u-boot/post/board/pdm360ng/coproc_com.c
Anatolij Gustschin 29fd7ceb3c mpc5121: pdm360ng: add coprocessor POST
Adds coprocessor communication POST code

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24 22:56:41 +02:00

97 lines
2.6 KiB
C

/*
* (C) Copyright 2010 DENX Software Engineering,
* Anatolij Gustschin, agust@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Co-Processor communication POST
*/
#include <common.h>
#include <post.h>
#include <serial.h>
#if defined(CONFIG_SERIAL_MULTI)
/*
* Actually the termination sequence of the coprocessor
* commands is "\r\n" (CR LF), but here we use a side effect of
* the putc() routine of the serial driver which checks for LF
* and sends CR before sending LF. Therefore the termination
* sequence in the command below is only "\n".
* "alive" string is the coprocessor response for ping command
* and not a command, therefore it is terminated with "\r\n".
*/
char alive[] = "$AL;38\r\n";
char ping[] = "$PI;2C\n";
int coprocessor_post_test(int flags)
{
struct stdio_dev *cop_port;
int ret;
char buf[10];
/* Test IO Coprocessor communication */
cop_port = open_port(4, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE);
if (!cop_port)
return -1;
write_port(cop_port, ping);
udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY);
memset(buf, 0, sizeof(buf));
ret = read_port(cop_port, buf, sizeof(buf));
close_port(4);
if (ret <= 0) {
post_log("Error: Can't read IO Coprocessor port.\n");
return -1;
}
if (strcmp(buf, alive)) {
post_log("Error: IO-Cop. resp.: %s\n", buf);
return -1;
}
/* Test WD Coprocessor communication */
cop_port = open_port(1, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE);
if (!cop_port) {
post_log("Error: Can't open WD Coprocessor port.\n");
return -1;
}
write_port(cop_port, ping);
udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY);
memset(buf, 0, sizeof(buf));
ret = read_port(cop_port, buf, sizeof(buf));
close_port(1);
if (ret <= 0) {
post_log("Error: Can't read WD Coprocessor port.\n");
return -1;
}
if (strcmp(buf, alive)) {
post_log("Error: WD-Cop. resp.: %s\n", buf);
return -1;
}
return 0;
}
#endif /* CONFIG_SERIAL_MULTI */