mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
cdc902bd9c
CONFIG_SH4 was already defined in arch/sh/sh4/config.mk. This removes CONFIG_SH4 from board config files of SH4. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
159 lines
5.1 KiB
C
159 lines
5.1 KiB
C
/*
|
|
* Configuation settings for the Renesas Solutions AP-325RXA board
|
|
*
|
|
* Copyright (C) 2008 Renesas Solutions Corp.
|
|
* Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __AP325RXA_H
|
|
#define __AP325RXA_H
|
|
|
|
#undef DEBUG
|
|
#define CONFIG_CPU_SH7723 1
|
|
#define CONFIG_AP325RXA 1
|
|
|
|
#define CONFIG_CMD_LOADB
|
|
#define CONFIG_CMD_LOADS
|
|
#define CONFIG_CMD_FLASH
|
|
#define CONFIG_CMD_MEMORY
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_NFS
|
|
#define CONFIG_CMD_SDRAM
|
|
#define CONFIG_CMD_SAVEENV
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
#define CONFIG_BAUDRATE 38400
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_BOOTARGS "console=ttySC2,38400"
|
|
|
|
#define CONFIG_VERSION_VARIABLE
|
|
#undef CONFIG_SHOW_BOOT_PROGRESS
|
|
|
|
/* SMC9118 */
|
|
#define CONFIG_SMC911X 1
|
|
#define CONFIG_SMC911X_32_BIT 1
|
|
#define CONFIG_SMC911X_BASE 0xB6080000
|
|
|
|
/* MEMORY */
|
|
#define AP325RXA_SDRAM_BASE (0x88000000)
|
|
#define AP325RXA_FLASH_BASE_1 (0xA0000000)
|
|
#define AP325RXA_FLASH_BANK_SIZE (128 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
|
|
|
|
/* undef to save memory */
|
|
#define CONFIG_SYS_LONGHELP
|
|
/* Monitor Command Prompt */
|
|
/* Buffer size for input from the Console */
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
/* Buffer size for Console output */
|
|
#define CONFIG_SYS_PBSIZE 256
|
|
/* max args accepted for monitor commands */
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
/* Buffer size for Boot Arguments passed to kernel */
|
|
#define CONFIG_SYS_BARGSIZE 512
|
|
/* List of legal baudrate settings for this board */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 38400 }
|
|
|
|
/* SCIF */
|
|
#define CONFIG_SCIF_CONSOLE 1
|
|
#define CONFIG_SCIF_A 1 /* SH7723 has SCIF and SCIFA */
|
|
#define CONFIG_CONS_SCIF5 1
|
|
|
|
/* Suppress display of console information at boot */
|
|
#undef CONFIG_SYS_CONSOLE_INFO_QUIET
|
|
#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
|
|
#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
|
|
|
|
#define CONFIG_SYS_MEMTEST_START (AP325RXA_SDRAM_BASE)
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
|
|
|
|
/* Enable alternate, more extensive, memory test */
|
|
#undef CONFIG_SYS_ALT_MEMTEST
|
|
/* Scratch address used by the alternate memory test */
|
|
#undef CONFIG_SYS_MEMTEST_SCRATCH
|
|
|
|
/* Enable temporary baudrate change while serial download */
|
|
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE (AP325RXA_SDRAM_BASE)
|
|
/* maybe more, but if so u-boot doesn't know about it... */
|
|
#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)
|
|
/* default load address for scripts ?!? */
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
|
|
|
|
/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
|
|
#define CONFIG_SYS_MONITOR_BASE (AP325RXA_FLASH_BASE_1)
|
|
/* Monitor size */
|
|
#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
|
|
/* Size of DRAM reserved for malloc() use */
|
|
#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
|
|
|
|
/* FLASH */
|
|
#define CONFIG_FLASH_CFI_DRIVER 1
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#undef CONFIG_SYS_FLASH_QUIET_TEST
|
|
/* print 'E' for empty sector on flinfo */
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
/* Physical start address of Flash memory */
|
|
#define CONFIG_SYS_FLASH_BASE (AP325RXA_FLASH_BASE_1)
|
|
/* Max number of sectors on each Flash chip */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512
|
|
|
|
/*
|
|
* IDE support
|
|
*/
|
|
#define CONFIG_IDE_RESET 1
|
|
#define CONFIG_SYS_PIO_MODE 1
|
|
#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 1
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0xB4180000
|
|
#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x200 /* data reg offset */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x200 /* reg offset */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x210 /* alternate register offset */
|
|
#define CONFIG_IDE_SWAP_IO
|
|
|
|
/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}
|
|
|
|
/* Timeout for Flash erase operations (in ms) */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
|
|
/* Timeout for Flash write operations (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
|
|
/* Timeout for Flash set sector lock bit operations (in ms) */
|
|
#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
|
|
/* Timeout for Flash clear lock bit operations (in ms) */
|
|
#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)
|
|
|
|
/*
|
|
* Use hardware flash sectors protection instead
|
|
* of U-Boot software protection
|
|
*/
|
|
#undef CONFIG_SYS_FLASH_PROTECTION
|
|
#undef CONFIG_SYS_DIRECT_FLASH_TFTP
|
|
|
|
/* ENV setting */
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
|
|
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
|
|
/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
|
|
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
|
|
|
|
/* Board Clock */
|
|
#define CONFIG_SYS_CLK_FREQ 33333333
|
|
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
|
|
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
|
|
#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
|
|
|
|
#endif /* __AP325RXA_H */
|