Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-19 03:08:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/esd/cpci405/cpci405.c
Wolfgang Denk cdb749778a Rename getenv_r() into getenv_f() 
While running from flash, i. e. before relocation, we have only a
limited C runtime environment without writable data segment. In this
phase, some configurations (for example with environment in EEPROM)
must not use the normal getenv(), but a special function.  This
function had been called getenv_r(), with the idea that the "_r"
suffix would mean the same as in the _r_eentrant versions of some of
the C library functions (for example getdate vs. getdate_r, getgrent
vs. getgrent_r, etc.).

Unfortunately this was a misleading name, as in U-Boot the "_r"
generally means "running from RAM", i. e. _after_ relocation.

To avoid confusion, rename into getenv_f() [as "running from flash"]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
2010-08-04 00:45:36 +02:00

792 lines
18 KiB
C
Raw Blame History

/*
* (C) Copyright 2001-2003
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <command.h>
#include <malloc.h>
#include <net.h>
#include <pci.h>
DECLARE_GLOBAL_DATA_PTR;
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
extern void __ft_board_setup(void *blob, bd_t *bd);
#undef FPGA_DEBUG
/* fpga configuration data - generated by bin2cc */
const unsigned char fpgadata[] =
{
#if defined(CONFIG_CPCI405_VER2)
# if defined(CONFIG_CPCI405AB)
# include "fpgadata_cpci405ab.c"
# else
# include "fpgadata_cpci4052.c"
# endif
#else
# include "fpgadata_cpci405.c"
#endif
};
/*
* include common fpga code (for esd boards)
*/
#include "../common/fpga.c"
#include "../common/auto_update.h"
#if defined(CONFIG_CPCI405AB)
au_image_t au_image[] = {
{"cpci405ab/preinst.img", 0, -1, AU_SCRIPT},
{"cpci405ab/pImage", 0xffc00000, 0x000c0000, AU_NOR},
{"cpci405ab/pImage.initrd", 0xffcc0000, 0x00300000, AU_NOR},
{"cpci405ab/u-boot.img", 0xfffc0000, 0x00040000, AU_FIRMWARE},
{"cpci405ab/postinst.img", 0, 0, AU_SCRIPT},
};
#else
#if defined(CONFIG_CPCI405_VER2)
au_image_t au_image[] = {
{"cpci4052/preinst.img", 0, -1, AU_SCRIPT},
{"cpci4052/pImage", 0xffc00000, 0x000c0000, AU_NOR},
{"cpci4052/pImage.initrd", 0xffcc0000, 0x00300000, AU_NOR},
{"cpci4052/u-boot.img", 0xfffc0000, 0x00040000, AU_FIRMWARE},
{"cpci4052/postinst.img", 0, 0, AU_SCRIPT},
};
#else
au_image_t au_image[] = {
{"cpci405/preinst.img", 0, -1, AU_SCRIPT},
{"cpci405/pImage", 0xffc00000, 0x000c0000, AU_NOR},
{"cpci405/pImage.initrd", 0xffcc0000, 0x00310000, AU_NOR},
{"cpci405/u-boot.img", 0xfffd0000, 0x00030000, AU_FIRMWARE},
{"cpci405/postinst.img", 0, 0, AU_SCRIPT},
};
#endif
#endif
int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
/* Prototypes */
int cpci405_version(void);
void lxt971_no_sleep(void);
int board_early_init_f(void)
{
#ifndef CONFIG_CPCI405_VER2
int index, len, i;
int status;
#endif
#ifdef FPGA_DEBUG
/* set up serial port with default baudrate */
(void)get_clocks();
gd->baudrate = CONFIG_BAUDRATE;
serial_init();
console_init_f();
#endif
/*
* First pull fpga-prg pin low,
* to disable fpga logic (on version 2 board)
*/
out_be32((void *)GPIO0_ODR, 0x00000000); /* no open drain pins */
out_be32((void *)GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */
out_be32((void *)GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */
out_be32((void *)GPIO0_OR, 0); /* pull prg low */
/*
* Boot onboard FPGA
*/
#ifndef CONFIG_CPCI405_VER2
if (cpci405_version() == 1) {
status = fpga_boot((unsigned char *)fpgadata, sizeof(fpgadata));
