mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
440 lines
11 KiB
C
440 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2018 Cisco Systems, Inc.
|
|
*
|
|
* Author: Thomas Fitzsimmons <fitzsim@fitzsim.org>
|
|
*/
|
|
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <command.h>
|
|
#include <config.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <time.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define SPBR_MIN 8
|
|
#define BITS_PER_WORD 8
|
|
|
|
#define NUM_TXRAM 32
|
|
#define NUM_RXRAM 32
|
|
#define NUM_CDRAM 16
|
|
|
|
/* hif_mspi register structure. */
|
|
struct bcmstb_hif_mspi_regs {
|
|
u32 spcr0_lsb; /* 0x000 */
|
|
u32 spcr0_msb; /* 0x004 */
|
|
u32 spcr1_lsb; /* 0x008 */
|
|
u32 spcr1_msb; /* 0x00c */
|
|
u32 newqp; /* 0x010 */
|
|
u32 endqp; /* 0x014 */
|
|
u32 spcr2; /* 0x018 */
|
|
u32 reserved0; /* 0x01c */
|
|
u32 mspi_status; /* 0x020 */
|
|
u32 cptqp; /* 0x024 */
|
|
u32 spcr3; /* 0x028 */
|
|
u32 revision; /* 0x02c */
|
|
u32 reserved1[4]; /* 0x030 */
|
|
u32 txram[NUM_TXRAM]; /* 0x040 */
|
|
u32 rxram[NUM_RXRAM]; /* 0x0c0 */
|
|
u32 cdram[NUM_CDRAM]; /* 0x140 */
|
|
u32 write_lock; /* 0x180 */
|
|
};
|
|
|
|
/* hif_mspi masks. */
|
|
#define HIF_MSPI_SPCR2_CONT_AFTER_CMD_MASK 0x00000080
|
|
#define HIF_MSPI_SPCR2_SPE_MASK 0x00000040
|
|
#define HIF_MSPI_SPCR2_SPIFIE_MASK 0x00000020
|
|
#define HIF_MSPI_WRITE_LOCK_WRITE_LOCK_MASK 0x00000001
|
|
|
|
/* bspi offsets. */
|
|
#define BSPI_MAST_N_BOOT_CTRL 0x008
|
|
|
|
/* bspi_raf is not used in this driver. */
|
|
|
|
/* hif_spi_intr2 offsets and masks. */
|
|
#define HIF_SPI_INTR2_CPU_CLEAR 0x08
|
|
#define HIF_SPI_INTR2_CPU_MASK_SET 0x10
|
|
#define HIF_SPI_INTR2_CPU_MASK_CLEAR 0x14
|
|
#define HIF_SPI_INTR2_CPU_SET_MSPI_DONE_MASK 0x00000020
|
|
|
|
/* SPI transfer timeout in milliseconds. */
|
|
#define HIF_MSPI_WAIT 10
|
|
|
|
enum bcmstb_base_type {
|
|
HIF_MSPI,
|
|
BSPI,
|
|
HIF_SPI_INTR2,
|
|
CS_REG,
|
|
BASE_LAST,
|
|
};
|
|
|
|
struct bcmstb_spi_plat {
|
|
void *base[4];
|
|
};
|
|
|
|
struct bcmstb_spi_priv {
|
|
struct bcmstb_hif_mspi_regs *regs;
|
|
void *bspi;
|
|
void *hif_spi_intr2;
|
|
void *cs_reg;
|
|
int default_cs;
|
|
int curr_cs;
|
|
uint tx_slot;
|
|
uint rx_slot;
|
|
u8 saved_cmd[NUM_CDRAM];
|
|
uint saved_cmd_len;
|
|
void *saved_din_addr;
|
|
};
|
|
|
|
static int bcmstb_spi_of_to_plat(struct udevice *bus)
|
|
{
|
|
struct bcmstb_spi_plat *plat = dev_get_plat(bus);
|
|
const void *fdt = gd->fdt_blob;
|
|
int node = dev_of_offset(bus);
|
|
int ret = 0;
|
|
int i = 0;
|
|
struct fdt_resource resource = { 0 };
|
|
char *names[BASE_LAST] = { "hif_mspi", "bspi", "hif_spi_intr2",
|
|
"cs_reg" };
|
|
const phys_addr_t defaults[BASE_LAST] = { BCMSTB_HIF_MSPI_BASE,
|
|
BCMSTB_BSPI_BASE,
|
|
BCMSTB_HIF_SPI_INTR2,
|
|
BCMSTB_CS_REG };
|
|
|
|
for (i = 0; i < BASE_LAST; i++) {
|
|
plat->base[i] = (void *)defaults[i];
|
|
|
|
ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
|
|
names[i], &resource);
|
|
if (ret) {
|
