mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-07 11:52:47 +00:00
0fd3d91152
Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
400 lines
11 KiB
C
400 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* NVIDIA Tegra SPI controller (T114 and later)
|
|
*
|
|
* Copyright (c) 2010-2013 NVIDIA Corporation
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <time.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch-tegra/clk_rst.h>
|
|
#include <spi.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include "tegra_spi.h"
|
|
|
|
/* COMMAND1 */
|
|
#define SPI_CMD1_GO BIT(31)
|
|
#define SPI_CMD1_M_S BIT(30)
|
|
#define SPI_CMD1_MODE_MASK GENMASK(1, 0)
|
|
#define SPI_CMD1_MODE_SHIFT 28
|
|
#define SPI_CMD1_CS_SEL_MASK GENMASK(1, 0)
|
|
#define SPI_CMD1_CS_SEL_SHIFT 26
|
|
#define SPI_CMD1_CS_POL_INACTIVE3 BIT(25)
|
|
#define SPI_CMD1_CS_POL_INACTIVE2 BIT(24)
|
|
#define SPI_CMD1_CS_POL_INACTIVE1 BIT(23)
|
|
#define SPI_CMD1_CS_POL_INACTIVE0 BIT(22)
|
|
#define SPI_CMD1_CS_SW_HW BIT(21)
|
|
#define SPI_CMD1_CS_SW_VAL BIT(20)
|
|
#define SPI_CMD1_IDLE_SDA_MASK GENMASK(1, 0)
|
|
#define SPI_CMD1_IDLE_SDA_SHIFT 18
|
|
#define SPI_CMD1_BIDIR BIT(17)
|
|
#define SPI_CMD1_LSBI_FE BIT(16)
|
|
#define SPI_CMD1_LSBY_FE BIT(15)
|
|
#define SPI_CMD1_BOTH_EN_BIT BIT(14)
|
|
#define SPI_CMD1_BOTH_EN_BYTE BIT(13)
|
|
#define SPI_CMD1_RX_EN BIT(12)
|
|
#define SPI_CMD1_TX_EN BIT(11)
|
|
#define SPI_CMD1_PACKED BIT(5)
|
|
#define SPI_CMD1_BIT_LEN_MASK GENMASK(4, 0)
|
|
#define SPI_CMD1_BIT_LEN_SHIFT 0
|
|
|
|
/* COMMAND2 */
|
|
#define SPI_CMD2_TX_CLK_TAP_DELAY BIT(6)
|
|
#define SPI_CMD2_TX_CLK_TAP_DELAY_MASK GENMASK(11, 6)
|
|
#define SPI_CMD2_RX_CLK_TAP_DELAY BIT(0)
|
|
#define SPI_CMD2_RX_CLK_TAP_DELAY_MASK GENMASK(5, 0)
|
|
|
|
/* TRANSFER STATUS */
|
|
#define SPI_XFER_STS_RDY BIT(30)
|
|
|
|
/* FIFO STATUS */
|
|
#define SPI_FIFO_STS_CS_INACTIVE BIT(31)
|
|
#define SPI_FIFO_STS_FRAME_END BIT(30)
|
|
#define SPI_FIFO_STS_RX_FIFO_FLUSH BIT(15)
|
|
#define SPI_FIFO_STS_TX_FIFO_FLUSH BIT(14)
|
|
#define SPI_FIFO_STS_ERR BIT(8)
|
|
#define SPI_FIFO_STS_TX_FIFO_OVF BIT(7)
|
|
#define SPI_FIFO_STS_TX_FIFO_UNR BIT(6)
|
|
#define SPI_FIFO_STS_RX_FIFO_OVF BIT(5)
|
|
#define SPI_FIFO_STS_RX_FIFO_UNR BIT(4)
|
|
#define SPI_FIFO_STS_TX_FIFO_FULL BIT(3)
|
|
#define SPI_FIFO_STS_TX_FIFO_EMPTY BIT(2)
|
|
#define SPI_FIFO_STS_RX_FIFO_FULL BIT(1)
|
|
