mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
882b7d726f
The duplication of the do_reset prototype has gotten out of hand, and they're not all in sync. Unify them all in command.h. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
477 lines
12 KiB
C
477 lines
12 KiB
C
/*
|
|
* (C) Copyright 2005-2008
|
|
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
|
|
*
|
|
* (C) Copyright 2001-2003
|
|
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
#include <flash.h>
|
|
#include <mtd/cfi_flash.h>
|
|
#include <asm/4xx_pci.h>
|
|
#include <pci.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#undef FPGA_DEBUG
|
|
|
|
extern void lxt971_no_sleep(void);
|
|
|
|
/* fpga configuration data - gzip compressed and generated by bin2c */
|
|
const unsigned char fpgadata[] =
|
|
{
|
|
#include "fpgadata.c"
|
|
};
|
|
|
|
/*
|
|
* include common fpga code (for esd boards)
|
|
*/
|
|
#include "../common/fpga.c"
|
|
|
|
#ifdef CONFIG_LCD_USED
|
|
/* logo bitmap data - gzip compressed and generated by bin2c */
|
|
unsigned char logo_bmp[] =
|
|
{
|
|
#include "logo_640_480_24bpp.c"
|
|
};
|
|
|
|
/*
|
|
* include common lcd code (for esd boards)
|
|
*/
|
|
#include "../common/lcd.c"
|
|
#include "../common/s1d13505_640_480_16bpp.h"
|
|
#include "../common/s1d13806_640_480_16bpp.h"
|
|
#endif /* CONFIG_LCD_USED */
|
|
|
|
/*
|
|
* include common auto-update code (for esd boards)
|
|
*/
|
|
#include "../common/auto_update.h"
|
|
|
|
au_image_t au_image[] = {
|
|
{"preinst.img", 0, -1, AU_SCRIPT},
|
|
{"u-boot.img", 0xfff80000, 0x00080000, AU_FIRMWARE | AU_PROTECT},
|
|
{"pImage", 0xfe000000, 0x00100000, AU_NOR | AU_PROTECT},
|
|
{"pImage.initrd", 0xfe100000, 0x00400000, AU_NOR | AU_PROTECT},
|
|
{"work.img", 0xfe500000, 0x01400000, AU_NOR},
|
|
{"data.img", 0xff900000, 0x00580000, AU_NOR},
|
|
{"logo.img", 0xffe80000, 0x00100000, AU_NOR | AU_PROTECT},
|
|
{"postinst.img", 0, 0, AU_SCRIPT},
|
|
};
|
|
|
|
int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
|
|
|
|
int board_revision(void)
|
|
{
|
|
unsigned long CPC0_CR0Reg;
|
|
unsigned long value;
|
|
|
|
/*
|
|
* Get version of APC405 board from GPIO's
|
|
*/
|
|
|
|
/* Setup GPIO pins (CS2/GPIO11, CS3/GPIO12 and CS4/GPIO13 as GPIO) */
|
|
CPC0_CR0Reg = mfdcr(CPC0_CR0);
|
|
mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x03800000);
|
|
out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x001c0000);
|
|
out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x001c0000);
|
|
|
|
/* wait some time before reading input */
|
|
udelay(1000);
|
|
|
|
/* get config bits */
|
|
value = in_be32((void*)GPIO0_IR) & 0x001c0000;
|
|
/*
|
|
* Restore GPIO settings
|
|
*/
|
|
mtdcr(CPC0_CR0, CPC0_CR0Reg);
|
|
|
|
switch (value) {
|
|
case 0x001c0000:
|
|
/* CS2==1 && CS3==1 && CS4==1 -> version <= 1.2 */
|
|
return 2;
|
|
case 0x000c0000:
|
|
/* CS2==0 && CS3==1 && CS4==1 -> version 1.3 */
|
|
return 3;
|
|
case 0x00180000:
|
|
/* CS2==1 && CS3==1 && CS4==0 -> version 1.6 */
|
|
return 6;
|
|
case 0x00140000:
|
|
/* CS2==1 && CS3==0 && CS4==1 -> version 1.8 */
|
|
return 8;
|
|
default:
|
|
/* should not be reached! */
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
/*
|
|
* First pull fpga-prg pin low, to disable fpga logic
|
|
*/
|
|
out_be32((void*)GPIO0_ODR, 0x00000000); /* no open drain pins */
|
|
out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */
|
|
out_be32((void*)GPIO0_OR, 0); /* pull prg low */
|
|
|
|
/*
|
|
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
* IRQ 16 405GP internally generated; active low; level sensitive
|
|
* IRQ 17-24 RESERVED
|
|
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
|
|
* IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
|
|
* IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
|
|
* IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
|
|
* IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
|
|
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
|
|
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
|
|
*/
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
|
|
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
|
|
mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */
|
|
mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
|
|
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0 */
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
/*
|
|
* EBC Configuration Register: set ready timeout to 512 ebc-clks
|
|
*/
|
|
mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
|
|
|
|
/*
|
|
* New boards have a single 32MB flash connected to CS0
|
|
* instead of two 16MB flashes on CS0+1.
