mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
b86986c7b3
Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
896 lines
30 KiB
Text
896 lines
30 KiB
Text
#
|
|
# Video configuration
|
|
#
|
|
|
|
menu "Graphics support"
|
|
|
|
config VIDEO
|
|
bool "Enable driver model support for LCD/video"
|
|
depends on DM
|
|
help
|
|
This enables driver model for LCD and video devices. These support
|
|
a bitmap display of various sizes and depths which can be drawn on
|
|
to display a command-line console or splash screen. Enabling this
|
|
option compiles in the video uclass and routes all LCD/video access
|
|
through this.
|
|
|
|
if VIDEO
|
|
|
|
config VIDEO_LOGO
|
|
bool "Show the U-Boot logo on the display"
|
|
default y if !SPLASH_SCREEN
|
|
select VIDEO_BMP_RLE8
|
|
help
|
|
This enables showing the U-Boot logo on the display when a video
|
|
device is probed. It appears at the top right. The logo itself is at
|
|
tools/logos/u-boot_logo.bmp and looks best when the display has a
|
|
black background.
|
|
|
|
config BACKLIGHT
|
|
bool "Enable panel backlight uclass support"
|
|
default y
|
|
help
|
|
This provides backlight uclass driver that enables basic panel
|
|
backlight support.
|
|
|
|
config VIDEO_PCI_DEFAULT_FB_SIZE
|
|
hex "Default framebuffer size to use if no drivers request it"
|
|
default 0x1000000 if X86 && PCI
|
|
default 0 if !(X86 && PCI)
|
|
help
|
|
Generally, video drivers request the amount of memory they need for
|
|
the frame buffer when they are bound, by setting the size field in
|
|
struct video_uc_plat. That memory is then reserved for use after
|
|
relocation. But PCI drivers cannot be bound before relocation unless
|
|
they are mentioned in the devicetree.
|
|
|
|
With this value set appropriately, it is possible for PCI video
|
|
devices to have a framebuffer allocated by U-Boot.
|
|
|
|
Note: the framebuffer needs to be large enough to store all pixels at
|
|
maximum resolution. For example, at 1920 x 1200 with 32 bits per
|
|
pixel, 2560 * 1600 * 32 / 8 = 0xfa0000 bytes are needed.
|
|
|
|
config VIDEO_COPY
|
|
bool "Enable copying the frame buffer to a hardware copy"
|
|
help
|
|
On some machines (e.g. x86), reading from the frame buffer is very
|
|
slow because it is uncached. To improve performance, this feature
|
|
allows the frame buffer to be kept in cached memory (allocated by
|
|
U-Boot) and then copied to the hardware frame-buffer as needed.
|
|
|
|
To use this, your video driver must set @copy_base in
|
|
struct video_uc_plat.
|
|
|
|
config BACKLIGHT_PWM
|
|
bool "Generic PWM based Backlight Driver"
|
|
depends on BACKLIGHT && DM_PWM
|
|
default y
|
|
help
|
|
If you have a LCD backlight adjustable by PWM, say Y to enable
|
|
this driver.
|
|
This driver can be use with "simple-panel" and
|
|
it understands the standard device tree
|
|
(leds/backlight/pwm-backlight.txt)
|
|
|
|
config BACKLIGHT_GPIO
|
|
bool "Generic GPIO based Backlight Driver"
|
|
depends on BACKLIGHT
|
|
help
|
|
If you have a LCD backlight adjustable by GPIO, say Y to enable
|
|
this driver.
|
|
This driver can be used with "simple-panel" and
|
|
it understands the standard device tree
|
|
(leds/backlight/gpio-backlight.txt)
|
|
|
|
config VIDEO_BPP8
|
|
bool "Support 8-bit-per-pixel displays"
|
|
default y
|
|
help
|
|
Support drawing text and bitmaps onto a 8-bit-per-pixel display.
|
|
Enabling this will include code to support this display. Without
|
|
this option, such displays will not be supported and console output
|
|
will be empty.
|
|
|
|
config VIDEO_BPP16
|
|
bool "Support 16-bit-per-pixel displays"
|
|
default y
|
|
help
|
|
Support drawing text and bitmaps onto a 16-bit-per-pixel display.
|
|
Enabling this will include code to support this display. Without
|
|
this option, such displays will not be supported and console output
|
|
will be empty.
|
|
|
|
config VIDEO_BPP32
|
|
bool "Support 32-bit-per-pixel displays"
|
|
default y
|
|
help
|
|
Support drawing text and bitmaps onto a 32-bit-per-pixel display.
