u-boot/drivers/serial/serial_lpuart.c
Ye Li cc7df0b9e8 serial: lpuart: Enable IPG clock
Current codes only ennable the PER clock. However on iMX8 the LPUART
also needs IPG clock which is an LPCG. Should not depend on the default
LPCG setting.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2023-10-16 14:02:38 +02:00

576 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2019 NXP
* Copyright 2013 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <clock_legacy.h>
#include <clk.h>
#include <dm.h>
#include <fsl_lpuart.h>
#include <log.h>
#include <watchdog.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <serial.h>
#include <dm/device_compat.h>
#include <linux/bitops.h>
#include <linux/compiler.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#define US1_TDRE (1 << 7)
#define US1_RDRF (1 << 5)
#define US1_OR (1 << 3)
#define UC2_TE (1 << 3)
#define UC2_RE (1 << 2)
#define CFIFO_TXFLUSH (1 << 7)
#define CFIFO_RXFLUSH (1 << 6)
#define SFIFO_RXOF (1 << 2)
#define SFIFO_RXUF (1 << 0)
#define STAT_LBKDIF (1 << 31)
#define STAT_RXEDGIF (1 << 30)
#define STAT_TDRE (1 << 23)
#define STAT_RDRF (1 << 21)
#define STAT_IDLE (1 << 20)
#define STAT_OR (1 << 19)
#define STAT_NF (1 << 18)
#define STAT_FE (1 << 17)
#define STAT_PF (1 << 16)
#define STAT_MA1F (1 << 15)
#define STAT_MA2F (1 << 14)
#define STAT_FLAGS (STAT_LBKDIF | STAT_RXEDGIF | STAT_IDLE | STAT_OR | \
STAT_NF | STAT_FE | STAT_PF | STAT_MA1F | STAT_MA2F)
#define CTRL_TE (1 << 19)
#define CTRL_RE (1 << 18)
#define FIFO_RXFLUSH BIT(14)
#define FIFO_TXFLUSH BIT(15)
#define FIFO_TXSIZE_MASK 0x70
#define FIFO_TXSIZE_OFF 4
#define FIFO_RXSIZE_MASK 0x7
#define FIFO_RXSIZE_OFF 0
#define FIFO_TXFE 0x80
#if defined(CONFIG_ARCH_IMX8) || defined(CONFIG_ARCH_IMXRT)
#define FIFO_RXFE 0x08
#else
#define FIFO_RXFE 0x40
#endif
#define WATER_TXWATER_OFF 0
#define WATER_RXWATER_OFF 16
DECLARE_GLOBAL_DATA_PTR;
#define LPUART_FLAG_REGMAP_32BIT_REG BIT(0)
#define LPUART_FLAG_REGMAP_ENDIAN_BIG BIT(1)
enum lpuart_devtype {
DEV_VF610 = 1,
DEV_LS1021A,
DEV_MX7ULP,
DEV_IMX8,
DEV_IMXRT,
};
struct lpuart_serial_plat {
void *reg;
enum lpuart_devtype devtype;
ulong flags;
};
static void lpuart_read32(u32 flags, u32 *addr, u32 *val)
{
if (flags & LPUART_FLAG_REGMAP_32BIT_REG) {
if (flags & LPUART_FLAG_REGMAP_ENDIAN_BIG)
*(u32 *)val = in_be32(addr);
else
*(u32 *)val = in_le32(addr);
}
}
static void lpuart_write32(u32 flags, u32 *addr, u32 val)
{
if (flags & LPUART_FLAG_REGMAP_32BIT_REG) {
if (flags & LPUART_FLAG_REGMAP_ENDIAN_BIG)
out_be32(addr, val);
else
out_le32(addr, val);
}
}
u32 __weak get_lpuart_clk(void)
{
return get_board_sys_clk();
}
#if CONFIG_IS_ENABLED(CLK)
static int get_lpuart_clk_rate(struct udevice *dev, u32 *clk)
{
struct clk per_clk;
ulong rate;
int ret;
ret = clk_get_by_name(dev, "per", &per_clk);
if (ret) {
dev_err(dev, "Failed to get per clk: %d\n", ret);
return ret;
}
rate = clk_get_rate(&per_clk);
if ((long)rate <= 0) {
dev_err(dev, "Failed to get per clk rate: %ld\n", (long)rate);
return ret;
}
*clk = rate;
return 0;
}
#else
static inline int get_lpuart_clk_rate(struct udevice *dev, u32 *clk)
{ return -ENOSYS; }
#endif
static bool is_lpuart32(struct udevice *dev)
{
struct lpuart_serial_plat *plat = dev_get_plat(dev);