|
|
*/
|
|
if (board_revision() >= 8) {
|
|
/* disable CS1 */
|
|
mtebc(PB1AP, 0);
|
|
mtebc(PB1CR, 0);
|
|
|
|
/* resize CS0 to 32MB */
|
|
mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP_HWREV8);
|
|
mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR_HWREV8);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
if (gd->board_type >= 8)
|
|
cfi_flash_num_flash_banks = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define FUJI_BASE 0xf0100200
|
|
#define LCDBL_PWM 0xa0
|
|
#define LCDBL_PWMMIN 0xa4
|
|
#define LCDBL_PWMMAX 0xa8
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
u16 *fpga_mode = (u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
|
|
u16 *fpga_ctrl2 =(u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL2);
|
|
u8 *duart0_mcr = (u8 *)(DUART0_BA + 4);
|
|
u8 *duart1_mcr = (u8 *)(DUART1_BA + 4);
|
|
unsigned char *dst;
|
|
ulong len = sizeof(fpgadata);
|
|
int status;
|
|
int index;
|
|
int i;
|
|
unsigned long CPC0_CR0Reg;
|
|
char *str;
|
|
uchar *logo_addr;
|
|
ulong logo_size;
|
|
ushort minb, maxb;
|
|
int result;
|
|
|
|
/*
|
|
* Setup GPIO pins (CS6+CS7 as GPIO)
|
|
*/
|
|
CPC0_CR0Reg = mfdcr(CPC0_CR0);
|
|
mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00300000);
|
|
|
|
dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
|
|
if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
|
|
printf("GUNZIP ERROR - must RESET board to recover\n");
|
|
do_reset(NULL, 0, 0, NULL);
|
|
}
|
|
|
|
status = fpga_boot(dst, len);
|
|
if (status != 0) {
|
|
printf("\nFPGA: Booting failed ");
|
|
switch (status) {
|
|
case ERROR_FPGA_PRG_INIT_LOW:
|
|
printf("(Timeout: "
|
|
"INIT not low after asserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_INIT_HIGH:
|
|
printf("(Timeout: "
|
|
"INIT not high after deasserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_DONE:
|
|
printf("(Timeout: "
|
|
"DONE not high after programming FPGA)\n ");
|
|
break;
|
|
}
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i = 0; i < 4; i++) {
|
|
len = dst[index];
|
|
printf("FPGA: %s\n", &(dst[index+1]));
|
|
index += len + 3;
|
|
}
|
|
putc('\n');
|
|
/* delayed reboot */
|
|
for (i = 20; i > 0; i--) {
|
|
printf("Rebooting in %2d seconds \r",i);
|
|
for (index = 0; index < 1000; index++)
|
|
udelay(1000);
|
|
}
|
|
putc('\n');
|
|
do_reset(NULL, 0, 0, NULL);
|
|
}
|
|
|
|
/* restore gpio/cs settings */
|
|
mtdcr(CPC0_CR0, CPC0_CR0Reg);
|
|
|
|
puts("FPGA: ");
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i = 0; i < 4; i++) {
|
|
len = dst[index];
|
|
printf("%s ", &(dst[index + 1]));
|
|
index += len + 3;
|
|
}
|
|
putc('\n');
|