|
|
Enabling this will include code to support this display. Without
|
|
this option, such displays will not be supported and console output
|
|
will be empty.
|
|
|
|
config VIDEO_ANSI
|
|
bool "Support ANSI escape sequences in video console"
|
|
default y
|
|
help
|
|
Enable ANSI escape sequence decoding for a more fully functional
|
|
console.
|
|
|
|
config VIDEO_MIPI_DSI
|
|
bool "Support MIPI DSI interface"
|
|
help
|
|
Support MIPI DSI interface for driving a MIPI compatible device.
|
|
The MIPI Display Serial Interface (MIPI DSI) defines a high-speed
|
|
serial interface between a host processor and a display module.
|
|
|
|
config CONSOLE_NORMAL
|
|
bool "Support a simple text console"
|
|
default y
|
|
help
|
|
Support drawing text on the frame buffer console so that it can be
|
|
used as a console. Rotation is not supported by this driver (see
|
|
CONFIG_CONSOLE_ROTATION for that). A built-in 8x16 font is used
|
|
for the display.
|
|
|
|
config CONSOLE_ROTATION
|
|
bool "Support rotated displays"
|
|
help
|
|
Sometimes, for example if the display is mounted in portrait
|
|
mode or even if it's mounted landscape but rotated by 180degree,
|
|
we need to rotate our content of the display relative to the
|
|
framebuffer, so that user can read the messages which are
|
|
printed out. Enable this option to include a text driver which can
|
|
support this. The rotation is set by the 'rot' parameter in
|
|
struct video_priv: 0=unrotated, 1=90 degrees clockwise, 2=180
|
|
degrees, 3=270 degrees.
|
|
|
|
config CONSOLE_TRUETYPE
|
|
bool "Support a console that uses TrueType fonts"
|
|
help
|
|
TrueTrype fonts can provide outline-drawing capability rather than
|
|
needing to provide a bitmap for each font and size that is needed.
|
|
With this option you can adjust the text size and use a variety of
|
|
fonts. Note that this is noticeably slower than with normal console.
|
|
|
|
config CONSOLE_TRUETYPE_SIZE
|
|
int "TrueType font size"
|
|
depends on CONSOLE_TRUETYPE
|
|
default 18
|
|
help
|
|
This sets the font size for the console. The size is measured in
|
|
pixels and is the nominal height of a character. Note that fonts
|
|
are commonly measured in 'points', being 1/72 inch (about 3.52mm).
|
|
However that measurement depends on the size of your display and
|
|
there is no standard display density. At present there is not a
|
|
method to select the display's physical size, which would allow
|
|
U-Boot to calculate the correct font size.
|
|
|
|
config CONSOLE_TRUETYPE_MAX_METRICS
|
|
int "TrueType maximum number of font / size combinations"
|
|
depends on CONSOLE_TRUETYPE
|
|
default 10 if EXPO
|
|
default 1
|
|
help
|
|
This sets the number of font / size combinations which can be used by
|
|
the console. For simple console use a single font is enough. When
|
|
boot menus are in use, this may need to be increased.
|
|
|
|
Note that a separate entry is needed for each font size, even if the
|
|
font itself is the same. This is because the entry caches various
|
|
font metrics which are expensive to regenerate each time the font
|
|
size changes.
|
|
|
|
config SYS_WHITE_ON_BLACK
|
|
bool "Display console as white on a black background"
|
|
default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || ARCH_TEGRA || X86 || ARCH_SUNXI
|
|
help
|
|
Normally the display is black on a white background, Enable this
|
|
option to invert this, i.e. white on a black background. This can be
|
|
better in low-light situations or to reduce eye strain in some
|
|
cases.
|
|
|
|
config NO_FB_CLEAR
|
|
bool "Skip framebuffer clear"
|
|
help
|
|
If firmware (whatever loads u-boot) has already put a splash image
|
|
on screen, you might want to preserve it until whatever u-boot
|
|
loads takes over the screen. This, for example, can be used to
|
|
keep splash image on screen until grub graphical boot menu starts.
|
|
|
|
config PANEL
|
|
bool "Enable panel uclass support"
|
|
default y
|
|
help
|
|
This provides panel uclass driver that enables basic panel support.
|
|
|
|
config SIMPLE_PANEL
|
|
bool "Enable simple panel support"
|
|
depends on PANEL && BACKLIGHT && DM_GPIO
|
|
default y
|
|
help
|
|
This turns on a simple panel driver that enables a compatible
|
|
video panel.