return plat->flags & LPUART_FLAG_REGMAP_32BIT_REG;
}
static void _lpuart_serial_setbrg(struct udevice *dev,
int baudrate)
{
struct lpuart_serial_plat *plat = dev_get_plat(dev);
struct lpuart_fsl *base = plat->reg;
u32 clk;
u16 sbr;
int ret;
if (CONFIG_IS_ENABLED(CLK)) {
ret = get_lpuart_clk_rate(dev, &clk);
if (ret)
return;
} else {
clk = get_lpuart_clk();
}
sbr = (u16)(clk / (16 * baudrate));
/* place adjustment later - n/32 BRFA */
__raw_writeb(sbr >> 8, &base->ubdh);
__raw_writeb(sbr & 0xff, &base->ubdl);
}
static int _lpuart_serial_getc(struct lpuart_serial_plat *plat)
{
struct lpuart_fsl *base = plat->reg;
if (!(__raw_readb(&base->us1) & (US1_RDRF | US1_OR)))
return -EAGAIN;
barrier();
return __raw_readb(&base->ud);
}
static int _lpuart_serial_putc(struct lpuart_serial_plat *plat,
const char c)
{
struct lpuart_fsl *base = plat->reg;
if (!(__raw_readb(&base->us1) & US1_TDRE))
return -EAGAIN;
__raw_writeb(c, &base->ud);
return 0;
}
/* Test whether a character is in the RX buffer */
static int _lpuart_serial_tstc(struct lpuart_serial_plat *plat)
{
struct lpuart_fsl *base = plat->reg;
if (__raw_readb(&base->urcfifo) == 0)
return 0;
return 1;
}
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
static int _lpuart_serial_init(struct udevice *dev)
{
struct lpuart_serial_plat *plat = dev_get_plat(dev);
struct lpuart_fsl *base = (struct lpuart_fsl *)plat->reg;
u8 ctrl;
ctrl = __raw_readb(&base->uc2);
ctrl &= ~UC2_RE;
ctrl &= ~UC2_TE;
__raw_writeb(ctrl, &base->uc2);
__raw_writeb(0, &base->umodem);
__raw_writeb(0, &base->uc1);
/* Disable FIFO and flush buffer */
__raw_writeb(0x0, &base->upfifo);
__raw_writeb(0x0, &base->utwfifo);
__raw_writeb(0x1, &base->urwfifo);
__raw_writeb(CFIFO_TXFLUSH | CFIFO_RXFLUSH, &base->ucfifo);
/* provide data bits, parity, stop bit, etc */
_lpuart_serial_setbrg(dev, gd->baudrate);
__raw_writeb(UC2_RE | UC2_TE, &base->uc2);
return 0;
}
static void _lpuart32_serial_setbrg_7ulp(struct udevice *dev,
int baudrate)
{
struct lpuart_serial_plat *plat = dev_get_plat(dev);
struct lpuart_fsl_reg32 *base = plat->reg;
u32 sbr, osr, baud_diff, tmp_osr, tmp_sbr, tmp_diff, tmp;
u32 clk;
int ret;
if (CONFIG_IS_ENABLED(CLK)) {
ret = get_lpuart_clk_rate(dev, &clk);
if (ret)
return;
} else {
clk = get_lpuart_clk();
}
baud_diff = baudrate;
osr = 0;
sbr = 0;
for (tmp_osr = 4; tmp_osr <= 32; tmp_osr++) {
tmp_sbr = (clk / (baudrate * tmp_osr));
if (tmp_sbr == 0)
tmp_sbr = 1;
/*calculate difference in actual buad w/ current values */
tmp_diff = (clk / (tmp_osr * tmp_sbr));
tmp_diff = tmp_diff - baudrate;
/* select best values between sbr and sbr+1 */
if (tmp_diff > (baudrate - (clk / (tmp_osr * (tmp_sbr + 1))))) {
tmp_diff = baudrate - (clk / (tmp_osr * (tmp_sbr + 1)));
tmp_sbr++;
}
if (tmp_diff <= baud_diff) {
baud_diff = tmp_diff;
osr = tmp_osr;
sbr = tmp_sbr;
}
}
/*
* TODO: handle buadrate outside acceptable rate
* if (baudDiff > ((config->baudRate_Bps / 100) * 3))
* {
* Unacceptable baud rate difference of more than 3%
* return kStatus_LPUART_BaudrateNotSupport;
* }
*/
tmp = in_le32(&base->baud);
if ((osr > 3) && (osr < 8))
tmp |= LPUART_BAUD_BOTHEDGE_MASK;
tmp &= ~LPUART_BAUD_OSR_MASK;
tmp |= LPUART_BAUD_OSR(osr-1);
tmp &= ~LPUART_BAUD_SBR_MASK;
