mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
d4ad111dc4
Ls1028a SoC is based on Layerscape Chassis Generation 3.2 architecture with features: 2 ARM v8 Cortex-A72 cores, CCI400, SEC, DDR3L/4, LCD, GPU, TSN ENETC, 2 USB 3.0, 2 eSDHC, 2 FlexCAN, 2 SPI, SATA, 8 I2C controllers, 6 LPUARTs, GPIO, SAI, qDMA, eDMA, GIC, TMU etc. Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com> Signed-off-by: Rai Harninder <harninder.rai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
381 lines
15 KiB
Text
381 lines
15 KiB
Text
SoC overview
|
|
|
|
1. LS1043A
|
|
2. LS1088A
|
|
3. LS2080A
|
|
4. LS1012A
|
|
5. LS1046A
|
|
6. LS2088A
|
|
7. LS2081A
|
|
8. LX2160A
|
|
9. LS1028A
|
|
|
|
LS1043A
|
|
---------
|
|
The LS1043A integrated multicore processor combines four ARM Cortex-A53
|
|
processor cores with datapath acceleration optimized for L2/3 packet
|
|
processing, single pass security offload and robust traffic management
|
|
and quality of service.
|
|
|
|
The LS1043A SoC includes the following function and features:
|
|
- Four 64-bit ARM Cortex-A53 CPUs
|
|
- 1 MB unified L2 Cache
|
|
- One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving
|
|
support
|
|
- Data Path Acceleration Architecture (DPAA) incorporating acceleration the
|
|
the following functions:
|
|
- Packet parsing, classification, and distribution (FMan)
|
|
- Queue management for scheduling, packet sequencing, and congestion
|
|
management (QMan)
|
|
- Hardware buffer management for buffer allocation and de-allocation (BMan)
|
|
- Cryptography acceleration (SEC)
|
|
- Ethernet interfaces by FMan
|
|
- Up to 1 x XFI supporting 10G interface
|
|
- Up to 1 x QSGMII
|
|
- Up to 4 x SGMII supporting 1000Mbps
|
|
- Up to 2 x SGMII supporting 2500Mbps
|
|
- Up to 2 x RGMII supporting 1000Mbps
|
|
- High-speed peripheral interfaces
|
|
- Three PCIe 2.0 controllers, one supporting x4 operation
|
|
- One serial ATA (SATA 3.0) controllers
|
|
- Additional peripheral interfaces
|
|
- Three high-speed USB 3.0 controllers with integrated PHY
|
|
- Enhanced secure digital host controller (eSDXC/eMMC)
|
|
- Quad Serial Peripheral Interface (QSPI) Controller
|
|
- Serial peripheral interface (SPI) controller
|
|
- Four I2C controllers
|
|
- Two DUARTs
|
|
- Integrated flash controller supporting NAND and NOR flash
|
|
- QorIQ platform's trust architecture 2.1
|
|
|
|
LS1088A
|
|
--------
|
|
The QorIQ LS1088A processor is built on the Layerscape
|
|
architecture combining eight ARM A53 processor cores
|
|
with advanced, high-performance datapath acceleration
|
|
and networks, peripheral interfaces required for
|
|
networking, wireless infrastructure, and general-purpose
|
|
embedded applications.
|
|
|
|
LS1088A is compliant with the Layerscape Chassis Generation 3.
|
|
|
|
Features summary:
|
|
- 8 32-bit / 64-bit ARM v8 Cortex-A53 CPUs
|
|
- Cores are in 2 cluster of 4-cores each
|
|
- 1MB L2 - Cache per cluster
|
|
- Cache coherent interconnect (CCI-400)
|
|
- 1 64-bit DDR4 SDRAM memory controller with ECC
|
|
- Data path acceleration architecture 2.0 (DPAA2)
|
|
- 4-Lane 10GHz SerDes comprising of WRIOP
|
|
- 4-Lane 10GHz SerDes comprising of PCI, SATA, uQE(TDM/HLDC/UART)
|
|
- Ethernet interfaces: SGMIIs, RGMIIs, QSGMIIs, XFIs
|
|
- QSPI, SPI, IFC2.0 supporting NAND, NOR flash
|
|
- 3 PCIe3.0 , 1 SATA3.0, 2 USB3.0, 1 SDXC, 2 DUARTs etc
|
|
- 2 DUARTs
|
|
- 4 I2C, GPIO
|
|
- Thermal monitor unit(TMU)
|
|
- 4 Flextimers and 1 generic timer
|
|
- Support for hardware virtualization and partitioning enforcement
|
|
- QorIQ platform's trust architecture 3.0
|
|
- Service processor (SP) provides pre-boot initialization and secure-boot
|
|
capabilities
|
|
|
|
LS2080A
|
|
--------
|
|
The LS2080A integrated multicore processor combines eight ARM Cortex-A57
|
|
processor cores with high-performance data path acceleration logic and network
|
|
and peripheral bus interfaces required for networking, telecom/datacom,
|
|
wireless infrastructure, and mil/aerospace applications.