#define SPI_FIFO_STS_RX_FIFO_EMPTY BIT(0)
|
|
|
|
#define SPI_TIMEOUT 1000
|
|
#define TEGRA_SPI_MAX_FREQ 52000000
|
|
|
|
struct spi_regs {
|
|
u32 command1; /* 000:SPI_COMMAND1 register */
|
|
u32 command2; /* 004:SPI_COMMAND2 register */
|
|
u32 timing1; /* 008:SPI_CS_TIM1 register */
|
|
u32 timing2; /* 00c:SPI_CS_TIM2 register */
|
|
u32 xfer_status;/* 010:SPI_TRANS_STATUS register */
|
|
u32 fifo_status;/* 014:SPI_FIFO_STATUS register */
|
|
u32 tx_data; /* 018:SPI_TX_DATA register */
|
|
u32 rx_data; /* 01c:SPI_RX_DATA register */
|
|
u32 dma_ctl; /* 020:SPI_DMA_CTL register */
|
|
u32 dma_blk; /* 024:SPI_DMA_BLK register */
|
|
u32 rsvd[56]; /* 028-107 reserved */
|
|
u32 tx_fifo; /* 108:SPI_FIFO1 register */
|
|
u32 rsvd2[31]; /* 10c-187 reserved */
|
|
u32 rx_fifo; /* 188:SPI_FIFO2 register */
|
|
u32 spare_ctl; /* 18c:SPI_SPARE_CTRL register */
|
|
};
|
|
|
|
struct tegra114_spi_priv {
|
|
struct spi_regs *regs;
|
|
unsigned int freq;
|
|
unsigned int mode;
|
|
int periph_id;
|
|
int valid;
|
|
int last_transaction_us;
|
|
};
|
|
|
|
static int tegra114_spi_of_to_plat(struct udevice *bus)
|
|
{
|
|
struct tegra_spi_plat *plat = dev_get_plat(bus);
|
|
|
|
plat->base = dev_read_addr(bus);
|
|
plat->periph_id = clock_decode_periph_id(bus);
|
|
|
|
if (plat->periph_id == PERIPH_ID_NONE) {
|
|
debug("%s: could not decode periph id %d\n", __func__,
|
|
plat->periph_id);
|
|
return -FDT_ERR_NOTFOUND;
|
|
}
|
|
|
|
/* Use 500KHz as a suitable default */
|
|
plat->frequency = dev_read_u32_default(bus, "spi-max-frequency",
|
|
500000);
|
|
plat->deactivate_delay_us = dev_read_u32_default(bus,
|
|
"spi-deactivate-delay", 0);
|
|
debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n",
|
|
__func__, plat->base, plat->periph_id, plat->frequency,
|
|
plat->deactivate_delay_us);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra114_spi_probe(struct udevice *bus)
|
|
{
|
|
struct tegra_spi_plat *plat = dev_get_plat(bus);
|
|
struct tegra114_spi_priv *priv = dev_get_priv(bus);
|
|
struct spi_regs *regs;
|
|
ulong rate;
|
|
|
|
priv->regs = (struct spi_regs *)plat->base;
|
|
regs = priv->regs;
|
|
|
|
priv->last_transaction_us = timer_get_us();
|
|
priv->freq = plat->frequency;
|
|
priv->periph_id = plat->periph_id;
|
|
|
|
/*
|
|
* Change SPI clock to correct frequency, PLLP_OUT0 source, falling
|
|
* back to the oscillator if that is too fast.