if (status != 0) {
/* booting FPGA failed */
#ifndef FPGA_DEBUG
/* set up serial port with default baudrate */
(void)get_clocks();
gd->baudrate = CONFIG_BAUDRATE;
serial_init();
console_init_f();
#endif
printf("\nFPGA: Booting failed ");
switch (status) {
case ERROR_FPGA_PRG_INIT_LOW:
printf("(Timeout: INIT not low after "
"asserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_INIT_HIGH:
printf("(Timeout: INIT not high after "
"deasserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_DONE:
printf("(Timeout: DONE not high after "
"programming FPGA)\n ");
break;
}
/* display infos on fpgaimage */
index = 15;
for (i = 0; i < 4; i++) {
len = fpgadata[index];
printf("FPGA: %s\n", &(fpgadata[index + 1]));
index += len + 3;
}
putc('\n');
/* delayed reboot */
for (i = 20; i > 0; i--) {
printf("Rebooting in %2d seconds \r",i);
for (index = 0; index < 1000; index++)
udelay(1000);
}
putc('\n');
do_reset(NULL, 0, 0, NULL);
}
}
#endif /* !CONFIG_CPCI405_VER2 */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
* IRQ 16 405GP internally generated; active low; level sensitive
* IRQ 17-24 RESERVED
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
* IRQ 26 (EXT IRQ 1) CAN1 (+FPGA on CPCI4052); active low; level sens.
* IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
* IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
* IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
#if defined(CONFIG_CPCI405_6U)
if (cpci405_version() == 3) {
mtdcr(UIC0PR, 0xFFFFFF99); /* set int polarities */
} else {
mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */
}
#else
mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */
#endif
mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,
* INT0 highest priority */
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
int ctermm2(void)
{
#if defined(CONFIG_CPCI405_VER2)
return 0; /* no, board is cpci405 */
#else
if ((in_8((void*)0xf0000400) == 0x00) &&
(in_8((void*)0xf0000401) == 0x01))
return 0; /* no, board is cpci405 */
else
return -1; /* yes, board is cterm-m2 */
#endif
}
int cpci405_host(void)
{
if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
return -1; /* yes, board is cpci405 host */
else
return 0; /* no, board is cpci405 adapter */
}
int cpci405_version(void)
{
unsigned long CPC0_CR0Reg;
unsigned long value;
/*
* Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO)
*/
CPC0_CR0Reg = mfdcr(CPC0_CR0);
mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03000000);
out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00180000);
out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00180000);
udelay(1000); /* wait some time before reading input */
value = in_be32((void*)GPIO0_IR) & 0x00180000; /* get config bits */
/*
* Restore GPIO settings
*/
mtdcr(CPC0_CR0, CPC0_CR0Reg);
switch (value) {
case 0x00180000:
/* CS2==1 && CS3==1 -> version 1 */
return 1;
case 0x00080000:
/* CS2==0 && CS3==1 -> version 2 */
return 2;
case 0x00100000:
/* CS2==1 && CS3==0 -> version 3 or 6U board */
return 3;
case 0x00000000:
/* CS2==0 && CS3==0 -> version 4 */
return 4;
default:
/* should not be reached! */
return 2;
}
}
int misc_init_r (void)
{
unsigned long CPC0_CR0Reg;
/* adjust flash start and offset */
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
#if defined(CONFIG_CPCI405_VER2)
{
unsigned char *dst;
ulong len = sizeof(fpgadata);
int status;
int index;
int i;
/*
* On CPCI-405 version 2 the environment is saved in eeprom!
* FPGA can be gzip compressed (malloc) and booted this late.
