u-boot/arch/arm/dts/zynq-cse-nand.dts
T Karthik Reddy e86dce1c0c ARM: zynq: Add nand controller node in zynq-ces-nand dt
Add memory-controller@e000e000 node in zynq-ces-nand.dts as
zynq_nand driver utilizes flash@e1000000 node. Without this
dt node mini nand u-boot does not probe.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-27 14:21:18 +02:00

94 lines
1.9 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Xilinx CSE NAND board DTS
*
* Copyright (C) 2018 Xilinx, Inc.
*/
/dts-v1/;
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "Zynq CSE NAND Board";
compatible = "xlnx,zynq-cse-nand", "xlnx,zynq-7000";
aliases {
serial0 = &dcc;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x400000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
dcc: dcc {
compatible = "arm,dcc";
status = "disabled";
u-boot,dm-pre-reloc;
};
amba: amba {
u-boot,dm-pre-reloc;
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
smcc: memory-controller@e000e000 {
#address-cells = <1>;
#size-cells = <1>;
clock-names = "memclk", "apb_pclk";
clocks = <&clkc 11>, <&clkc 44>;
compatible = "arm,pl353-smc-r2p1", "arm,primecell";
ranges;
reg = <0xe000e000 0x1000>;
nand0: flash@e1000000 {
compatible = "arm,pl353-nand-r2p1";
reg = <0xe1000000 0x1000000>;
};
};
slcr: slcr@f8000000 {
u-boot,dm-pre-reloc;
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
reg = <0xF8000000 0x1000>;
ranges;
clkc: clkc@100 {
u-boot,dm-pre-reloc;
#clock-cells = <1>;
compatible = "xlnx,ps7-clkc";
clock-output-names = "armpll", "ddrpll",
"iopll", "cpu_6or4x",
"cpu_3or2x", "cpu_2x", "cpu_1x",
"ddr2x", "ddr3x", "dci",
"lqspi", "smc", "pcap", "gem0",
"gem1", "fclk0", "fclk1",
"fclk2", "fclk3", "can0",
"can1", "sdio0", "sdio1",
"uart0", "uart1", "spi0",
"spi1", "dma", "usb0_aper",
"usb1_aper", "gem0_aper",
"gem1_aper", "sdio0_aper",
"sdio1_aper", "spi0_aper",
"spi1_aper", "can0_aper",
"can1_aper", "i2c0_aper",
"i2c1_aper", "uart0_aper",
"uart1_aper", "gpio_aper",
"lqspi_aper", "smc_aper",
"swdt", "dbg_trc", "dbg_apb";
reg = <0x100 0x100>;
};
};
};
};
&dcc {
status = "okay";
};