|
printf("%s: Assuming BCMSTB SPI %s address 0x0x%p\n",
|
|
__func__, names[i], (void *)defaults[i]);
|
|
} else {
|
|
plat->base[i] = (void *)resource.start;
|
|
debug("BCMSTB SPI %s address: 0x0x%p\n",
|
|
names[i], (void *)plat->base[i]);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcmstb_spi_hw_set_parms(struct bcmstb_spi_priv *priv)
|
|
{
|
|
writel(SPBR_MIN, &priv->regs->spcr0_lsb);
|
|
writel(BITS_PER_WORD << 2 | SPI_MODE_3, &priv->regs->spcr0_msb);
|
|
}
|
|
|
|
static void bcmstb_spi_enable_interrupt(void *base, u32 mask)
|
|
{
|
|
void *reg = base + HIF_SPI_INTR2_CPU_MASK_CLEAR;
|
|
|
|
writel(readl(reg) | mask, reg);
|
|
readl(reg);
|
|
}
|
|
|
|
static void bcmstb_spi_disable_interrupt(void *base, u32 mask)
|
|
{
|
|
void *reg = base + HIF_SPI_INTR2_CPU_MASK_SET;
|
|
|
|
writel(readl(reg) | mask, reg);
|
|
readl(reg);
|
|
}
|
|
|
|
static void bcmstb_spi_clear_interrupt(void *base, u32 mask)
|
|
{
|
|
void *reg = base + HIF_SPI_INTR2_CPU_CLEAR;
|
|
|
|
writel(readl(reg) | mask, reg);
|
|
readl(reg);
|
|
}
|
|
|
|
static int bcmstb_spi_probe(struct udevice *bus)
|
|
{
|
|
struct bcmstb_spi_plat *plat = dev_get_plat(bus);
|
|
struct bcmstb_spi_priv *priv = dev_get_priv(bus);
|
|
|
|
priv->regs = plat->base[HIF_MSPI];
|
|
priv->bspi = plat->base[BSPI];
|
|
priv->hif_spi_intr2 = plat->base[HIF_SPI_INTR2];
|
|
priv->cs_reg = plat->base[CS_REG];
|
|
priv->default_cs = 0;
|
|
priv->curr_cs = -1;
|
|
priv->tx_slot = 0;
|
|
priv->rx_slot = 0;
|
|
memset(priv->saved_cmd, 0, NUM_CDRAM);
|
|
priv->saved_cmd_len = 0;
|
|
priv->saved_din_addr = NULL;
|
|
|
|
debug("spi_xfer: tx regs: 0x%p\n", &priv->regs->txram[0]);
|
|
debug("spi_xfer: rx regs: 0x%p\n", &priv->regs->rxram[0]);
|
|
|
|
/* Disable BSPI. */
|
|
writel(1, priv->bspi + BSPI_MAST_N_BOOT_CTRL);
|
|
readl(priv->bspi + BSPI_MAST_N_BOOT_CTRL);
|
|
|
|
/* Set up interrupts. */
|
|
bcmstb_spi_disable_interrupt(priv->hif_spi_intr2, 0xffffffff);
|
|
bcmstb_spi_clear_interrupt(priv->hif_spi_intr2, 0xffffffff);
|
|
bcmstb_spi_enable_interrupt(priv->hif_spi_intr2,
|
|
HIF_SPI_INTR2_CPU_SET_MSPI_DONE_MASK);
|
|
|
|
/* Set up control registers. */
|
|
writel(0, &priv->regs->spcr1_lsb);
|
|
writel(0, &priv->regs->spcr1_msb);
|
|
writel(0, &priv->regs->newqp);
|
|
writel(0, &priv->regs->endqp);
|
|
writel(HIF_MSPI_SPCR2_SPIFIE_MASK, &priv->regs->spcr2);
|
|
writel(0, &priv->regs->spcr3);
|
|
|
|
bcmstb_spi_hw_set_parms(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcmstb_spi_submit(struct bcmstb_spi_priv *priv, bool done)
|
|
{
|
|
debug("WR NEWQP: %d\n", 0);
|
|
writel(0, &priv->regs->newqp);
|
|
|
|
debug("WR ENDQP: %d\n", priv->tx_slot - 1);
|
|
writel(priv->tx_slot - 1, &priv->regs->endqp);
|
|
|
|
if (done) {
|
|
debug("WR CDRAM[%d]: %02x\n", priv->tx_slot - 1,
|
|
readl(&priv->regs->cdram[priv->tx_slot - 1]) & ~0x80);
|
|
writel(readl(&priv->regs->cdram[priv->tx_slot - 1]) & ~0x80,
|
|
&priv->regs->cdram[priv->tx_slot - 1]);
|
|
}
|
|
|
|
/* Force chip select first time. */