*/
if (cpci405_version() >= 2) {
/*
* Setup GPIO pins (CS6+CS7 as GPIO)
*/
CPC0_CR0Reg = mfdcr(CPC0_CR0);
mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE,
(uchar *)fpgadata, &len) != 0) {
printf("GUNZIP ERROR - must RESET board to recover\n");
do_reset(NULL, 0, 0, NULL);
}
status = fpga_boot(dst, len);
if (status != 0) {
printf("\nFPGA: Booting failed ");
switch (status) {
case ERROR_FPGA_PRG_INIT_LOW:
printf("(Timeout: INIT not low after "
"asserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_INIT_HIGH:
printf("(Timeout: INIT not high after "
"deasserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_DONE:
printf("(Timeout: DONE not high after "
"programming FPGA)\n ");
break;
}
/* display infos on fpgaimage */
index = 15;
for (i = 0; i < 4; i++) {
len = dst[index];
printf("FPGA: %s\n", &(dst[index + 1]));
index += len + 3;
}
putc('\n');
/* delayed reboot */
for (i = 20; i > 0; i--) {
printf("Rebooting in %2d seconds \r", i);
for (index = 0; index < 1000; index++)
udelay(1000);
}
putc('\n');
do_reset(NULL, 0, 0, NULL);
}
/* restore gpio/cs settings */
mtdcr(CPC0_CR0, CPC0_CR0Reg);
puts("FPGA: ");
/* display infos on fpgaimage */
index = 15;
for (i = 0; i < 4; i++) {
len = dst[index];
printf("%s ", &(dst[index + 1]));
index += len + 3;
}
putc('\n');
free(dst);
/*
* Reset FPGA via FPGA_DATA pin
*/
SET_FPGA(FPGA_PRG | FPGA_CLK);
udelay(1000); /* wait 1ms */
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
udelay(1000); /* wait 1ms */
#if defined(CONFIG_CPCI405_6U)
#error HIER GETH ES WEITER MIT IO ACCESSORS
if (cpci405_version() == 3) {
/*
* Enable outputs in fpga on version 3 board
*/
out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) |
CONFIG_SYS_FPGA_MODE_ENABLE_OUTPUT);
/*
* Set outputs to 0
*/
out_8((void*)CONFIG_SYS_LED_ADDR, 0x00);
/*
* Reset external DUART
*/
out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) |
CONFIG_SYS_FPGA_MODE_DUART_RESET);
udelay(100);
out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) &
~CONFIG_SYS_FPGA_MODE_DUART_RESET);
}
#endif
}
else {
puts("\n*** U-Boot Version does not match Board Version!\n");
puts("*** CPCI-405 Version 1.x detected!\n");
puts("*** Please use correct U-Boot version "
"(CPCI405 instead of CPCI4052)!\n\n");
}
}
#else /* CONFIG_CPCI405_VER2 */
if (cpci405_version() >= 2) {
puts("\n*** U-Boot Version does not match Board Version!\n");
puts("*** CPCI-405 Board Version 2.x detected!\n");
puts("*** Please use correct U-Boot version "
"(CPCI4052 instead of CPCI405)!\n\n");
}
#endif /* CONFIG_CPCI405_VER2 */
/*
* Select cts (and not dsr) on uart1
*/
CPC0_CR0Reg = mfdcr(CPC0_CR0);
mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
return 0;
}
/*
* Check Board Identity:
*/
int checkboard(void)
{
#ifndef CONFIG_CPCI405_VER2
int index;
int len;
#endif
char str[64];
int i = getenv_f("serial#", str, sizeof(str));
unsigned short ver;
puts("Board: ");
if (i == -1)
puts("### No HW ID - assuming CPCI405");
else
puts(str);
ver = cpci405_version();
printf(" (Ver %d.x, ", ver);
if (ctermm2()) {
char str[4];
/*
* Read board-id and save in env-variable
*/
sprintf(str, "%d", *(unsigned char *)0xf0000400);
setenv("boardid", str);
printf("CTERM-M2 - Id=%s)", str);