|
|
|
|
The LS2080A SoC includes the following function and features:
|
|
|
|
- Eight 64-bit ARM Cortex-A57 CPUs
|
|
- 1 MB platform cache with ECC
|
|
- Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
|
|
- One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
|
|
the AIOP
|
|
- Data path acceleration architecture (DPAA2) incorporating acceleration for
|
|
the following functions:
|
|
- Packet parsing, classification, and distribution (WRIOP)
|
|
- Queue and Hardware buffer management for scheduling, packet sequencing, and
|
|
congestion management, buffer allocation and de-allocation (QBMan)
|
|
- Cryptography acceleration (SEC) at up to 10 Gbps
|
|
- RegEx pattern matching acceleration (PME) at up to 10 Gbps
|
|
- Decompression/compression acceleration (DCE) at up to 20 Gbps
|
|
- Accelerated I/O processing (AIOP) at up to 20 Gbps
|
|
- QDMA engine
|
|
- 16 SerDes lanes at up to 10.3125 GHz
|
|
- Ethernet interfaces
|
|
- Up to eight 10 Gbps Ethernet MACs
|
|
- Up to eight 1 / 2.5 Gbps Ethernet MACs
|
|
- High-speed peripheral interfaces
|
|
- Four PCIe 3.0 controllers, one supporting SR-IOV
|
|
- Additional peripheral interfaces
|
|
- Two serial ATA (SATA 3.0) controllers
|
|
- Two high-speed USB 3.0 controllers with integrated PHY
|
|
- Enhanced secure digital host controller (eSDXC/eMMC)
|
|
- Serial peripheral interface (SPI) controller
|
|
- Quad Serial Peripheral Interface (QSPI) Controller
|
|
- Four I2C controllers
|
|
- Two DUARTs
|
|
- Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
|
|
- Support for hardware virtualization and partitioning enforcement
|
|
- QorIQ platform's trust architecture 3.0
|
|
- Service processor (SP) provides pre-boot initialization and secure-boot
|
|
capabilities
|
|
|
|
LS1012A
|
|
--------
|
|
The LS1012A features an advanced 64-bit ARM v8 Cortex-
|
|
A53 processor, with 32 KB of parity protected L1-I cache,
|
|
32 KB of ECC protected L1-D cache, as well as 256 KB of
|
|
ECC protected L2 cache.
|
|
|
|
The LS1012A SoC includes the following function and features:
|
|
- One 64-bit ARM v8 Cortex-A53 core with the following capabilities:
|
|
- ARM v8 cryptography extensions
|
|
- One 16-bit DDR3L SDRAM memory controller, Up to 1.0 GT/s, Supports
|
|
16-/8-bit operation (no ECC support)
|
|
- ARM core-link CCI-400 cache coherent interconnect
|
|
- Packet Forwarding Engine (PFE)
|
|
- Cryptography acceleration (SEC)
|
|
- Ethernet interfaces supported by PFE:
|
|
- One Configurable x3 SerDes:
|
|
Two Serdes PLLs supported for usage by any SerDes data lane
|
|
Support for up to 6 GBaud operation
|
|
- High-speed peripheral interfaces:
|
|
- One PCI Express Gen2 controller, supporting x1 operation
|
|
- One serial ATA (SATA Gen 3.0) controller
|
|
- One USB 3.0/2.0 controller with integrated PHY
|
|
- One USB 2.0 controller with ULPI interface. .