|
|
if (priv->curr_cs != priv->default_cs) {
|
|
debug("spi_xfer: switching chip select to %d\n",
|
|
priv->default_cs);
|
|
writel((readl(priv->cs_reg) & ~0xff) | (1 << priv->default_cs),
|
|
priv->cs_reg);
|
|
readl(priv->cs_reg);
|
|
udelay(10);
|
|
priv->curr_cs = priv->default_cs;
|
|
}
|
|
|
|
debug("WR WRITE_LOCK: %02x\n", 1);
|
|
writel((readl(&priv->regs->write_lock) &
|
|
~HIF_MSPI_WRITE_LOCK_WRITE_LOCK_MASK) | 1,
|
|
&priv->regs->write_lock);
|
|
readl(&priv->regs->write_lock);
|
|
|
|
debug("WR SPCR2: %02x\n",
|
|
HIF_MSPI_SPCR2_SPIFIE_MASK |
|
|
HIF_MSPI_SPCR2_SPE_MASK |
|
|
HIF_MSPI_SPCR2_CONT_AFTER_CMD_MASK);
|
|
writel(HIF_MSPI_SPCR2_SPIFIE_MASK |
|
|
HIF_MSPI_SPCR2_SPE_MASK |
|
|
HIF_MSPI_SPCR2_CONT_AFTER_CMD_MASK,
|
|
&priv->regs->spcr2);
|
|
}
|
|
|
|
static int bcmstb_spi_wait(struct bcmstb_spi_priv *priv)
|
|
{
|
|
u32 start_time = get_timer(0);
|
|
u32 status = readl(&priv->regs->mspi_status);
|
|
|
|
while (!(status & 1)) {
|
|
if (get_timer(start_time) > HIF_MSPI_WAIT)
|
|
return -ETIMEDOUT;
|
|
status = readl(&priv->regs->mspi_status);
|
|
}
|
|
|
|
writel(readl(&priv->regs->mspi_status) & ~1, &priv->regs->mspi_status);
|
|
bcmstb_spi_clear_interrupt(priv->hif_spi_intr2,
|
|
HIF_SPI_INTR2_CPU_SET_MSPI_DONE_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcmstb_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
uint len = bitlen / 8;
|
|
uint tx_len = len;
|
|
uint rx_len = len;
|
|
const u8 *out_bytes = (u8 *)dout;
|
|
u8 *in_bytes = (u8 *)din;
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct bcmstb_spi_priv *priv = dev_get_priv(bus);
|
|
struct bcmstb_hif_mspi_regs *regs = priv->regs;
|
|
|
|
debug("spi_xfer: %d, t: 0x%p, r: 0x%p, f: %lx\n",
|
|
len, dout, din, flags);
|
|
debug("spi_xfer: chip select: %x\n", readl(priv->cs_reg) & 0xff);
|
|
debug("spi_xfer: tx addr: 0x%p\n", ®s->txram[0]);
|
|
debug("spi_xfer: rx addr: 0x%p\n", ®s->rxram[0]);
|
|
debug("spi_xfer: cd addr: 0x%p\n", ®s->cdram[0]);
|
|
|
|
if (flags & SPI_XFER_END) {
|
|
debug("spi_xfer: clearing saved din address: 0x%p\n",
|
|
priv->saved_din_addr);
|
|
priv->saved_din_addr = NULL;
|
|
priv->saved_cmd_len = 0;
|
|
memset(priv->saved_cmd, 0, NUM_CDRAM);
|
|
}
|
|
|
|
if (bitlen == 0)
|
|
return 0;
|
|
|
|
if (bitlen % 8) {
|
|
printf("%s: Non-byte-aligned transfer\n", __func__);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (flags & ~(SPI_XFER_BEGIN | SPI_XFER_END)) {
|
|
printf("%s: Unsupported flags: %lx\n", __func__, flags);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (flags & SPI_XFER_BEGIN) {
|
|
priv->tx_slot = 0;
|
|
priv->rx_slot = 0;
|
|
|
|
if (out_bytes && len > NUM_CDRAM) {
|
|
printf("%s: Unable to save transfer\n", __func__);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (out_bytes && !(flags & SPI_XFER_END)) {
|
|
/*
|
|
* This is the start of a transmit operation
|
|
* that will need repeating if the calling
|
|
* code polls for the result. Save it for
|
|
* subsequent transmission.