|
|
|
|
config PANEL_HX8238D
|
|
bool "Enable Himax HX-8238D LCD driver"
|
|
depends on PANEL
|
|
help
|
|
Support for HX-8238D LCD Panel
|
|
The HX8238-D is a single chip controller and driver LSI that
|
|
integrates the power circuit.
|
|
It can drive a maximum 960x240 dot graphics on a-TFT panel
|
|
displays in 16M colors with dithering.
|
|
|
|
source "drivers/video/fonts/Kconfig"
|
|
|
|
config VIDCONSOLE_AS_LCD
|
|
bool "Use 'vidconsole' when CONFIG_VIDCONSOLE_AS_NAME string is seen in stdout"
|
|
help
|
|
This is a work-around for boards which have 'lcd' or 'vga' in their
|
|
stdout environment variable, but have moved to use driver model for
|
|
video. In this case the console will no-longer work. While it is
|
|
possible to update the environment, the breakage may be confusing for
|
|
users. This option will be removed around the end of 2020.
|
|
|
|
config VIDCONSOLE_AS_NAME
|
|
string "Use 'vidconsole' when string defined here is seen in stdout"
|
|
depends on VIDCONSOLE_AS_LCD
|
|
default "lcd" if LCD || TEGRA_COMMON
|
|
default "vga" if !LCD
|
|
help
|
|
This is a work-around for boards which have 'lcd' or 'vga' in their
|
|
stdout environment variable, but have moved to use driver model for
|
|
video. In this case the console will no-longer work. While it is
|
|
possible to update the environment, the breakage may be confusing for
|
|
users. This option will be removed around the end of 2020.
|
|
|
|
config VIDEO_COREBOOT
|
|
bool "Enable coreboot framebuffer driver support"
|
|
depends on X86
|
|
help
|
|
Turn on this option to enable a framebuffer driver when U-Boot is
|
|
loaded by coreboot where the graphics device is configured by
|
|
coreboot already. This can in principle be used with any platform
|
|
that coreboot supports.
|
|
|
|
config VIDEO_EFI
|
|
bool "Enable EFI framebuffer driver support"
|
|
depends on EFI_STUB || EFI_APP
|
|
help
|
|
Turn on this option to enable a framebuffeer driver when U-Boot is
|
|
loaded as a payload (see README.u-boot_on_efi) by an EFI BIOS where
|
|
the graphics device is configured by the EFI BIOS already. This can
|
|
in principle be used with any platform that has an EFI BIOS.
|
|
|
|
config VIDEO_VESA
|
|
bool "Enable VESA video driver support"
|
|
help
|
|
Turn on this option to enable a very simple driver which uses vesa
|
|
to discover the video mode and then provides a frame buffer for use
|
|
by U-Boot. This can in principle be used with any platform that
|
|
supports PCI and video cards that support VESA BIOS Extension (VBE).
|
|
|
|
config FRAMEBUFFER_SET_VESA_MODE
|
|
bool "Set framebuffer graphics resolution"
|
|
depends on VIDEO_VESA || VIDEO_BROADWELL_IGD
|
|
help
|
|
Set VESA/native framebuffer mode (needed for bootsplash and graphical
|
|
framebuffer console)
|
|
|
|
choice
|
|
prompt "framebuffer graphics resolution"
|
|
default FRAMEBUFFER_VESA_MODE_118
|
|
depends on FRAMEBUFFER_SET_VESA_MODE
|
|
help
|
|
This option sets the resolution used for the U-Boot framebuffer (and
|
|
bootsplash screen).
|
|
|
|
config FRAMEBUFFER_VESA_MODE_100
|
|
bool "640x400 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_101
|
|
bool "640x480 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_102
|
|
bool "800x600 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_103
|
|
bool "800x600 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_104
|
|
bool "1024x768 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_105
|
|
bool "1024x768 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_106
|
|
bool "1280x1024 16-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_107
|
|
bool "1280x1024 256-color"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_108
|
|
bool "80x60 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_109
|
|
bool "132x25 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10A
|
|
bool "132x43 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10B
|
|
bool "132x50 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10C
|
|
bool "132x60 text"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10D
|
|
bool "320x200 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10E
|
|
bool "320x200 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_10F
|
|
bool "320x200 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_110
|
|
bool "640x480 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_111
|
|
bool "640x480 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_112
|
|
bool "640x480 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_113
|
|
bool "800x600 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_114
|
|
bool "800x600 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_115
|
|
bool "800x600 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_116
|
|
bool "1024x768 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_117
|
|
bool "1024x768 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_118
|
|
bool "1024x768 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_119
|
|
bool "1280x1024 32k-color (1:5:5:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_11A
|
|
bool "1280x1024 64k-color (5:6:5)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_11B
|
|
bool "1280x1024 16.8M-color (8:8:8)"
|
|
|
|
config FRAMEBUFFER_VESA_MODE_USER
|
|
bool "Manually select VESA mode"