|
|
- Additional peripheral interfaces:
|
|
- One quad serial peripheral interface (QuadSPI) controller
|
|
- One serial peripheral interface (SPI) controller
|
|
- Two enhanced secure digital host controllers
|
|
- Two I2C controllers
|
|
- One 16550 compliant DUART (two UART interfaces)
|
|
- Two general purpose IOs (GPIO)
|
|
- Two FlexTimers
|
|
- Five synchronous audio interfaces (SAI)
|
|
- Pre-boot loader (PBL) provides pre-boot initialization and RCW loading
|
|
- Single-source clocking solution enabling generation of core, platform,
|
|
DDR, SerDes, and USB clocks from a single external crystal and internal
|
|
crystaloscillator
|
|
- Thermal monitor unit (TMU) with +/- 3C accuracy
|
|
- Two WatchDog timers
|
|
- ARM generic timer
|
|
- QorIQ platform's trust architecture 2.1
|
|
|
|
LS1046A
|
|
--------
|
|
The LS1046A integrated multicore processor combines four ARM Cortex-A72
|
|
processor cores with datapath acceleration optimized for L2/3 packet
|
|
processing, single pass security offload and robust traffic management
|
|
and quality of service.
|
|
|
|
The LS1046A SoC includes the following function and features:
|
|
- Four 64-bit ARM Cortex-A72 CPUs
|
|
- 2 MB unified L2 Cache
|
|
- One 64-bit DDR4 SDRAM memory controllers with ECC and interleaving
|
|
support
|
|
- Data Path Acceleration Architecture (DPAA) incorporating acceleration the
|
|
the following functions:
|
|
- Packet parsing, classification, and distribution (FMan)
|
|
- Queue management for scheduling, packet sequencing, and congestion
|
|
management (QMan)
|
|
- Hardware buffer management for buffer allocation and de-allocation (BMan)
|
|
- Cryptography acceleration (SEC)
|
|
- Two Configurable x4 SerDes
|
|
- Two PLLs per four-lane SerDes
|
|
- Support for 10G operation
|
|
- Ethernet interfaces by FMan
|
|
- Up to 2 x XFI supporting 10G interface (MAC 9, 10)
|
|
- Up to 1 x QSGMII (MAC 5, 6, 10, 1)
|
|
- Up to 4 x SGMII supporting 1000Mbps (MAC 5, 6, 9, 10)
|
|
- Up to 3 x SGMII supporting 2500Mbps (MAC 5, 9, 10)
|
|
- Up to 2 x RGMII supporting 1000Mbps (MAC 3, 4)
|
|
- High-speed peripheral interfaces
|
|
- Three PCIe 3.0 controllers, one supporting x4 operation
|
|
- One serial ATA (SATA 3.0) controllers
|
|
- Additional peripheral interfaces
|
|
- Three high-speed USB 3.0 controllers with integrated PHY
|
|
- Enhanced secure digital host controller (eSDXC/eMMC)
|
|
- Quad Serial Peripheral Interface (QSPI) Controller
|
|
- Serial peripheral interface (SPI) controller
|
|
- Four I2C controllers
|
|
- Two DUARTs
|
|
- Integrated flash controller (IFC) supporting NAND and NOR flash
|
|
- QorIQ platform's trust architecture 2.1
|
|
|
|
LS2088A
|
|
--------
|
|
The LS2088A integrated multicore processor combines eight ARM Cortex-A72
|
|
processor cores with high-performance data path acceleration logic and network
|
|
and peripheral bus interfaces required for networking, telecom/datacom,
|
|
wireless infrastructure, and mil/aerospace applications.