|
|
|
free(dst);
|
|
|
|
/*
|
|
* Reset FPGA via FPGA_DATA pin
|
|
*/
|
|
SET_FPGA(FPGA_PRG | FPGA_CLK);
|
|
udelay(1000); /* wait 1ms */
|
|
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
|
|
udelay(1000); /* wait 1ms */
|
|
|
|
/*
|
|
* Write board revision in FPGA
|
|
*/
|
|
out_be16(fpga_ctrl2,
|
|
(in_be16(fpga_ctrl2) & 0xfff0) | (gd->board_type & 0x000f));
|
|
|
|
/*
|
|
* Enable power on PS/2 interface (with reset)
|
|
*/
|
|
out_be16(fpga_mode, in_be16(fpga_mode) | CONFIG_SYS_FPGA_CTRL_PS2_RESET);
|
|
for (i=0;i<100;i++)
|
|
udelay(1000);
|
|
udelay(1000);
|
|
out_be16(fpga_mode, in_be16(fpga_mode) & ~CONFIG_SYS_FPGA_CTRL_PS2_RESET);
|
|
|
|
/*
|
|
* Enable interrupts in exar duart mcr[3]
|
|
*/
|
|
out_8(duart0_mcr, 0x08);
|
|
out_8(duart1_mcr, 0x08);
|
|
|
|
/*
|
|
* Init lcd interface and display logo
|
|
*/
|
|
str = getenv("splashimage");
|
|
if (str) {
|
|
logo_addr = (uchar *)simple_strtoul(str, NULL, 16);
|
|
logo_size = CONFIG_SYS_VIDEO_LOGO_MAX_SIZE;
|
|
} else {
|
|
logo_addr = logo_bmp;
|
|
logo_size = sizeof(logo_bmp);
|
|
}
|
|
|
|
if (gd->board_type >= 6) {
|
|
result = lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
|
|
(uchar *)CONFIG_SYS_LCD_BIG_MEM,
|
|
regs_13505_640_480_16bpp,
|
|
sizeof(regs_13505_640_480_16bpp) /
|
|
sizeof(regs_13505_640_480_16bpp[0]),
|
|
logo_addr, logo_size);
|
|
if (result && str) {
|
|
/* retry with internal image */
|
|
logo_addr = logo_bmp;
|
|
logo_size = sizeof(logo_bmp);
|
|
lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
|
|
(uchar *)CONFIG_SYS_LCD_BIG_MEM,
|
|
regs_13505_640_480_16bpp,
|
|
sizeof(regs_13505_640_480_16bpp) /
|
|
sizeof(regs_13505_640_480_16bpp[0]),
|
|
logo_addr, logo_size);
|
|
}
|
|
} else {
|
|
result = lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
|
|
(uchar *)CONFIG_SYS_LCD_BIG_MEM,
|
|
regs_13806_640_480_16bpp,
|
|
sizeof(regs_13806_640_480_16bpp) /
|
|
sizeof(regs_13806_640_480_16bpp[0]),
|
|
logo_addr, logo_size);
|
|
if (result && str) {
|
|
/* retry with internal image */
|
|
logo_addr = logo_bmp;
|
|
logo_size = sizeof(logo_bmp);
|
|
lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG,
|
|
(uchar *)CONFIG_SYS_LCD_BIG_MEM,
|
|
regs_13806_640_480_16bpp,
|
|
sizeof(regs_13806_640_480_16bpp) /
|
|
sizeof(regs_13806_640_480_16bpp[0]),
|
|
logo_addr, logo_size);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset microcontroller and setup backlight PWM controller
|
|
*/
|
|
out_be16(fpga_mode, in_be16(fpga_mode) | 0x0014);
|
|
for (i=0;i<10;i++)
|
|
udelay(1000);
|
|
out_be16(fpga_mode, in_be16(fpga_mode) | 0x001c);
|
|
|
|
minb = 0;
|
|
maxb = 0xff;
|
|
