'
output = u_boot_console.run_command('pinmux dev ' + pincontroller)
expected_output = 'Can\'t get the pin-controller: ' + pincontroller + '!'
assert (expected_output in output)
@pytest.mark.buildconfigspec('cmd_pinmux')
@pytest.mark.boardspec('sandbox')
def test_pinmux_dev(u_boot_console):
"""Test that 'pinmux dev' select the wanted pin controller."""
pincontroller = 'pinctrl'
output = u_boot_console.run_command('pinmux dev ' + pincontroller)
expected_output = 'dev: ' + pincontroller
assert (expected_output in output)
@pytest.mark.buildconfigspec('cmd_pinmux')
@pytest.mark.boardspec('sandbox')
def test_pinmux_status(u_boot_console):
"""Test that 'pinmux status' displays selected pincontroller's pin
muxing descriptions."""
output = u_boot_console.run_command('pinmux status')
assert (not 'pinctrl-gpio:' in output)
assert (not 'pinctrl:' in output)
assert ('P0 : UART TX.' in output)
assert ('P1 : UART RX.' in output)
assert ('P2 : I2S SCK.' in output)
assert ('P3 : I2S SD.' in output)
assert ('P4 : I2S WS.' in output)
assert ('P5 : GPIO0 bias-pull-up input-disable.' in output)
assert ('P6 : GPIO1 drive-open-drain.' in output)
assert ('P7 : GPIO2 bias-pull-down input-enable.' in output)
assert ('P8 : GPIO3 bias-disable.' in output)