mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
b62450cf22
CONFIG_VAL(DEBUG_UART_BASE) expands to CONFIG_DEBUG_UART_BASE or
CONFIG_SPL_DEBUG_UART_BASE or CONFIG_TPL_DEBUG_UART_BASE and allows boards
to set different values for SPL, TPL and U-Boot Proper.
For ns16550 driver this support is there since commit d293759d55
("serial: ns16550: Add support for SPL_DEBUG_UART_BASE").
Signed-off-by: Pali Rohár <pali@kernel.org>
292 lines
7.2 KiB
C
292 lines
7.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016, STMicroelectronics - All Rights Reserved
|
|
* Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
|
|
*/
|
|
|
|
#define LOG_CATEGORY UCLASS_SERIAL
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <reset.h>
|
|
#include <serial.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/stm32.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include "serial_stm32.h"
|
|
#include <dm/device_compat.h>
|
|
|
|
static void _stm32_serial_setbrg(fdt_addr_t base,
|
|
struct stm32_uart_info *uart_info,
|
|
u32 clock_rate,
|
|
int baudrate)
|
|
{
|
|
bool stm32f4 = uart_info->stm32f4;
|
|
u32 int_div, mantissa, fraction, oversampling;
|
|
|
|
int_div = DIV_ROUND_CLOSEST(clock_rate, baudrate);
|
|
|
|
if (int_div < 16) {
|
|
oversampling = 8;
|
|
setbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_OVER8);
|
|
} else {
|
|
oversampling = 16;
|
|
clrbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_OVER8);
|
|
}
|
|
|
|
mantissa = (int_div / oversampling) << USART_BRR_M_SHIFT;
|
|
fraction = int_div % oversampling;
|
|
|
|
writel(mantissa | fraction, base + BRR_OFFSET(stm32f4));
|
|
}
|
|
|
|
static int stm32_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct stm32x7_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
_stm32_serial_setbrg(plat->base, plat->uart_info,
|
|
plat->clock_rate, baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_serial_setconfig(struct udevice *dev, uint serial_config)
|
|
{
|
|
struct stm32x7_serial_plat *plat = dev_get_plat(dev);
|
|
bool stm32f4 = plat->uart_info->stm32f4;
|
|
u8 uart_enable_bit = plat->uart_info->uart_enable_bit;
|
|
u32 cr1 = plat->base + CR1_OFFSET(stm32f4);
|
|
u32 config = 0;
|
|
uint parity = SERIAL_GET_PARITY(serial_config);
|
|
uint bits = SERIAL_GET_BITS(serial_config);
|
|
uint stop = SERIAL_GET_STOP(serial_config);
|
|
|
|
/*
|
|
* only parity config is implemented, check if other serial settings
|
|
* are the default one.
|
|
* (STM32F4 serial IP didn't support parity setting)
|
|
*/
|
|
if (bits != SERIAL_8_BITS || stop != SERIAL_ONE_STOP || stm32f4)
|
|
return -ENOTSUPP; /* not supported in driver*/
|
|
|
|
clrbits_le32(cr1, USART_CR1_RE | USART_CR1_TE | BIT(uart_enable_bit));
|
|
/* update usart configuration (uart need to be disable)
|
|
* PCE: parity check enable
|
|
* PS : '0' : Even / '1' : Odd
|
|
* M[1:0] = '00' : 8 Data bits
|
|
* M[1:0] = '01' : 9 Data bits with parity
|
|
*/
|
|
switch (parity) {
|
|
default:
|
|
case SERIAL_PAR_NONE:
|
|
config = 0;
|
|
break;
|
|
case SERIAL_PAR_ODD:
|
|
config = USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0;
|
|
break;
|
|
case SERIAL_PAR_EVEN:
|
|
config = USART_CR1_PCE | USART_CR1_M0;
|
|
break;
|
|
}
|
|
|
|
clrsetbits_le32(cr1,
|
|
USART_CR1_PCE | USART_CR1_PS | USART_CR1_M1 |
|
|
USART_CR1_M0,
|
|
config);
|
|
setbits_le32(cr1, USART_CR1_RE | USART_CR1_TE | BIT(uart_enable_bit));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_serial_getc(struct udevice *dev)
|
|
{
|
|
struct stm32x7_serial_plat *plat = dev_get_plat(dev);
|
|
bool stm32f4 = plat->uart_info->stm32f4;
|
|
fdt_addr_t base = plat->base;
|
|
u32 isr = readl(base + ISR_OFFSET(stm32f4));
|
|
|
|
if ((isr & USART_ISR_RXNE) == 0)
|
|
return -EAGAIN;
|
|
|
|
if (isr & (USART_ISR_PE | USART_ISR_ORE | USART_ISR_FE)) {
|
|
if (!stm32f4)
|
|
setbits_le32(base + ICR_OFFSET,
|
|
USART_ICR_PCECF | USART_ICR_ORECF |
|
|
USART_ICR_FECF);
|
|
else
|
|
readl(base + RDR_OFFSET(stm32f4));
|
|
return -EIO;
|
|
}
|
|
|
|
return readl(base + RDR_OFFSET(stm32f4));
|
|
}
|
|
|
|
static int _stm32_serial_putc(fdt_addr_t base,
|
|
struct stm32_uart_info *uart_info,
|
|
const char c)
|
|
{
|
|