|
|
|
|
endchoice
|
|
|
|
# Map the config names to an integer (KB).
|
|
config FRAMEBUFFER_VESA_MODE
|
|
prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER
|
|
hex
|
|
default 0x100 if FRAMEBUFFER_VESA_MODE_100
|
|
default 0x101 if FRAMEBUFFER_VESA_MODE_101
|
|
default 0x102 if FRAMEBUFFER_VESA_MODE_102
|
|
default 0x103 if FRAMEBUFFER_VESA_MODE_103
|
|
default 0x104 if FRAMEBUFFER_VESA_MODE_104
|
|
default 0x105 if FRAMEBUFFER_VESA_MODE_105
|
|
default 0x106 if FRAMEBUFFER_VESA_MODE_106
|
|
default 0x107 if FRAMEBUFFER_VESA_MODE_107
|
|
default 0x108 if FRAMEBUFFER_VESA_MODE_108
|
|
default 0x109 if FRAMEBUFFER_VESA_MODE_109
|
|
default 0x10A if FRAMEBUFFER_VESA_MODE_10A
|
|
default 0x10B if FRAMEBUFFER_VESA_MODE_10B
|
|
default 0x10C if FRAMEBUFFER_VESA_MODE_10C
|
|
default 0x10D if FRAMEBUFFER_VESA_MODE_10D
|
|
default 0x10E if FRAMEBUFFER_VESA_MODE_10E
|
|
default 0x10F if FRAMEBUFFER_VESA_MODE_10F
|
|
default 0x110 if FRAMEBUFFER_VESA_MODE_110
|
|
default 0x111 if FRAMEBUFFER_VESA_MODE_111
|
|
default 0x112 if FRAMEBUFFER_VESA_MODE_112
|
|
default 0x113 if FRAMEBUFFER_VESA_MODE_113
|
|
default 0x114 if FRAMEBUFFER_VESA_MODE_114
|
|
default 0x115 if FRAMEBUFFER_VESA_MODE_115
|
|
default 0x116 if FRAMEBUFFER_VESA_MODE_116
|
|
default 0x117 if FRAMEBUFFER_VESA_MODE_117
|
|
default 0x118 if FRAMEBUFFER_VESA_MODE_118
|
|
default 0x119 if FRAMEBUFFER_VESA_MODE_119
|
|
default 0x11A if FRAMEBUFFER_VESA_MODE_11A
|
|
default 0x11B if FRAMEBUFFER_VESA_MODE_11B
|
|
default 0x117 if FRAMEBUFFER_VESA_MODE_USER
|
|
|
|
config VIDEO_LCD_ANX9804
|
|
bool "ANX9804 bridge chip"
|
|
---help---
|
|
Support for the ANX9804 bridge chip, which can take pixel data coming
|
|
from a parallel LCD interface and translate it on the fy into a DP
|
|
interface for driving eDP TFT displays. It uses I2C for configuration.
|
|
|
|
config ATMEL_LCD
|
|
bool "Atmel LCD panel support"
|
|
depends on ARCH_AT91
|
|
|
|
config ATMEL_LCD_BGR555
|
|
bool "Display in BGR555 mode"
|
|
help
|
|
Use the BGR555 output mode. Otherwise RGB565 is used.
|
|
|
|
config VIDEO_BCM2835
|
|
bool "Display support for BCM2835"
|
|
help
|
|
The graphics processor already sets up the display so this driver
|
|
simply checks the resolution and then sets up the frame buffer with
|
|
that same resolution (or as near as possible) and 32bpp depth, so
|
|
that U-Boot can access it with full colour depth.
|
|
|
|
config VIDEO_LCD_ORISETECH_OTM8009A
|
|
bool "OTM8009A DSI LCD panel support"
|
|
select VIDEO_MIPI_DSI
|
|
help
|
|
Say Y here if you want to enable support for Orise Technology
|
|
otm8009a 480x800 dsi 2dl panel.
|
|
|
|
config VIDEO_LCD_RAYDIUM_RM68200
|
|
bool "RM68200 DSI LCD panel support"
|
|
select VIDEO_MIPI_DSI
|
|
help
|
|
Say Y here if you want to enable support for Raydium RM68200
|
|
720x1280 DSI video mode panel.
