u-boot/board/ti/ks2_evm/ddr3_cfg.c
Hao Zhang a906847966 board: k2e-evm: add board support
This patch adds Keystone2 k2e_evm evaluation board support.

Signed-off-by: Hao Zhang <hzhang@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
2014-07-25 16:26:11 -04:00

170 lines
4.8 KiB
C

/*
* Keystone2: DDR3 configuration
*
* (C) Copyright 2012-2014
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <asm/arch/ddr3.h>
#include <asm/arch/hardware.h>
DECLARE_GLOBAL_DATA_PTR;
/* DDR3 PHY configuration data with 1600M rate, 8GB size */
struct ddr3_phy_config ddr3phy_1600_8g = {
.pllcr = 0x0001C000ul,
.pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
.pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
.ptr0 = 0x42C21590ul,
.ptr1 = 0xD05612C0ul,
.ptr2 = 0, /* not set in gel */
.ptr3 = 0x0D861A80ul,
.ptr4 = 0x0C827100ul,
.dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
.dcr_val = ((1 << 10)),
.dtpr0 = 0xA19DBB66ul,
.dtpr1 = 0x32868300ul,
.dtpr2 = 0x50035200ul,
.mr0 = 0x00001C70ul,
.mr1 = 0x00000006ul,
.mr2 = 0x00000018ul,
.dtcr = 0x730035C7ul,
.pgcr2 = 0x00F07A12ul,
.zq0cr1 = 0x0000005Dul,
.zq1cr1 = 0x0000005Bul,
.zq2cr1 = 0x0000005Bul,
.pir_v1 = 0x00000033ul,
.pir_v2 = 0x0000FF81ul,
};
/* DDR3 EMIF configuration data with 1600M rate, 8GB size */
struct ddr3_emif_config ddr3_1600_8g = {
.sdcfg = 0x6200CE6Aul,
.sdtim1 = 0x16709C55ul,
.sdtim2 = 0x00001D4Aul,
.sdtim3 = 0x435DFF54ul,
.sdtim4 = 0x553F0CFFul,
.zqcfg = 0xF0073200ul,
.sdrfc = 0x00001869ul,
};
#ifdef CONFIG_K2HK_EVM
/* DDR3 PHY configuration data with 1333M rate, and 2GB size */
struct ddr3_phy_config ddr3phy_1333_2g = {
.pllcr = 0x0005C000ul,
.pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
.pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
.ptr0 = 0x42C21590ul,
.ptr1 = 0xD05612C0ul,
.ptr2 = 0, /* not set in gel */
.ptr3 = 0x0B4515C2ul,
.ptr4 = 0x0A6E08B4ul,
.dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
.dcr_val = ((1 << 10)),
.dtpr0 = 0x8558AA55ul,
.dtpr1 = 0x32857280ul,
.dtpr2 = 0x5002C200ul,
.mr0 = 0x00001A60ul,
.mr1 = 0x00000006ul,
.mr2 = 0x00000010ul,
.dtcr = 0x710035C7ul,
.pgcr2 = 0x00F065B8ul,
.zq0cr1 = 0x0000005Dul,
.zq1cr1 = 0x0000005Bul,
.zq2cr1 = 0x0000005Bul,
.pir_v1 = 0x00000033ul,
.pir_v2 = 0x0000FF81ul,
};
/* DDR3 EMIF configuration data with 1333M rate, and 2GB size */
struct ddr3_emif_config ddr3_1333_2g = {
.sdcfg = 0x62008C62ul,
.sdtim1 = 0x125C8044ul,
.sdtim2 = 0x00001D29ul,
.sdtim3 = 0x32CDFF43ul,
.sdtim4 = 0x543F0ADFul,
.zqcfg = 0x70073200ul,
.sdrfc = 0x00001457ul,
};
#endif
#ifdef CONFIG_K2E_EVM
/* DDR3 PHY configuration data with 1600M rate, and 4GB size */
struct ddr3_phy_config ddr3phy_1600_4g = {
.pllcr = 0x0001C000ul,
.pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK),
.pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)),
.ptr0 = 0x42C21590ul,
.ptr1 = 0xD05612C0ul,
.ptr2 = 0, /* not set in gel */
.ptr3 = 0x08861A80ul,
.ptr4 = 0x0C827100ul,
.dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
.dcr_val = ((1 << 10)),
.dtpr0 = 0x9D9CBB66ul,
.dtpr1 = 0x12840300ul,
.dtpr2 = 0x5002D200ul,
.mr0 = 0x00001C70ul,
.mr1 = 0x00000006ul,
.mr2 = 0x00000018ul,
.dtcr = 0x710035C7ul,
.pgcr2 = 0x00F07A12ul,
.zq0cr1 = 0x0001005Dul,
.zq1cr1 = 0x0001005Bul,
.zq2cr1 = 0x0001005Bul,
.pir_v1 = 0x00000033ul,
.pir_v2 = 0x0000FF81ul,
};
/* DDR3 EMIF configuration data with 1600M rate, and 4GB size */
struct ddr3_emif_config ddr3_1600_4g = {
.sdcfg = 0x6200CE62ul,
.sdtim1 = 0x166C9855ul,
.sdtim2 = 0x00001D4Aul,
.sdtim3 = 0x421DFF53ul,
.sdtim4 = 0x543F07FFul,
.zqcfg = 0x70073200ul,
.sdrfc = 0x00001869ul,
};
#endif
int ddr3_get_dimm_params(char *dimm_name)
{
int ret;
int old_bus;
u8 spd_params[256];
i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE);
old_bus = i2c_get_bus_num();
i2c_set_bus_num(1);
ret = i2c_read(0x53, 0, 1, spd_params, 256);
i2c_set_bus_num(old_bus);
dimm_name[0] = '\0';
if (ret) {
puts("Cannot read DIMM params\n");
return 1;
}
/*
* We need to convert spd data to dimm parameters
* and to DDR3 EMIF and PHY regirsters values.
* For now we just return DIMM type string value.
* Caller may use this value to choose appropriate
* a pre-set DDR3 configuration
*/
strncpy(dimm_name, (char *)&spd_params[0x80], 18);
dimm_name[18] = '\0';
return 0;
}