mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
8a8d24bdf1
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
237 lines
5.3 KiB
C
237 lines
5.3 KiB
C
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Microsemi SoCs spi driver
|
|
*
|
|
* Copyright (c) 2018 Microsemi Corporation
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
|
|
struct mscc_bb_priv {
|
|
void __iomem *regs;
|
|
u32 deactivate_delay_us;
|
|
bool cs_active; /* State flag as to whether CS is asserted */
|
|
int cs_num;
|
|
u32 svalue; /* Value to start transfer with */
|
|
u32 clk1; /* Clock value start */
|
|
u32 clk2; /* Clock value 2nd phase */
|
|
};
|
|
|
|
/* Delay 24 instructions for this particular application */
|
|
#define hold_time_delay() mscc_vcoreiii_nop_delay(3)
|
|
|
|
static int mscc_bb_spi_cs_activate(struct mscc_bb_priv *priv, int mode, int cs)
|
|
{
|
|
if (!priv->cs_active) {
|
|
int cpha = mode & SPI_CPHA;
|
|
u32 cs_value;
|
|
|
|
priv->cs_num = cs;
|
|
|
|
if (cpha) {
|
|
/* Initial clock starts SCK=1 */
|
|
priv->clk1 = ICPU_SW_MODE_SW_SPI_SCK;
|
|
priv->clk2 = 0;
|
|
} else {
|
|
/* Initial clock starts SCK=0 */
|
|
priv->clk1 = 0;
|
|
priv->clk2 = ICPU_SW_MODE_SW_SPI_SCK;
|
|
}
|
|
|
|
/* Enable bitbang, SCK_OE, SDO_OE */
|
|
priv->svalue = (ICPU_SW_MODE_SW_PIN_CTRL_MODE | /* Bitbang */
|
|
ICPU_SW_MODE_SW_SPI_SCK_OE | /* SCK_OE */
|
|
ICPU_SW_MODE_SW_SPI_SDO_OE); /* SDO OE */
|
|
|
|
/* Add CS */
|
|
if (cs >= 0) {
|
|
cs_value =
|
|
ICPU_SW_MODE_SW_SPI_CS_OE(BIT(cs)) |
|
|
ICPU_SW_MODE_SW_SPI_CS(BIT(cs));
|
|
} else {
|
|
cs_value = 0;
|
|
}
|
|
|
|
priv->svalue |= cs_value;
|
|
|
|
/* Enable the CS in HW, Initial clock value */
|
|
writel(priv->svalue | priv->clk2, priv->regs);
|
|
|
|
priv->cs_active = true;
|
|
debug("Activated CS%d\n", priv->cs_num);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mscc_bb_spi_cs_deactivate(struct mscc_bb_priv *priv, int deact_delay)
|
|
{
|
|
if (priv->cs_active) {
|
|
/* Keep driving the CLK to its current value while
|
|
* actively deselecting CS.
|
|
*/
|
|
u32 value = readl(priv->regs);
|
|
|
|
value &= ~ICPU_SW_MODE_SW_SPI_CS_M;
|
|
writel(value, priv->regs);
|
|
hold_time_delay();
|
|
|
|
/* Stop driving the clock, but keep CS with nCS == 1 */
|
|
value &= ~ICPU_SW_MODE_SW_SPI_SCK_OE;
|
|
writel(value, priv->regs);
|
|
|
|
/* Deselect hold time delay */
|
|
if (deact_delay)
|
|
udelay(deact_delay);
|
|
|
|
/* Drop everything */
|
|
writel(0, priv->regs);
|
|
|
|
priv->cs_active = false;
|
|
debug("Deactivated CS%d\n", priv->cs_num);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mscc_bb_spi_claim_bus(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int mscc_bb_spi_release_bus(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int mscc_bb_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct dm_spi_slave_plat *plat = dev_get_parent_plat(dev);
|
|
struct mscc_bb_priv *priv = dev_get_priv(bus);
|
|
u32 i, count;
|
|
const u8 *txd = dout;
|
|
u8 *rxd = din;
|
|
|
|
debug("spi_xfer: slave %s:%s cs%d mode %d, dout %p din %p bitlen %u\n",
|
|
dev->parent->name, dev->name, plat->cs, plat->mode, dout,
|
|
din, bitlen);
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
mscc_bb_spi_cs_activate(priv, plat->mode, plat->cs);
|
|
|
|
count = bitlen / 8;
|
|
for (i = 0; i < count; i++) {
|
|
u32 rx = 0, mask = 0x80, value;
|
|
|
|
while (mask) {
|
|
/* Initial condition: CLK is low. */
|
|
value = priv->svalue;
|
|
if (txd && txd[i] & mask)
|
|
value |= ICPU_SW_MODE_SW_SPI_SDO;
|
|
|
|
/* Drive data while taking CLK low. The device
|
|
* we're accessing will sample on the
|
|
* following rising edge and will output data
|
|
* on this edge for us to be sampled at the
|
|
* end of this loop.