|
|
|
|
The LS2088A SoC includes the following function and features:
|
|
|
|
- Eight 64-bit ARM Cortex-A72 CPUs
|
|
- 1 MB platform cache with ECC
|
|
- Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
|
|
- One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
|
|
the AIOP
|
|
- Data path acceleration architecture (DPAA2) incorporating acceleration for
|
|
the following functions:
|
|
- Packet parsing, classification, and distribution (WRIOP)
|
|
- Queue and Hardware buffer management for scheduling, packet sequencing, and
|
|
congestion management, buffer allocation and de-allocation (QBMan)
|
|
- Cryptography acceleration (SEC) at up to 10 Gbps
|
|
- RegEx pattern matching acceleration (PME) at up to 10 Gbps
|
|
- Decompression/compression acceleration (DCE) at up to 20 Gbps
|
|
- Accelerated I/O processing (AIOP) at up to 20 Gbps
|
|
- QDMA engine
|
|
- 16 SerDes lanes at up to 10.3125 GHz
|
|
- Ethernet interfaces
|
|
- Up to eight 10 Gbps Ethernet MACs
|
|
- Up to eight 1 / 2.5 Gbps Ethernet MACs
|
|
- High-speed peripheral interfaces
|
|
- Four PCIe 3.0 controllers, one supporting SR-IOV
|
|
- Additional peripheral interfaces
|
|
- Two serial ATA (SATA 3.0) controllers
|
|
- Two high-speed USB 3.0 controllers with integrated PHY
|
|
- Enhanced secure digital host controller (eSDXC/eMMC)
|
|
- Serial peripheral interface (SPI) controller
|
|
- Quad Serial Peripheral Interface (QSPI) Controller
|
|
- Four I2C controllers
|
|
- Two DUARTs
|
|
- Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
|
|
- Support for hardware virtualization and partitioning enforcement
|
|
- QorIQ platform's trust architecture 3.0
|
|
- Service processor (SP) provides pre-boot initialization and secure-boot
|
|
capabilities
|
|
|
|
LS2088A SoC has 3 more similar SoC personalities
|
|
1)LS2048A, few difference w.r.t. LS2088A:
|
|
a) Four 64-bit ARM v8 Cortex-A72 CPUs
|
|
|
|
2)LS2084A, few difference w.r.t. LS2088A:
|
|
a) No AIOP
|
|
b) No 32-bit DDR3 SDRAM memory
|
|
c) 5 * 1/10G + 5 *1G WRIOP
|
|
d) No L2 switch
|
|
|
|
3)LS2044A, few difference w.r.t. LS2084A:
|
|
a) Four 64-bit ARM v8 Cortex-A72 CPUs
|
|
|
|
LS2081A
|
|
--------
|
|
LS2081A is 40-pin derivative of LS2084A.
|
|
So feature-wise it is same as LS2084A.
|
|
Refer to LS2084A(LS2088A) section above for details.
|
|
|
|
It has one more similar SoC personality
|
|
1)LS2041A, few difference w.r.t. LS2081A:
|
|
a) Four 64-bit ARM v8 Cortex-A72 CPUs
|
|
|
|
LX2160A
|
|
--------
|
|
The QorIQ LX2160A processor is built in the 16FFC process on
|
|
the Layerscape architecture combining sixteen ARM A72 processor
|
|
cores with advanced, high-performance datapath acceleration and
|
|
network, peripheral interfaces required for networking, wireless
|
|
infrastructure, storage, and general-purpose embedded applications.
|
|
|
|
LX2160A is compliant with the Layerscape Chassis Generation 3.2.
|
|
|
|
The LX2160A SoC includes the following function and features:
|
|
Sixteen 32-bit / 64-bit ARM v8 A72 CPUs
|
|
Cache Coherent Interconnect Fabric (CCN508 aka “Eliot”)
|
|
Two 64-bit 3.2GT/s DDR4 SDRAM memory controllers with ECC.
|
|
Data path acceleration architecture (DPAA2)
|
|
24 Serdes lanes at up to 25 GHz
|
|
Ethernet interfaces
|
|
Single WRIOP tile supporting 130Gbps using 18 MACs
|
|
Support for 10G-SXGMII (aka USXGMII).
|
|
Support for SGMII (and 1000Base-KX)
|
|
Support for XFI (and 10GBase-KR)
|
|
Support for CAUI4 (100G); CAUI2 (50G) and 25G-AUI(25G).
|
|
Support for XLAUI (and 40GBase-KR4) for 40G.
|
|
Support for two RGMII parallel interfaces.
|
|
Energy efficient Ethernet support (802.3az)
|
|
IEEE 1588 support.
|
|
High-speed peripheral interfaces
|
|
Two PCIe Gen 4.0 8-lane controllers supporting SR-IOV,
|
|
Four PCIe Gen 4.0 4-lane controllers.
|
|
Four serial ATA (SATA 3.0) controllers.