bool stm32f4 = uart_info->stm32f4;
|
|
|
|
if ((readl(base + ISR_OFFSET(stm32f4)) & USART_ISR_TXE) == 0)
|
|
return -EAGAIN;
|
|
|
|
writel(c, base + TDR_OFFSET(stm32f4));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_serial_putc(struct udevice *dev, const char c)
|
|
{
|
|
struct stm32x7_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
return _stm32_serial_putc(plat->base, plat->uart_info, c);
|
|
}
|
|
|
|
static int stm32_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct stm32x7_serial_plat *plat = dev_get_plat(dev);
|
|
bool stm32f4 = plat->uart_info->stm32f4;
|
|
fdt_addr_t base = plat->base;
|
|
|
|
if (input)
|
|
return readl(base + ISR_OFFSET(stm32f4)) &
|
|
USART_ISR_RXNE ? 1 : 0;
|
|
else
|
|
return readl(base + ISR_OFFSET(stm32f4)) &
|
|
USART_ISR_TXE ? 0 : 1;
|
|
}
|
|
|
|
static void _stm32_serial_init(fdt_addr_t base,
|
|
struct stm32_uart_info *uart_info)
|
|
{
|
|
bool stm32f4 = uart_info->stm32f4;
|
|
u8 uart_enable_bit = uart_info->uart_enable_bit;
|
|
|
|
/* Disable uart-> enable fifo -> enable uart */
|
|
clrbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_RE | USART_CR1_TE |
|
|
BIT(uart_enable_bit));
|
|
if (uart_info->has_fifo)
|
|
setbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_FIFOEN);
|
|
setbits_le32(base + CR1_OFFSET(stm32f4), USART_CR1_RE | USART_CR1_TE |
|
|
BIT(uart_enable_bit));
|
|
}
|
|
|
|
static int stm32_serial_probe(struct udevice *dev)
|
|
{
|
|
struct stm32x7_serial_plat *plat = dev_get_plat(dev);
|
|
struct clk clk;
|
|
struct reset_ctl reset;
|
|
int ret;
|
|
|
|
plat->uart_info = (struct stm32_uart_info *)dev_get_driver_data(dev);
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_get_by_index(dev, 0, &reset);
|
|
if (!ret) {
|
|
reset_assert(&reset);
|
|
udelay(2);
|
|
reset_deassert(&reset);
|
|
}
|
|
|
|
plat->clock_rate = clk_get_rate(&clk);
|
|
if (!plat->clock_rate) {
|
|
clk_disable(&clk);
|
|
return -EINVAL;
|
|
};
|
|
|
|
_stm32_serial_init(plat->base, plat->uart_info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id stm32_serial_id[] = {
|
|
{ .compatible = "st,stm32-uart", .data = (ulong)&stm32f4_info},
|
|
{ .compatible = "st,stm32f7-uart", .data = (ulong)&stm32f7_info},
|
|
{ .compatible = "st,stm32h7-uart", .data = (ulong)&stm32h7_info},
|
|
{}
|
|
};
|
|
|
|
static int stm32_serial_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct stm32x7_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
plat->base = dev_read_addr(dev);
|
|
if (plat->base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_serial_ops stm32_serial_ops = {
|
|
.putc = stm32_serial_putc,
|
|
.pending = stm32_serial_pending,
|
|
.getc = stm32_serial_getc,
|
|
.setbrg = stm32_serial_setbrg,
|
|
.setconfig = stm32_serial_setconfig
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_stm32) = {
|
|
.name = "serial_stm32",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = of_match_ptr(stm32_serial_id),
|
|
.of_to_plat = of_match_ptr(stm32_serial_of_to_plat),
|
|
.plat_auto = sizeof(struct stm32x7_serial_plat),
|
|
.ops = &stm32_serial_ops,
|
|
.probe = stm32_serial_probe,
|
|
#if !CONFIG_IS_ENABLED(OF_CONTROL)
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_DEBUG_UART_STM32
|
|
#include <debug_uart.h>
|
|
static inline struct stm32_uart_info *_debug_uart_info(void)
|
|
{
|
|
struct stm32_uart_info *uart_info;
|
|
|
|
#if defined(CONFIG_STM32F4)
|
|
uart_info = &stm32f4_info;
|
|
#elif defined(CONFIG_STM32F7)
|
|
uart_info = &stm32f7_info;
|
|
#else
|
|
uart_info = &stm32h7_info;
|
|
#endif
|
|
return uart_info;
|
|
}
|
|
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
fdt_addr_t base = CONFIG_VAL(DEBUG_UART_BASE);
|
|
struct stm32_uart_info *uart_info = _debug_uart_info();
|
|
|
|
_stm32_serial_init(base, uart_info);
|
|
_stm32_serial_setbrg(base, uart_info,
|
|
CONFIG_DEBUG_UART_CLOCK,
|
|
CONFIG_BAUDRATE);
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int c)
|
|
{
|
|
fdt_addr_t base = CONFIG_VAL(DEBUG_UART_BASE);
|
|
struct stm32_uart_info *uart_info = _debug_uart_info();
|
|
|
|
while (_stm32_serial_putc(base, uart_info, c) == -EAGAIN)
|
|
;
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
#endif
|