|
|
|
|
config VIDEO_LCD_SSD2828
|
|
bool "SSD2828 bridge chip"
|
|
---help---
|
|
Support for the SSD2828 bridge chip, which can take pixel data coming
|
|
from a parallel LCD interface and translate it on the fly into MIPI DSI
|
|
interface for driving a MIPI compatible LCD panel. It uses SPI for
|
|
configuration.
|
|
|
|
config VIDEO_LCD_SSD2828_TX_CLK
|
|
int "SSD2828 TX_CLK frequency (in MHz)"
|
|
depends on VIDEO_LCD_SSD2828
|
|
default 0
|
|
---help---
|
|
The frequency of the crystal, which is clocking SSD2828. It may be
|
|
anything in the 8MHz-30MHz range and the exact value should be
|
|
retrieved from the board schematics. Or in the case of Allwinner
|
|
hardware, it can be usually found as 'lcd_xtal_freq' variable in
|
|
FEX files. It can be also set to 0 for selecting PCLK from the
|
|
parallel LCD interface instead of TX_CLK as the PLL clock source.
|
|
|
|
config VIDEO_LCD_SSD2828_RESET
|
|
string "RESET pin of SSD2828"
|
|
depends on VIDEO_LCD_SSD2828
|
|
default ""
|
|
---help---
|
|
The reset pin of SSD2828 chip. This takes a string in the format
|
|
understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_TDO_TL070WSH30
|
|
bool "TDO TL070WSH30 DSI LCD panel support"
|
|
select VIDEO_MIPI_DSI
|
|
help
|
|
Say Y here if you want to enable support for TDO TL070WSH30
|
|
1024x600 DSI video mode panel.
|
|
|
|
config VIDEO_LCD_HITACHI_TX18D42VM
|
|
bool "Hitachi tx18d42vm LVDS LCD panel support"
|
|
---help---
|
|
Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a
|
|
lcd controller which needs to be initialized over SPI, once that is
|
|
done they work like a regular LVDS panel.
|
|
|
|
config VIDEO_LCD_SPI_CS
|
|
string "SPI CS pin for LCD related config job"
|
|
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. The option takes a string in the format
|
|
understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_SPI_SCLK
|
|
string "SPI SCLK pin for LCD related config job"
|
|
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. The option takes a string in the format
|
|
understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_SPI_MOSI
|
|
string "SPI MOSI pin for LCD related config job"
|
|
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. The option takes a string in the format
|
|
understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_SPI_MISO
|
|
string "SPI MISO pin for LCD related config job (optional)"
|
|
depends on VIDEO_LCD_SSD2828
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. If wired up, this pin may provide additional
|
|
useful functionality. Such as bi-directional communication with the
|
|
hardware and LCD panel id retrieval (if the panel can report it). The
|
|
option takes a string in the format understood by 'sunxi_name_to_gpio'
|
|
function, e.g. PH1 for pin 1 of port H.
|
|
|
|
source "drivers/video/meson/Kconfig"
|
|
|
|
config VIDEO_MVEBU
|
|
bool "Armada XP LCD controller"
|
|
---help---
|
|
Support for the LCD controller integrated in the Marvell
|
|
Armada XP SoC.
|
|
|
|
config VIDEO_OMAP3
|
|
bool "Enable OMAP3+ DSS Support"
|
|
depends on ARCH_OMAP2PLUS
|
|
help
|
|
This enables the Display subsystem (DSS) on OMAP3+ boards.
|
|
|
|
config I2C_EDID
|
|
bool "Enable EDID library"
|
|
help
|
|
This enables library for accessing EDID data from an LCD panel.
|
|
|
|
config DISPLAY
|
|
bool "Enable Display support"
|
|
depends on DM
|
|
select I2C_EDID
|
|
help
|
|
This supports drivers that provide a display, such as eDP (Embedded
|
|
DisplayPort) and HDMI (High Definition Multimedia Interface).
|
|
The devices provide a simple interface to start up the display,
|
|
read display information and enable it.
|
|
|
|
config NXP_TDA19988
|
|
bool "Enable NXP TDA19988 support"
|
|
depends on DISPLAY
|
|
help
|
|
This enables support for the NXP TDA19988 HDMI encoder. This encoder
|
|
will convert RGB data streams into HDMI-encoded signals.
|
|
|
|
config ATMEL_HLCD
|
|
bool "Enable ATMEL video support using HLCDC"
|
|
help
|
|
HLCDC supports video output to an attached LCD panel.