|
|
*/
|
|
rate = clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
|
|
priv->freq);
|
|
if (rate > priv->freq + 100000) {
|
|
rate = clock_start_periph_pll(priv->periph_id, CLOCK_ID_OSC,
|
|
priv->freq);
|
|
if (rate != priv->freq) {
|
|
printf("Warning: SPI '%s' requested clock %u, actual clock %lu\n",
|
|
bus->name, priv->freq, rate);
|
|
}
|
|
}
|
|
udelay(plat->deactivate_delay_us);
|
|
|
|
/* Clear stale status here */
|
|
setbits_le32(®s->fifo_status,
|
|
SPI_FIFO_STS_ERR |
|
|
SPI_FIFO_STS_TX_FIFO_OVF |
|
|
SPI_FIFO_STS_TX_FIFO_UNR |
|
|
SPI_FIFO_STS_RX_FIFO_OVF |
|
|
SPI_FIFO_STS_RX_FIFO_UNR |
|
|
SPI_FIFO_STS_TX_FIFO_FULL |
|
|
SPI_FIFO_STS_TX_FIFO_EMPTY |
|
|
SPI_FIFO_STS_RX_FIFO_FULL |
|
|
SPI_FIFO_STS_RX_FIFO_EMPTY);
|
|
debug("%s: FIFO STATUS = %08x\n", __func__, readl(®s->fifo_status));
|
|
|
|
setbits_le32(&priv->regs->command1, SPI_CMD1_M_S | SPI_CMD1_CS_SW_HW |
|
|
(priv->mode << SPI_CMD1_MODE_SHIFT) | SPI_CMD1_CS_SW_VAL);
|
|
debug("%s: COMMAND1 = %08x\n", __func__, readl(®s->command1));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Activate the CS by driving it LOW
|
|
*
|
|
* @param slave Pointer to spi_slave to which controller has to
|
|
* communicate with
|
|
*/
|
|
static void spi_cs_activate(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct tegra_spi_plat *pdata = dev_get_plat(bus);
|
|
struct tegra114_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
/* If it's too soon to do another transaction, wait */
|
|
if (pdata->deactivate_delay_us &&
|
|
priv->last_transaction_us) {
|
|
ulong delay_us; /* The delay completed so far */
|
|
delay_us = timer_get_us() - priv->last_transaction_us;
|
|
if (delay_us < pdata->deactivate_delay_us)
|
|
udelay(pdata->deactivate_delay_us - delay_us);
|
|
}
|
|
|
|
clrbits_le32(&priv->regs->command1, SPI_CMD1_CS_SW_VAL);
|
|
}
|
|
|
|
/**
|
|
* Deactivate the CS by driving it HIGH
|
|
*
|
|
* @param slave Pointer to spi_slave to which controller has to
|
|
* communicate with
|
|
*/
|
|
static void spi_cs_deactivate(struct udevice *dev)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct tegra_spi_plat *pdata = dev_get_plat(bus);
|
|
struct tegra114_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
setbits_le32(&priv->regs->command1, SPI_CMD1_CS_SW_VAL);
|
|
|
|
/* Remember time of this transaction so we can honour the bus delay */
|
|
if (pdata->deactivate_delay_us)
|
|
priv->last_transaction_us = timer_get_us();
|
|
|
|
debug("Deactivate CS, bus '%s'\n", bus->name);
|
|
}
|
|
|
|
static int tegra114_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *data_out, void *data_in,
|
|
unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct tegra114_spi_priv *priv = dev_get_priv(bus);
|
|
struct spi_regs *regs = priv->regs;
|
|
u32 reg, tmpdout, tmpdin = 0;
|
|
const u8 *dout = data_out;
|
|
u8 *din = data_in;
|
|
int num_bytes;
|
|
int ret;
|
|
|
|
debug("%s: slave %u:%u dout %p din %p bitlen %u\n",
|
|
__func__, dev_seq(bus), spi_chip_select(dev), dout, din, bitlen);
|
|
if (bitlen % 8)
|
|
return -1;
|
|
num_bytes = bitlen / 8;
|
|
|
|
ret = 0;
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
spi_cs_activate(dev);
|
|
|
|
/* clear all error status bits */
|
|
reg = readl(®s->fifo_status);
|
|
writel(reg, ®s->fifo_status);
|
|
|
|
clrsetbits_le32(®s->command1, SPI_CMD1_CS_SW_VAL,
|
|
SPI_CMD1_RX_EN | SPI_CMD1_TX_EN | SPI_CMD1_LSBY_FE |
|
|
(spi_chip_select(dev) << SPI_CMD1_CS_SEL_SHIFT));
|
|
|
|
/* set xfer size to 1 block (32 bits) */
|
|
writel(0, ®s->dma_blk);
|
|
|
|
/* handle data in 32-bit chunks */
|
|
while (num_bytes > 0) {
|
|
int bytes;
|
|
int tm, i;
|
|
|
|
tmpdout = 0;
|
|
bytes = (num_bytes > 4) ? 4 : num_bytes;
|
|
|
|
if (dout != NULL) {
|
|
for (i = 0; i < bytes; ++i)
|
|
tmpdout = (tmpdout << 8) | dout[i];
|
|
dout += bytes;
|
|
}
|
|
|
|
num_bytes -= bytes;
|
|
|
|
/* clear ready bit */
|
|
setbits_le32(®s->xfer_status, SPI_XFER_STS_RDY);
|
|
|
|
clrsetbits_le32(®s->command1,
|
|
SPI_CMD1_BIT_LEN_MASK << SPI_CMD1_BIT_LEN_SHIFT,
|
|
(bytes * 8 - 1) << SPI_CMD1_BIT_LEN_SHIFT);
|
|
writel(tmpdout, ®s->tx_fifo);
|
|
setbits_le32(®s->command1, SPI_CMD1_GO);
|
|
|
|
/*
|
|
* Wait for SPI transmit FIFO to empty, or to time out.