} else {
if (cpci405_host())
puts("PCI Host Version)");
else
puts("PCI Adapter Version)");
}
#ifndef CONFIG_CPCI405_VER2
puts("\nFPGA: ");
/* display infos on fpgaimage */
index = 15;
for (i = 0; i < 4; i++) {
len = fpgadata[index];
printf("%s ", &(fpgadata[index + 1]));
index += len + 3;
}
#endif
putc('\n');
return 0;
}
void reset_phy(void)
{
#if defined(CONFIG_LXT971_NO_SLEEP)
/*
* Disable sleep mode in LXT971
*/
lxt971_no_sleep();
#endif
}
#if defined(CONFIG_CPCI405_VER2) && defined (CONFIG_IDE_RESET)
void ide_set_reset(int on)
{
/*
* Assert or deassert CompactFlash Reset Pin
*/
if (on) { /* assert RESET */
out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) &
~CONFIG_SYS_FPGA_MODE_CF_RESET);
} else { /* release RESET */
out_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR,
in_be16((void*)CONFIG_SYS_FPGA_BASE_ADDR) |
CONFIG_SYS_FPGA_MODE_CF_RESET);
}
}
#endif /* CONFIG_IDE_RESET && CONFIG_CPCI405_VER2 */
#if defined(CONFIG_PCI)
void cpci405_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
{
unsigned char int_line = 0xff;
/*
* Write pci interrupt line register (cpci405 specific)
*/
switch (PCI_DEV(dev) & 0x03) {
case 0:
int_line = 27 + 2;
break;
case 1:
int_line = 27 + 3;
break;
case 2:
int_line = 27 + 0;
break;
case 3:
int_line = 27 + 1;
break;
}
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
}
int pci_pre_init(struct pci_controller *hose)
{
hose->fixup_irq = cpci405_pci_fixup_irq;
return 1;
}
#endif /* defined(CONFIG_PCI) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
int rc;
__ft_board_setup(blob, bd);
/*
* Disable PCI in adapter mode.
*/
if (!cpci405_host()) {
rc = fdt_find_and_setprop(blob, "/plb/pci@ec000000", "status",
"disabled", sizeof("disabled"), 1);
if (rc) {
printf("Unable to update property status in PCI node, "
"err=%s\n",
fdt_strerror(rc));
}
}
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
#if defined(CONFIG_CPCI405AB)
#define ONE_WIRE_CLEAR out_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \
CONFIG_SYS_FPGA_MODE), \
in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \
CONFIG_SYS_FPGA_MODE)) | \
CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
#define ONE_WIRE_SET out_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \
CONFIG_SYS_FPGA_MODE), \
in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \
CONFIG_SYS_FPGA_MODE)) & \
~CONFIG_SYS_FPGA_MODE_1WIRE_DIR)
#define ONE_WIRE_GET (in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR + \
CONFIG_SYS_FPGA_STATUS)) & \
CONFIG_SYS_FPGA_MODE_1WIRE)
/*
* Generate a 1-wire reset, return 1 if no presence detect was found,
* return 0 otherwise.
* (NOTE: Does not handle alarm presence from DS2404/DS1994)
*/
int OWTouchReset(void)
{
int result;
ONE_WIRE_CLEAR;
udelay(480);
ONE_WIRE_SET;
udelay(70);
result = ONE_WIRE_GET;
udelay(410);
return result;
}
/*
* Send 1 a 1-wire write bit.
* Provide 10us recovery time.
*/
void OWWriteBit(int bit)
{
if (bit) {
/*
* write '1' bit
*/
ONE_WIRE_CLEAR;
udelay(6);
ONE_WIRE_SET;
udelay(64);
} else {
/*
* write '0' bit
*/
ONE_WIRE_CLEAR;
udelay(60);
ONE_WIRE_SET;
udelay(10);
}
}
/*
* Read a bit from the 1-wire bus and return it.
* Provide 10us recovery time.