str = getenv("lcdbl");
|
|
if (str) {
|
|
minb = (ushort)simple_strtoul(str, &str, 16) & 0x00ff;
|
|
if (str && (*str=',')) {
|
|
str++;
|
|
maxb = (ushort)simple_strtoul(str, NULL, 16) & 0x00ff;
|
|
} else
|
|
minb = 0;
|
|
|
|
out_be16((u16 *)(FUJI_BASE + LCDBL_PWMMIN), minb);
|
|
out_be16((u16 *)(FUJI_BASE + LCDBL_PWMMAX), maxb);
|
|
|
|
printf("LCDBL: min=0x%02x, max=0x%02x\n", minb, maxb);
|
|
}
|
|
out_be16((u16 *)(FUJI_BASE + LCDBL_PWM), 0xff);
|
|
|
|
/*
|
|
* fix environment for field updated units
|
|
*/
|
|
if (getenv("altbootcmd") == NULL) {
|
|
setenv("usb_load", CONFIG_SYS_USB_LOAD_COMMAND);
|
|
setenv("usbargs", CONFIG_SYS_USB_ARGS);
|
|
setenv("bootcmd", CONFIG_BOOTCOMMAND);
|
|
setenv("usb_self", CONFIG_SYS_USB_SELF_COMMAND);
|
|
setenv("bootlimit", CONFIG_SYS_BOOTLIMIT);
|
|
setenv("altbootcmd", CONFIG_SYS_ALT_BOOTCOMMAND);
|
|
saveenv();
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
int checkboard (void)
|
|
{
|
|
char str[64];
|
|
int i = getenv_f("serial#", str, sizeof(str));
|
|
|
|
puts ("Board: ");
|
|
|
|
if (i == -1) {
|
|
puts ("### No HW ID - assuming APC405");
|
|
} else {
|
|
puts(str);
|
|
}
|
|
|
|
gd->board_type = board_revision();
|
|
printf(", Rev. 1.%ld\n", gd->board_type);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_IDE_RESET
|
|
void ide_set_reset(int on)
|
|
{
|
|
u16 *fpga_mode = (u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
|
|
|
|
/*
|
|
* Assert or deassert CompactFlash Reset Pin
|
|
*/
|
|
if (on) {
|
|
out_be16(fpga_mode,
|
|
in_be16(fpga_mode) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
|
|
} else {
|
|
out_be16(fpga_mode,
|
|
in_be16(fpga_mode) | CONFIG_SYS_FPGA_CTRL_CF_RESET);
|
|
}
|
|
}
|
|
#endif /* CONFIG_IDE_RESET */
|
|
|
|
void reset_phy(void)
|
|
{
|
|
/*
|
|
* Disable sleep mode in LXT971
|
|
*/
|
|
lxt971_no_sleep();
|
|
}
|
|
|
|
#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT)
|
|
int usb_board_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int usb_board_stop(void)
|
|
{
|
|
unsigned short tmp;
|
|
int i;
|
|
|
|
/*
|
|
* reset PCI bus
|
|
* This is required to make some very old Linux OHCI driver
|
|
* work after U-Boot has used the OHCI controller.
|
|
*/
|
|
pci_read_config_word(PCIDEVID_405GP, PCIBRDGOPT2, &tmp);
|
|
pci_write_config_word(PCIDEVID_405GP, PCIBRDGOPT2, (tmp | 0x1000));
|
|
|
|
for (i = 0; i < 100; i++)
|
|
udelay(1000);
|
|
|
|
pci_write_config_word(PCIDEVID_405GP, PCIBRDGOPT2, tmp);
|
|
return 0;
|
|
}
|
|
|
|
int usb_board_init_fail(void)
|
|
{
|
|
usb_board_stop();
|
|
return 0;
|
|
}
|
|
#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */
|