|
|
|
|
source "drivers/video/exynos/Kconfig"
|
|
|
|
config LOGICORE_DP_TX
|
|
bool "Enable Logicore DP TX driver"
|
|
depends on DISPLAY
|
|
help
|
|
Enable the driver for the transmitter part of the Xilinx LogiCORE
|
|
DisplayPort, a IP core for Xilinx FPGAs that implements a DisplayPort
|
|
video interface as defined by VESA DisplayPort v1.2.
|
|
|
|
Note that this is a pure transmitter device, and has no display
|
|
capabilities by itself.
|
|
|
|
config VIDEO_BROADWELL_IGD
|
|
bool "Enable Intel Broadwell integrated graphics device"
|
|
depends on X86
|
|
help
|
|
This enables support for integrated graphics on Intel broadwell
|
|
devices. Initialisation is mostly performed by a VGA boot ROM, with
|
|
some setup handled by U-Boot itself. The graphics adaptor works as
|
|
a VESA device and supports LCD panels, eDP and LVDS outputs.
|
|
Configuration of most aspects of device operation is performed using
|
|
a special tool which configures the VGA ROM, but the graphics
|
|
resolution can be selected in U-Boot.
|
|
|
|
config VIDEO_IVYBRIDGE_IGD
|
|
bool "Enable Intel Ivybridge integration graphics support"
|
|
depends on X86
|
|
help
|
|
This enables support for integrated graphics on Intel ivybridge
|
|
devices. Initialisation is mostly performed by a VGA boot ROM, with
|
|
some setup handled by U-Boot itself. The graphics adaptor works as
|
|
a VESA device and supports LCD panels, eDP and LVDS outputs.
|
|
Configuration of most aspects of device operation is performed using
|
|
a special tool which configures the VGA ROM, but the graphics
|
|
resolution can be selected in U-Boot.
|
|
|
|
source "drivers/video/rockchip/Kconfig"
|
|
|
|
config VIDEO_ARM_MALIDP
|
|
bool "Enable Arm Mali Display Processor support"
|
|
depends on OF_CONTROL
|
|
select VEXPRESS_CLK
|
|
help
|
|
This enables support for Arm Ltd Mali Display Processors from
|
|
the DP500, DP550 and DP650 family.
|
|
|
|
config VIDEO_SANDBOX_SDL
|
|
bool "Enable sandbox video console using SDL"
|
|
depends on SANDBOX
|
|
help
|
|
When using sandbox you can enable an emulated LCD display which
|
|
appears as an SDL (Simple DirectMedia Layer) window. This is a
|
|
console device and can display stdout output. Within U-Boot is is
|
|
a normal bitmap display and can display images as well as text.
|
|
|
|
source "drivers/video/stm32/Kconfig"
|
|
|
|
config VIDEO_TEGRA20
|
|
bool "Enable LCD support on Tegra20"
|
|
depends on OF_CONTROL
|
|
help
|
|
Tegra20 supports video output to an attached LCD panel as well as
|
|
other options such as HDMI. Only the LCD is supported in U-Boot.
|
|
This option enables this support which can be used on devices which
|
|
have an LCD display connected.
|
|
|
|
config VIDEO_TEGRA124
|
|
bool "Enable video support on Tegra124"
|
|
help
|
|
Tegra124 supports many video output options including eDP and
|
|
HDMI. At present only eDP is supported by U-Boot. This option
|
|
enables this support which can be used on devices which
|
|
have an eDP display connected.
|
|
|
|
source "drivers/video/bridge/Kconfig"
|
|
|
|
source "drivers/video/imx/Kconfig"
|
|
|
|
config VIDEO_MXS
|
|
bool "Enable video support on i.MX28/i.MX6UL/i.MX7 SoCs"
|
|
help
|
|
Enable framebuffer driver for i.MX28/i.MX6UL/i.MX7 processors
|
|
|
|
config VIDEO_NX
|
|
bool "Enable video support on Nexell SoC"
|
|
depends on ARCH_S5P6818 || ARCH_S5P4418
|
|
help
|
|
Nexell SoC supports many video output options including eDP and
|
|
HDMI. This option enables this support which can be used on devices
|
|
which have an eDP display connected.
|
|
|
|
config VIDEO_SEPS525
|
|
bool "Enable video support for Seps525"
|
|
depends on DM_GPIO
|
|
help
|
|
Enable support for the Syncoam PM-OLED display driver (RGB 160x128).
|
|
Currently driver is supporting only SPI interface.