*/
int OWReadBit(void)
{
int result;
ONE_WIRE_CLEAR;
udelay(6);
ONE_WIRE_SET;
udelay(9);
result = ONE_WIRE_GET;
udelay(55);
return result;
}
void OWWriteByte(int data)
{
int loop;
for (loop = 0; loop < 8; loop++) {
OWWriteBit(data & 0x01);
data >>= 1;
}
}
int OWReadByte(void)
{
int loop, result = 0;
for (loop = 0; loop < 8; loop++) {
result >>= 1;
if (OWReadBit())
result |= 0x80;
}
return result;
}
int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
unsigned short val;
int result;
int i;
unsigned char ow_id[6];
char str[32];
unsigned char ow_crc;
/*
* Clear 1-wire bit (open drain with pull-up)
*/
val = in_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR +
CONFIG_SYS_FPGA_MODE));
val &= ~CONFIG_SYS_FPGA_MODE_1WIRE; /* clear 1-wire bit */
out_be16((void*)(CONFIG_SYS_FPGA_BASE_ADDR +
CONFIG_SYS_FPGA_MODE), val);
result = OWTouchReset();
if (result != 0)
puts("No 1-wire device detected!\n");
OWWriteByte(0x33); /* send read rom command */
OWReadByte(); /* skip family code ( == 0x01) */
for (i = 0; i < 6; i++)
ow_id[i] = OWReadByte();
ow_crc = OWReadByte(); /* read crc */
sprintf(str, "%08X%04X",
*(unsigned int *)&ow_id[0],
*(unsigned short *)&ow_id[4]);
printf("Setting environment variable 'ow_id' to %s\n", str);
setenv("ow_id", str);
return 0;
}
U_BOOT_CMD(
onewire, 1, 1, do_onewire,
"Read 1-write ID",
""
);
#define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT24WC32 */
#define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars */
/*
* Write backplane ip-address...
*/
int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bd_t *bd = gd->bd;
char *buf;
ulong crc;
char str[32];
char *ptr;
IPaddr_t ipaddr;
buf = malloc(CONFIG_ENV_SIZE_2);
if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR_2, 0,
(uchar *)buf, CONFIG_ENV_SIZE_2))
puts("\nError reading backplane EEPROM!\n");
else {
crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2 - 4);
if (crc != *(ulong *)buf) {
printf("ERROR: crc mismatch %08lx %08lx\n",
crc, *(ulong *)buf);
return -1;
}
/*
* Find bp_ip
*/
ptr = strstr(buf+4, "bp_ip=");
if (ptr == NULL) {
printf("ERROR: bp_ip not found!\n");
return -1;
}
ptr += 6;
ipaddr = string_to_ip(ptr);
/*
* Update whole ip-addr
*/
bd->bi_ip_addr = ipaddr;
sprintf(str, "%ld.%ld.%ld.%ld",
(bd->bi_ip_addr & 0xff000000) >> 24,
(bd->bi_ip_addr & 0x00ff0000) >> 16,
(bd->bi_ip_addr & 0x0000ff00) >> 8,
(bd->bi_ip_addr & 0x000000ff));
setenv("ipaddr", str);
printf("Updated ip_addr from bp_eeprom to %s!\n", str);
}
free(buf);
return 0;
}
U_BOOT_CMD(
getbpip, 1, 1, do_get_bpip,
"Update IP-Address with Backplane IP-Address",
""
);
/*
* Set and print backplane ip...
*/
int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *buf;
char str[32];
ulong crc;
if (argc < 2) {
puts("ERROR!\n");
return -1;
}
printf("Setting bp_ip to %s\n", argv[1]);
buf = malloc(CONFIG_ENV_SIZE_2);
memset(buf, 0, CONFIG_ENV_SIZE_2);
sprintf(str, "bp_ip=%s", argv[1]);
strcpy(buf+4, str);
crc = crc32(0, (uchar *)(buf+4), CONFIG_ENV_SIZE_2 - 4);
*(ulong *)buf = crc;
if (eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR_2,
0, (uchar *)buf, CONFIG_ENV_SIZE_2))
puts("\nError writing backplane EEPROM!\n");
free(buf);
return 0;
}
U_BOOT_CMD(
setbpip, 2, 1, do_set_bpip,
"Write Backplane IP-Address",
""
);
#endif /* CONFIG_CPCI405AB */
Reference in a new issue View git blame Copy permalink