mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 06:42:56 +00:00
f833e790b4
The original creation of arch/arm/cpu/armv7/{virt-v7.c,nonsec_virt.S} predates the SPDX conversion, so the original elaborate license statements sneaked in. Fix this by replacing them with the proper abbreviation. Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
157 lines
3.9 KiB
C
157 lines
3.9 KiB
C
/*
|
|
* (C) Copyright 2013
|
|
* Andre Przywara, Linaro <andre.przywara@linaro.org>
|
|
*
|
|
* Routines to transition ARMv7 processors from secure into non-secure state
|
|
* and from non-secure SVC into HYP mode
|
|
* needed to enable ARMv7 virtualization for current hypervisors
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/armv7.h>
|
|
#include <asm/gic.h>
|
|
#include <asm/io.h>
|
|
|
|
unsigned long gic_dist_addr;
|
|
|
|
static unsigned int read_cpsr(void)
|
|
{
|
|
unsigned int reg;
|
|
|
|
asm volatile ("mrs %0, cpsr\n" : "=r" (reg));
|
|
return reg;
|
|
}
|
|
|
|
static unsigned int read_id_pfr1(void)
|
|
{
|
|
unsigned int reg;
|
|
|
|
asm("mrc p15, 0, %0, c0, c1, 1\n" : "=r"(reg));
|
|
return reg;
|
|
}
|
|
|
|
static unsigned long get_gicd_base_address(void)
|
|
{
|
|
#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
|
|
return CONFIG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
|
|
#else
|
|
unsigned midr;
|
|
unsigned periphbase;
|
|
|
|
/* check whether we are an Cortex-A15 or A7.
|
|
* The actual HYP switch should work with all CPUs supporting
|
|
* the virtualization extension, but we need the GIC address,
|
|
* which we know only for sure for those two CPUs.
|
|
*/
|
|
asm("mrc p15, 0, %0, c0, c0, 0\n" : "=r"(midr));
|
|
switch (midr & MIDR_PRIMARY_PART_MASK) {
|
|
case MIDR_CORTEX_A9_R0P1:
|
|
case MIDR_CORTEX_A15_R0P0:
|
|
case MIDR_CORTEX_A7_R0P0:
|
|
break;
|
|
default:
|
|
printf("nonsec: could not determine GIC address.\n");
|
|
return -1;
|
|
}
|
|
|
|
/* get the GIC base address from the CBAR register */
|
|
asm("mrc p15, 4, %0, c15, c0, 0\n" : "=r" (periphbase));
|
|
|
|
/* the PERIPHBASE can be mapped above 4 GB (lower 8 bits used to
|
|
* encode this). Bail out here since we cannot access this without
|
|
* enabling paging.
|
|
*/
|
|
if ((periphbase & 0xff) != 0) {
|
|
printf("nonsec: PERIPHBASE is above 4 GB, no access.\n");
|
|
return -1;
|
|
}
|
|
|
|
return (periphbase & CBAR_MASK) + GIC_DIST_OFFSET;
|
|
#endif
|
|
}
|
|
|
|
static void kick_secondary_cpus_gic(unsigned long gicdaddr)
|
|
{
|
|
/* kick all CPUs (except this one) by writing to GICD_SGIR */
|
|
writel(1U << 24, gicdaddr + GICD_SGIR);
|
|
}
|
|
|
|
void __weak smp_kick_all_cpus(void)
|
|
{
|
|
kick_secondary_cpus_gic(gic_dist_addr);
|
|
}
|
|
|
|
int armv7_switch_hyp(void)
|
|
{
|
|
unsigned int reg;
|
|
|
|
/* check whether we are in HYP mode already */
|
|
if ((read_cpsr() & 0x1f) == 0x1a) {
|
|
debug("CPU already in HYP mode\n");
|
|
return 0;
|
|
}
|
|
|
|
/* check whether the CPU supports the virtualization extensions */
|
|
reg = read_id_pfr1();
|
|
if ((reg & CPUID_ARM_VIRT_MASK) != 1 << CPUID_ARM_VIRT_SHIFT) {
|
|
printf("HYP mode: Virtualization extensions not implemented.\n");
|
|
return -1;
|
|
}
|
|
|
|
/* call the HYP switching code on this CPU also */
|
|
_switch_to_hyp();
|
|
|
|
if ((read_cpsr() & 0x1F) != 0x1a) {
|
|
printf("HYP mode: switch not successful.\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int armv7_switch_nonsec(void)
|
|
{
|
|
unsigned int reg;
|
|
unsigned itlinesnr, i;
|
|
|
|
/* check whether the CPU supports the security extensions */
|
|
reg = read_id_pfr1();
|
|
if ((reg & 0xF0) == 0) {
|
|
printf("nonsec: Security extensions not implemented.\n");
|
|
return -1;
|
|
}
|
|
|
|
/* the SCR register will be set directly in the monitor mode handler,
|
|
* according to the spec one should not tinker with it in secure state
|
|
* in SVC mode. Do not try to read it once in non-secure state,
|
|
* any access to it will trap.
|
|
*/
|
|
|
|
gic_dist_addr = get_gicd_base_address();
|
|
if (gic_dist_addr == -1)
|
|
return -1;
|
|
|
|
/* enable the GIC distributor */
|
|
writel(readl(gic_dist_addr + GICD_CTLR) | 0x03,
|
|
gic_dist_addr + GICD_CTLR);
|
|
|
|
/* TYPER[4:0] contains an encoded number of available interrupts */
|
|
itlinesnr = readl(gic_dist_addr + GICD_TYPER) & 0x1f;
|
|
|
|
/* set all bits in the GIC group registers to one to allow access
|
|
* from non-secure state. The first 32 interrupts are private per
|
|
* CPU and will be set later when enabling the GIC for each core
|
|
*/
|
|
for (i = 1; i <= itlinesnr; i++)
|
|
writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
|
|
|
|
smp_set_core_boot_addr((unsigned long)_smp_pen, -1);
|
|
smp_kick_all_cpus();
|
|
|
|
/* call the non-sec switching code on this CPU also */
|
|
_nonsec_init();
|
|
|
|
return 0;
|
|
}
|