|
|
|
|
config VIDEO_ZYNQMP_DPSUB
|
|
bool "Enable video support for ZynqMP Display Port"
|
|
depends on ZYNQMP_POWER_DOMAIN
|
|
help
|
|
Enable support for Xilinx ZynqMP Display Port. Currently this file
|
|
is used as placeholder for driver. The main reason is to record
|
|
compatible string and calling power domain driver.
|
|
|
|
source "drivers/video/nexell/Kconfig"
|
|
|
|
config CONSOLE_SCROLL_LINES
|
|
int "Number of lines to scroll the console by"
|
|
default 1
|
|
help
|
|
When the console need to be scrolled, this is the number of
|
|
lines to scroll by. It defaults to 1. Increasing this makes the
|
|
console jump but can help speed up operation when scrolling
|
|
is slow.
|
|
|
|
config VIDEO_DW_HDMI
|
|
bool
|
|
help
|
|
Enables the common driver code for the Designware HDMI TX
|
|
block found in SoCs from various vendors.
|
|
As this does not provide any functionality by itself (but
|
|
rather requires a SoC-specific glue driver to call it), it
|
|
can not be enabled from the configuration menu.
|
|
|
|
config VIDEO_DSI_HOST_SANDBOX
|
|
bool "Enable sandbox for dsi host"
|
|
depends on SANDBOX
|
|
select VIDEO_MIPI_DSI
|
|
help
|
|
Enable support for sandbox dsi host device used for testing
|
|
purposes.
|
|
Display Serial Interface (DSI) defines a serial bus and
|
|
a communication protocol between the host and the device
|
|
(panel, bridge).
|
|
|
|
config VIDEO_DW_MIPI_DSI
|
|
bool
|
|
select VIDEO_MIPI_DSI
|
|
help
|
|
Enables the common driver code for the Synopsis Designware
|
|
MIPI DSI block found in SoCs from various vendors.
|
|
As this does not provide any functionality by itself (but
|
|
rather requires a SoC-specific glue driver to call it), it
|
|
can not be enabled from the configuration menu.
|
|
|
|
config VIDEO_SIMPLE
|
|
bool "Simple display driver for preconfigured display"
|
|
help
|
|
Enables a simple generic display driver which utilizes the
|
|
simple-framebuffer devicetree bindings.
|
|
|
|
This driver assumes that the display hardware has been initialized
|
|
before u-boot starts, and u-boot will simply render to the pre-
|
|
allocated frame buffer surface.
|
|
|
|
config VIDEO_DT_SIMPLEFB
|
|
bool "Enable SimpleFB support for passing framebuffer to OS"
|
|
help
|
|
Enables the code to pass the framebuffer to the kernel as a
|
|
simple framebuffer in the device tree.
|
|
The video output is initialized by U-Boot, and kept by the
|
|
kernel.
|
|
|
|
config VIDEO_MCDE_SIMPLE
|
|
bool "Simple driver for ST-Ericsson MCDE with preconfigured display"
|
|
help
|
|
Enables a simple display driver for ST-Ericsson MCDE
|
|
(Multichannel Display Engine), which reads the configuration from
|
|
the MCDE registers.
|
|
|
|
This driver assumes that the display hardware has been initialized
|
|
before u-boot starts, and u-boot will simply render to the pre-
|
|
allocated frame buffer surface.
|
|
|
|
config OSD
|
|
bool "Enable OSD support"
|
|
depends on DM
|
|
help
|
|
This supports drivers that provide a OSD (on-screen display), which
|
|
is a (usually text-oriented) graphics buffer to show information on
|
|
a display.
|
|
|
|
config SANDBOX_OSD
|
|
bool "Enable sandbox OSD"
|
|
depends on OSD
|
|
help
|
|
Enable support for sandbox OSD device used for testing purposes.
|
|
|
|
config IHS_VIDEO_OUT
|
|
bool "Enable IHS video out driver"
|
|
depends on OSD
|
|
help
|
|
Enable support for the gdsys Integrated Hardware Systems (IHS) video
|
|
out On-screen Display (OSD) used on gdsys FPGAs to control dynamic
|
|
textual overlays of the display outputs.
|
|
|
|
config SPLASH_SCREEN
|
|
bool "Show a splash-screen image"
|
|
help
|
|
If this option is set, the environment is checked for a variable
|
|
"splashimage". If found, the usual display of logo, copyright and
|
|
system information on the LCD is suppressed and the BMP image at the
|
|
address specified in "splashimage" is loaded instead. The console is
|
|
redirected to the "nulldev", too. This allows for a "silent" boot
|
|
where a splash screen is loaded very quickly after power-on.