|
|
*/
|
|
debug("spi_xfer: saving command: %x, %d\n",
|
|
out_bytes[0], len);
|
|
priv->saved_cmd_len = len;
|
|
memcpy(priv->saved_cmd, out_bytes, priv->saved_cmd_len);
|
|
}
|
|
}
|
|
|
|
if (!(flags & (SPI_XFER_BEGIN | SPI_XFER_END))) {
|
|
if (priv->saved_din_addr == din) {
|
|
/*
|
|
* The caller is polling for status. Repeat
|
|
* the last transmission.
|
|
*/
|
|
int ret = 0;
|
|
|
|
debug("spi_xfer: Making recursive call\n");
|
|
ret = bcmstb_spi_xfer(dev, priv->saved_cmd_len * 8,
|
|
priv->saved_cmd, NULL,
|
|
SPI_XFER_BEGIN);
|
|
if (ret) {
|
|
printf("%s: Recursive call failed\n", __func__);
|
|
return ret;
|
|
}
|
|
} else {
|
|
debug("spi_xfer: saving din address: 0x%p\n", din);
|
|
priv->saved_din_addr = din;
|
|
}
|
|
}
|
|
|
|
while (rx_len > 0) {
|
|
priv->rx_slot = priv->tx_slot;
|
|
|
|
while (priv->tx_slot < NUM_CDRAM && tx_len > 0) {
|
|
bcmstb_spi_hw_set_parms(priv);
|
|
debug("WR TXRAM[%d]: %02x\n", priv->tx_slot,
|
|
out_bytes ? out_bytes[len - tx_len] : 0xff);
|
|
writel(out_bytes ? out_bytes[len - tx_len] : 0xff,
|
|
®s->txram[priv->tx_slot << 1]);
|
|
debug("WR CDRAM[%d]: %02x\n", priv->tx_slot, 0x8e);
|
|
writel(0x8e, ®s->cdram[priv->tx_slot]);
|
|
priv->tx_slot++;
|
|
tx_len--;
|
|
if (!in_bytes)
|
|
rx_len--;
|
|
}
|
|
|
|
debug("spi_xfer: early return clauses: %d, %d, %d\n",
|
|
len <= NUM_CDRAM,
|
|
!in_bytes,
|
|
(flags & (SPI_XFER_BEGIN |
|
|
SPI_XFER_END)) == SPI_XFER_BEGIN);
|
|
if (len <= NUM_CDRAM &&
|
|
!in_bytes &&
|
|
(flags & (SPI_XFER_BEGIN | SPI_XFER_END)) == SPI_XFER_BEGIN)
|
|
return 0;
|
|
|
|
bcmstb_spi_submit(priv, tx_len == 0);
|
|
|
|
if (bcmstb_spi_wait(priv) == -ETIMEDOUT) {
|
|
printf("%s: Timed out\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
priv->tx_slot %= NUM_CDRAM;
|
|
|
|
if (in_bytes) {
|
|
while (priv->rx_slot < NUM_CDRAM && rx_len > 0) {
|
|
in_bytes[len - rx_len] =
|
|
readl(®s->rxram[(priv->rx_slot << 1)
|
|
+ 1])
|
|
& 0xff;
|
|
debug("RD RXRAM[%d]: %02x\n",
|
|
priv->rx_slot, in_bytes[len - rx_len]);
|
|
priv->rx_slot++;
|
|
rx_len--;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (flags & SPI_XFER_END) {
|
|
debug("WR WRITE_LOCK: %02x\n", 0);
|
|
writel((readl(&priv->regs->write_lock) &
|
|
~HIF_MSPI_WRITE_LOCK_WRITE_LOCK_MASK) | 0,
|
|
&priv->regs->write_lock);
|
|
readl(&priv->regs->write_lock);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcmstb_spi_set_speed(struct udevice *dev, uint speed)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int bcmstb_spi_set_mode(struct udevice *dev, uint mode)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops bcmstb_spi_ops = {
|
|
.xfer = bcmstb_spi_xfer,
|
|
.set_speed = bcmstb_spi_set_speed,
|
|
.set_mode = bcmstb_spi_set_mode,
|
|
};
|
|
|
|
static const struct udevice_id bcmstb_spi_id[] = {
|
|
{ .compatible = "brcm,spi-brcmstb" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(bcmstb_spi) = {
|
|
.name = "bcmstb_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = bcmstb_spi_id,
|
|
.ops = &bcmstb_spi_ops,
|
|
.of_to_plat = bcmstb_spi_of_to_plat,
|
|
.probe = bcmstb_spi_probe,
|
|
.plat_auto = sizeof(struct bcmstb_spi_plat),
|
|
.priv_auto = sizeof(struct bcmstb_spi_priv),
|
|
};
|