mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 08:59:33 +00:00
db04ff42c7
The help for CONFIG_MTD explains that it needs to be enabled for various things like NAND, etc to be available. It however then doesn't enforce this dependency and so if you have none of these systems present you still need to disable a number of options. Fix this by making places that select/imply one type of flash, but did not do the same, also do this for "MTD". Make boards which hadn't been enabling MTD already but need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it wasn't previously enabled but was now being implied. Signed-off-by: Tom Rini <trini@konsulko.com>
89 lines
2.3 KiB
Text
89 lines
2.3 KiB
Text
CONFIG_MIPS=y
|
|
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
|
|
CONFIG_SYS_MALLOC_LEN=0x100000
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_ENV_SIZE=0x1000
|
|
CONFIG_DEFAULT_DEVICE_TREE="mediatek,mt7621-nand-rfb"
|
|
CONFIG_SPL_SERIAL=y
|
|
CONFIG_SPL_SYS_MALLOC_F_LEN=0x100000
|
|
CONFIG_SPL=y
|
|
CONFIG_DEBUG_UART_BASE=0xbe000c00
|
|
CONFIG_DEBUG_UART_CLOCK=50000000
|
|
CONFIG_SYS_LOAD_ADDR=0x83000000
|
|
CONFIG_ARCH_MTMIPS=y
|
|
CONFIG_SOC_MT7621=y
|
|
CONFIG_MT7621_BOOT_FROM_NAND=y
|
|
CONFIG_BOARD_MT7621_NAND_RFB=y
|
|
CONFIG_SYS_MIPS_TIMER_FREQ=440000000
|
|
# CONFIG_MIPS_CACHE_SETUP is not set
|
|
# CONFIG_MIPS_CACHE_DISABLE is not set
|
|
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
|
|
CONFIG_MIPS_BOOT_FDT=y
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_FIT=y
|
|
CONFIG_SYS_BOOTM_LEN=0x2000000
|
|
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
|
|
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
|
CONFIG_SPL_MAX_SIZE=0x30000
|
|
CONFIG_SPL_BSS_START_ADDR=0x80140000
|
|
CONFIG_SPL_BSS_MAX_SIZE=0x80000
|
|
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
|
CONFIG_SPL_NAND_SUPPORT=y
|
|
CONFIG_SPL_NAND_BASE=y
|
|
CONFIG_SPL_NAND_IDENT=y
|
|
# CONFIG_BOOTM_NETBSD is not set
|
|
# CONFIG_BOOTM_PLAN9 is not set
|
|
# CONFIG_BOOTM_RTEMS is not set
|
|
# CONFIG_BOOTM_VXWORKS is not set
|
|
# CONFIG_CMD_ELF is not set
|
|
# CONFIG_CMD_XIMG is not set
|
|
# CONFIG_CMD_CRC32 is not set
|
|
# CONFIG_CMD_DM is not set
|
|
# CONFIG_CMD_FLASH is not set
|
|
CONFIG_CMD_GPIO=y
|
|
# CONFIG_CMD_LOADS is not set
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_MTD=y
|
|
CONFIG_CMD_PART=y
|
|
# CONFIG_CMD_PINMUX is not set
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_FS_GENERIC=y
|
|
# CONFIG_SPL_DOS_PARTITION is not set
|
|
# CONFIG_ISO_PARTITION is not set
|
|
CONFIG_EFI_PARTITION=y
|
|
# CONFIG_SPL_EFI_PARTITION is not set
|
|
CONFIG_PARTITION_TYPE_GUID=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_NET_RANDOM_ETHADDR=y
|
|
# CONFIG_I2C is not set
|
|
# CONFIG_INPUT is not set
|
|
CONFIG_MMC=y
|
|
# CONFIG_MMC_QUIRKS is not set
|
|
# CONFIG_MMC_HW_PARTITIONING is not set
|
|
CONFIG_MMC_MTK=y
|
|
CONFIG_DM_MTD=y
|
|
CONFIG_MTD_RAW_NAND=y
|
|
CONFIG_NAND_MT7621=y
|
|
CONFIG_SYS_NAND_ONFI_DETECTION=y
|
|
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
|
|
CONFIG_SYS_NAND_U_BOOT_OFFS=0x0
|
|
CONFIG_MEDIATEK_ETH=y
|
|
CONFIG_PHY=y
|
|
CONFIG_PHY_MTK_TPHY=y
|
|
CONFIG_DEBUG_UART_SHIFT=2
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_SYSRESET_RESETCTL=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_XHCI_MTK=y
|
|
CONFIG_USB_STORAGE=y
|
|
CONFIG_WDT=y
|
|
CONFIG_WDT_MT7621=y
|
|
CONFIG_FAT_WRITE=y
|
|
# CONFIG_BINMAN_FDT is not set
|
|
CONFIG_LZMA=y
|
|
# CONFIG_GZIP is not set
|
|
CONFIG_SPL_LZMA=y
|