|
|
|
|
The splash_screen_prepare() function is a weak function defined in
|
|
common/splash.c. It is called as part of the splash screen display
|
|
sequence. It gives the board an opportunity to prepare the splash
|
|
image data before it is processed and sent to the frame buffer by
|
|
U-Boot. Define your own version to use this feature.
|
|
|
|
if SPLASH_SCREEN
|
|
|
|
config SPLASH_SCREEN_ALIGN
|
|
bool "Allow positioning the splash image anywhere on the display"
|
|
help
|
|
If this option is set the splash image can be freely positioned
|
|
on the screen. Environment variable "splashpos" specifies the
|
|
position as "x,y". If a positive number is given it is used as
|
|
number of pixel from left/top. If a negative number is given it
|
|
is used as number of pixel from right/bottom. You can also
|
|
specify 'm' for centering the image.
|
|
|
|
Example:
|
|
setenv splashpos m,m
|
|
=> image at center of screen
|
|
|
|
setenv splashpos 30,20
|
|
=> image at x = 30 and y = 20
|
|
|
|
setenv splashpos -10,m
|
|
=> vertically centered image
|
|
at x = dspWidth - bmpWidth - 9
|
|
|
|
config HIDE_LOGO_VERSION
|
|
bool "Hide the version information on the splash screen"
|
|
help
|
|
Normally the U-Boot version string is shown on the display when the
|
|
splash screen is enabled. This information is not otherwise visible
|
|
since video starts up after U-Boot has displayed the initial banner.
|
|
|
|
Enable this option to hide this information.
|
|
|
|
config SPLASH_SOURCE
|
|
bool "Control the source of the splash image"
|
|
help
|
|
Use the splash_source.c library. This library provides facilities to
|
|
declare board specific splash image locations, routines for loading
|
|
splash image from supported locations, and a way of controlling the
|
|
selected splash location using the "splashsource" environment
|
|
variable.
|
|
|
|
This CONFIG works as follows:
|
|
|
|
- If splashsource is set to a supported location name as defined by
|
|
board code, use that splash location.
|
|
- If splashsource is undefined, use the first splash location as
|
|
default.
|
|
- If splashsource is set to an unsupported value, do not load a splash
|
|
screen.
|
|
|
|
A splash source location can describe either storage with raw data, a
|
|
storage formatted with a file system or a FIT image. In case of a
|
|
filesystem, the splash screen data is loaded as a file. The name of
|
|
the splash screen file can be controlled with the environment variable
|
|
"splashfile".
|
|
|
|
To enable loading the splash image from a FIT image, CONFIG_FIT must
|
|
be enabled. The FIT image has to start at the 'offset' field address
|
|
in the selected splash location. The name of splash image within the
|
|
FIT shall be specified by the environment variable "splashfile".
|
|
|
|
In case the environment variable "splashfile" is not defined the
|
|
default name 'splash.bmp' will be used.
|
|
|
|
endif # SPLASH_SCREEN
|
|
|
|
config VIDEO_BMP_GZIP
|
|
bool "Gzip compressed BMP image support"
|
|
depends on CMD_BMP || SPLASH_SCREEN
|
|
help
|
|
If this option is set, additionally to standard BMP
|
|
images, gzipped BMP images can be displayed via the
|
|
splashscreen support or the bmp command.
|
|
|
|
config VIDEO_LOGO_MAX_SIZE
|
|
hex "Maximum size of the bitmap logo in bytes"
|
|
default 0x100000
|
|
help
|
|
Sets the maximum uncompressed size of the logo. This is needed when
|
|
decompressing a BMP file using the gzip algorithm, since it cannot
|
|
read the size from the bitmap header.
|
|
|
|
config VIDEO_BMP_RLE8
|
|
bool "Run length encoded BMP image (RLE8) support"
|
|
help
|
|
If this option is set, the 8-bit RLE compressed BMP images
|
|
is supported.
|
|
|
|
config BMP_16BPP
|
|
bool "16-bit-per-pixel BMP image support"
|
|
help
|
|
Support display of bitmaps file with 16-bit-per-pixel
|
|
|
|
config BMP_24BPP
|
|
bool "24-bit-per-pixel BMP image support"
|
|
help
|
|
Support display of bitmaps file with 24-bit-per-pixel.
|
|
|
|
config BMP_32BPP
|
|
bool "32-bit-per-pixel BMP image support"
|
|
help
|
|
Support display of bitmaps file with 32-bit-per-pixel.
|
|
|
|
endif # VIDEO
|
|
|
|
endmenu
|