|
|
Two USB 3.0 controllers with integrated PHY
|
|
Two Enhanced secure digital host controllers
|
|
Two Controller Area Network (CAN) modules
|
|
Flexible Serial peripheral interface (FlexSPI) controller.
|
|
Three Serial peripheral interface (SPI) controllers.
|
|
Eight I2C Controllers.
|
|
Four PL011 UARTs supporting two 4-pin UART ports or four 2-pin UART ports.
|
|
General Purpose IO (GPIO)
|
|
Support for hardware virtualization and partitioning (ARM MMU-500)
|
|
Support for GIC (ARM GIC-500)
|
|
QorIQ platform Trust Architecture 3.0
|
|
One Secure WatchDog timer and one Non-Secure Watchdog timer.
|
|
ARM Generic Timer
|
|
Two Flextimers
|
|
Debug supporting run control, data acquisition, high-speed trace,
|
|
performance/event monitoring
|
|
Thermal Monitor Unit (TMU) with +/- 2C accuracy
|
|
Support for Voltage ID (VID) for yield improvement
|
|
|
|
LX2160A SoC has 2 more similar SoC personalities
|
|
1)LX2120A, few difference w.r.t. LX2160A:
|
|
a) Twelve 64-bit ARM v8 Cortex-A72 CPUs
|
|
|
|
2)LX2080A, few difference w.r.t. LX2160A:
|
|
a) Eight 64-bit ARM v8 Cortex-A72 CPUs
|
|
|
|
|
|
LS1028A
|
|
--------
|
|
The QorIQ LS1028A processor integrates two 64-bit Arm Cortex-A72 cores with
|
|
a GPU and LCD controller, as well as two TSN-enabled Ethernet controllers and
|
|
a TSNenabled 4-port switch.
|
|
|
|
The high performance Cortex-A72 cores, performing above 16,000 CoreMarks,
|
|
combined with 2.5 Gbit Ethernet, PCI express Gen 3.0, SATA 3.0, USB 3.0 and
|
|
Octal/Quad SPI interfaces provide capabilities for a number of industrial and
|
|
embedded applications. The device provides excellent integration with the
|
|
new Time-Sensitive Networking standard, and enables a number of
|
|
TSN applications.
|
|
|
|
The LS1028A SoC includes the following function and features:
|
|
- Two 64-bit ARM v8 A72 CPUs
|
|
- Cache Coherent interconnect (CCI-400)
|
|
- One 32-bit DDR3L/DDR4 SDRAM memory controller with ECC
|
|
- eDP/Displayport interface
|
|
- Graphics processing unit
|
|
- One Configurable x4 SerDes
|
|
- Ethernet interfaces
|
|
- Non-switched: One Ethernet MAC supporting 2.5G, 1G, 100M, 10M, one
|
|
ethernet MAC supporting 1G, 100M, 10M.
|
|
- Switched: TSN IP to support four 2.5/1G interfaces.
|
|
- None of the MACs support MACSEC
|
|
- Support for RGMII, SGMII (and 1000Base-KX), SGMII 2.5x, QSGMII
|
|
- Support for 10G-SXGMII and 10G-QXGMII.
|
|
- Energy efficient Ethernet support (802.3az)
|
|
- IEEE 1588 support
|
|
- High-speed peripheral interfaces
|
|
- Two PCIe 3.0 controllers, one supporting x4 operation
|
|
- One serial ATA (SATA 3.0) controller
|
|
- Additional peripheral interfaces
|
|
- Two high-speed USB 2.0/3.0 controllers with integrated PHY each
|
|
supporting host or device modes
|
|
- Two Enhanced secure digital host controllers (SD/SDIO/eMMC)
|
|
- Two Serial peripheral interface (SPI) controllers
|
|
- Eight I2C controllers
|
|
- Two UART controllers
|
|
- Additional six Industrual UARTs (LPUART).
|
|
- One FlexSPI controller
|
|
- General Purpose IO (GPIO)
|
|
- Two CAN-FD interfaces
|
|
- Eight Flextimers with PWM I/O
|
|
- Support for hardware virtualization and partitioning enforcement
|
|
- Layerscape Trust Architecture
|
|
- Service Processor (SP) provides pre-boot initialization and secure-boot
|
|
capabilities
|