|
|
* The RX FIFO status will be read and cleared last
|
|
*/
|
|
for (tm = 0; tm < SPI_TIMEOUT; ++tm) {
|
|
u32 fifo_status, xfer_status;
|
|
|
|
xfer_status = readl(®s->xfer_status);
|
|
if (!(xfer_status & SPI_XFER_STS_RDY))
|
|
continue;
|
|
|
|
fifo_status = readl(®s->fifo_status);
|
|
if (fifo_status & SPI_FIFO_STS_ERR) {
|
|
debug("%s: got a fifo error: ", __func__);
|
|
if (fifo_status & SPI_FIFO_STS_TX_FIFO_OVF)
|
|
debug("tx FIFO overflow ");
|
|
if (fifo_status & SPI_FIFO_STS_TX_FIFO_UNR)
|
|
debug("tx FIFO underrun ");
|
|
if (fifo_status & SPI_FIFO_STS_RX_FIFO_OVF)
|
|
debug("rx FIFO overflow ");
|
|
if (fifo_status & SPI_FIFO_STS_RX_FIFO_UNR)
|
|
debug("rx FIFO underrun ");
|
|
if (fifo_status & SPI_FIFO_STS_TX_FIFO_FULL)
|
|
debug("tx FIFO full ");
|
|
if (fifo_status & SPI_FIFO_STS_TX_FIFO_EMPTY)
|
|
debug("tx FIFO empty ");
|
|
if (fifo_status & SPI_FIFO_STS_RX_FIFO_FULL)
|
|
debug("rx FIFO full ");
|
|
if (fifo_status & SPI_FIFO_STS_RX_FIFO_EMPTY)
|
|
debug("rx FIFO empty ");
|
|
debug("\n");
|
|
break;
|
|
}
|
|
|
|
if (!(fifo_status & SPI_FIFO_STS_RX_FIFO_EMPTY)) {
|
|
tmpdin = readl(®s->rx_fifo);
|
|
|
|
/* swap bytes read in */
|
|
if (din != NULL) {
|
|
for (i = bytes - 1; i >= 0; --i) {
|
|
din[i] = tmpdin & 0xff;
|
|
tmpdin >>= 8;
|
|
}
|
|
din += bytes;
|
|
}
|
|
|
|
/* We can exit when we've had both RX and TX */
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (tm >= SPI_TIMEOUT)
|
|
ret = tm;
|
|
|
|
/* clear ACK RDY, etc. bits */
|
|
writel(readl(®s->fifo_status), ®s->fifo_status);
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
spi_cs_deactivate(dev);
|
|
|
|
debug("%s: transfer ended. Value=%08x, fifo_status = %08x\n",
|
|
__func__, tmpdin, readl(®s->fifo_status));
|
|
|
|
if (ret) {
|
|
printf("%s: timeout during SPI transfer, tm %d\n",
|
|
__func__, ret);
|
|
return -1;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tegra114_spi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct tegra_spi_plat *plat = dev_get_plat(bus);
|
|
struct tegra114_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
if (speed > plat->frequency)
|
|
speed = plat->frequency;
|
|
priv->freq = speed;
|
|
debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra114_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct tegra114_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
priv->mode = mode;
|
|
debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops tegra114_spi_ops = {
|
|
.xfer = tegra114_spi_xfer,
|
|
.set_speed = tegra114_spi_set_speed,
|
|
.set_mode = tegra114_spi_set_mode,
|
|
/*
|
|
* cs_info is not needed, since we require all chip selects to be
|
|
* in the device tree explicitly
|
|
*/
|
|
};
|
|
|
|
static const struct udevice_id tegra114_spi_ids[] = {
|
|
{ .compatible = "nvidia,tegra114-spi" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(tegra114_spi) = {
|
|
.name = "tegra114_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = tegra114_spi_ids,
|
|
.ops = &tegra114_spi_ops,
|
|
.of_to_plat = tegra114_spi_of_to_plat,
|
|
.plat_auto = sizeof(struct tegra_spi_plat),
|
|
.priv_auto = sizeof(struct tegra114_spi_priv),
|
|
.probe = tegra114_spi_probe,
|
|
};
|