|
|
*/
|
|
writel(value | priv->clk1, priv->regs);
|
|
|
|
/* Wait for t_setup. All devices do have a
|
|
* setup-time, so we always insert some delay
|
|
* here. Some devices have a very long
|
|
* setup-time, which can be adjusted by the
|
|
* user through vcoreiii_device->delay.
|
|
*/
|
|
hold_time_delay();
|
|
|
|
/* Drive the clock high. */
|
|
writel(value | priv->clk2, priv->regs);
|
|
|
|
/* Wait for t_hold. See comment about t_setup
|
|
* above.
|
|
*/
|
|
hold_time_delay();
|
|
|
|
/* We sample as close to the next falling edge
|
|
* as possible.
|
|
*/
|
|
value = readl(priv->regs);
|
|
if (value & ICPU_SW_MODE_SW_SPI_SDI)
|
|
rx |= mask;
|
|
mask >>= 1;
|
|
}
|
|
if (rxd) {
|
|
debug("Read 0x%02x\n", rx);
|
|
rxd[i] = (u8)rx;
|
|
}
|
|
debug("spi_xfer: byte %d/%d\n", i + 1, count);
|
|
}
|
|
|
|
debug("spi_xfer: done\n");
|
|
|
|
if (flags & SPI_XFER_END)
|
|
mscc_bb_spi_cs_deactivate(priv, priv->deactivate_delay_us);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mscc_bb_spi_set_speed(struct udevice *dev, unsigned int speed)
|
|
{
|
|
/* Accept any speed */
|
|
return 0;
|
|
}
|
|
|
|
int mscc_bb_spi_set_mode(struct udevice *dev, unsigned int mode)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops mscc_bb_ops = {
|
|
.claim_bus = mscc_bb_spi_claim_bus,
|
|
.release_bus = mscc_bb_spi_release_bus,
|
|
.xfer = mscc_bb_spi_xfer,
|
|
.set_speed = mscc_bb_spi_set_speed,
|
|
.set_mode = mscc_bb_spi_set_mode,
|
|
};
|
|
|
|
static const struct udevice_id mscc_bb_ids[] = {
|
|
{ .compatible = "mscc,luton-bb-spi" },
|
|
{ }
|
|
};
|
|
|
|
static int mscc_bb_spi_probe(struct udevice *bus)
|
|
{
|
|
struct mscc_bb_priv *priv = dev_get_priv(bus);
|
|
|
|
debug("%s: loaded, priv %p\n", __func__, priv);
|
|
|
|
priv->regs = (void __iomem *)dev_read_addr(bus);
|
|
|
|
priv->deactivate_delay_us =
|
|
dev_read_u32_default(bus, "spi-deactivate-delay", 0);
|
|
|
|
priv->cs_active = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_DRIVER(mscc_bb) = {
|
|
.name = "mscc_bb",
|
|
.id = UCLASS_SPI,
|
|
.of_match = mscc_bb_ids,
|
|
.ops = &mscc_bb_ops,
|
|
.priv_auto = sizeof(struct mscc_bb_priv),
|
|
.probe = mscc_bb_spi_probe,
|
|
};
|