u-boot/board/samsung/common
Marek Szyprowski 7090ead3f2 ARM: Samsung: Add Exynos5422-based Odroid HC1 support
Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI,
no eMMC, no build-in USB3.0 hub, no extension port pins, and no GPIO
button. USB3.0 ports are used for build-in JMicron USB to SATA bridge
and Gigabit R8152 ethernet chips. HC1 uses only passive cooling.

This patch also updates Odroid's ADCmax array and reduces ADC tolerance
to 1% to ensure that XU4 and HC1 revisions are properly detected.

I've tested this with XU3, XU3-lite, XU4 and HC1 boards. In case of my test
boards I got following values from ADC register: 372, 370, 1281 and 1313.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-12-05 10:18:39 +09:00
..
bootscripts fix: samsung: common: autoboot.cmd: Correct itbcfg definition 2015-06-18 16:11:41 -04:00
board.c dm: gpio: Add live tree support 2017-06-01 07:03:10 -06:00
dfu_sample_env.txt config: trats: trats2: extend dfu_alt_info by env update settings 2014-02-03 16:09:10 +09:00
exynos-uboot-spl.lds exynos: Drop large alignment for SDRAM parameters 2017-02-10 18:51:51 +09:00
exynos5-dt-types.c ARM: Samsung: Add Exynos5422-based Odroid HC1 support 2017-12-05 10:18:39 +09:00
exynos5-dt.c ARM: Samsung: Add Exynos5422-based Odroid HC1 support 2017-12-05 10:18:39 +09:00
gadget.c usb: gadget: Make g_dnl USB settings common 2017-10-03 19:12:05 +02:00
Makefile i2c: Drop CONFIG_SOFT_I2C_MULTI_BUS 2017-04-05 13:55:11 -04:00
misc.c treewide: replace with error() with pr_err() 2017-10-04 11:59:44 -04:00