u-boot/board/mikrotik/crs305-1g-4s/README
Luka Kovacic 22bb913fdf arm: mvebu: Add CRS305-1G-4S board
CRS305-1G-4S has a switch chip with an integrated CPU (98DX3236) and
like some of the other similar boards requires bin_hdr.
bin_hdr (DDR3 init stage) is currently retrieved from the stock
bootloader and compiled into the kwb image.

Adds support for U-Boot, enable UART, SPI, Winbond SPI flash chip
support and writing env to SPI flash.

Signed-off-by: Luka Kovacic <me@lukakovacic.xyz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2019-05-09 07:35:04 +02:00

23 lines
675 B
Text

MikroTik CRS305-1G-4S+IN
========================
CRS305-1G-4S+IN is a 4x SFP+ switch with a Gigabit Ethernet port for management.
Specifications:
- Marvell Prestera 98DX3236 switch with an integrated ARMv7 CPU
- 512 MB DDR3 RAM
- UART @ 115200bps
- 4x SFP+
- Gigabit Ethernet (AR8033)
- 16 MB SPI flash (Winbond 25Q128JVSM)
Currently supported hardware:
- UART boot (using kwboot) and console
- SPI boot, environment and load kernel
Planned:
- Gigabit Ethernet support
Getting binary.0
================
binary.0 (DDR3 init phase) can be retrieved/extracted from the integrated bootloader on the SPI flash.
Then binary.0 can be replaced with the extracted blob.