tmp |= LPUART_BAUD_SBR(sbr);
/* explicitly disable 10 bit mode & set 1 stop bit */
tmp &= ~(LPUART_BAUD_M10_MASK | LPUART_BAUD_SBNS_MASK);
out_le32(&base->baud, tmp);
}
static void _lpuart32_serial_setbrg(struct udevice *dev,
int baudrate)
{
struct lpuart_serial_plat *plat = dev_get_plat(dev);
struct lpuart_fsl_reg32 *base = plat->reg;
u32 clk;
u32 sbr;
int ret;
if (CONFIG_IS_ENABLED(CLK)) {
ret = get_lpuart_clk_rate(dev, &clk);
if (ret)
return;
} else {
clk = get_lpuart_clk();
}
sbr = (clk / (16 * baudrate));
/* place adjustment later - n/32 BRFA */
lpuart_write32(plat->flags, &base->baud, sbr);
}
static int _lpuart32_serial_getc(struct lpuart_serial_plat *plat)
{
struct lpuart_fsl_reg32 *base = plat->reg;
u32 stat, val;
lpuart_read32(plat->flags, &base->stat, &stat);
if ((stat & STAT_RDRF) == 0) {
lpuart_write32(plat->flags, &base->stat, STAT_FLAGS);
return -EAGAIN;
}
lpuart_read32(plat->flags, &base->data, &val);
lpuart_read32(plat->flags, &base->stat, &stat);
if (stat & STAT_OR)
lpuart_write32(plat->flags, &base->stat, STAT_OR);
return val & 0x3ff;
}
static int _lpuart32_serial_putc(struct lpuart_serial_plat *plat,
const char c)
{
struct lpuart_fsl_reg32 *base = plat->reg;
u32 stat;
lpuart_read32(plat->flags, &base->stat, &stat);
if (!(stat & STAT_TDRE))
return -EAGAIN;
lpuart_write32(plat->flags, &base->data, c);
return 0;
}
/* Test whether a character is in the RX buffer */
static int _lpuart32_serial_tstc(struct lpuart_serial_plat *plat)
{
struct lpuart_fsl_reg32 *base = plat->reg;
u32 water;
lpuart_read32(plat->flags, &base->water, &water);
if ((water >> 24) == 0)
return 0;
return 1;
}
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
static int _lpuart32_serial_init(struct udevice *dev)
{
struct lpuart_serial_plat *plat = dev_get_plat(dev);
struct lpuart_fsl_reg32 *base = (struct lpuart_fsl_reg32 *)plat->reg;
u32 val, tx_fifo_size;
lpuart_read32(plat->flags, &base->ctrl, &val);
val &= ~CTRL_RE;
val &= ~CTRL_TE;
lpuart_write32(plat->flags, &base->ctrl, val);
lpuart_write32(plat->flags, &base->modir, 0);
lpuart_read32(plat->flags, &base->fifo, &val);
tx_fifo_size = (val & FIFO_TXSIZE_MASK) >> FIFO_TXSIZE_OFF;
/* Set the TX water to half of FIFO size */
if (tx_fifo_size > 1)
tx_fifo_size = tx_fifo_size >> 1;
/* Set RX water to 0, to be triggered by any receive data */
lpuart_write32(plat->flags, &base->water,
(tx_fifo_size << WATER_TXWATER_OFF));
/* Enable TX and RX FIFO */
val |= (FIFO_TXFE | FIFO_RXFE | FIFO_TXFLUSH | FIFO_RXFLUSH);
lpuart_write32(plat->flags, &base->fifo, val);
lpuart_write32(plat->flags, &base->match, 0);
if (plat->devtype == DEV_MX7ULP || plat->devtype == DEV_IMX8 ||
plat->devtype == DEV_IMXRT) {
_lpuart32_serial_setbrg_7ulp(dev, gd->baudrate);
} else {
/* provide data bits, parity, stop bit, etc */
_lpuart32_serial_setbrg(dev, gd->baudrate);
}
lpuart_write32(plat->flags, &base->ctrl, CTRL_RE | CTRL_TE);
return 0;
}
static int lpuart_serial_setbrg(struct udevice *dev, int baudrate)
{
struct lpuart_serial_plat *plat = dev_get_plat(dev);
if (is_lpuart32(dev)) {
if (plat->devtype == DEV_MX7ULP || plat->devtype == DEV_IMX8 ||
plat->devtype == DEV_IMXRT)
_lpuart32_serial_setbrg_7ulp(dev, baudrate);
else
_lpuart32_serial_setbrg(dev, baudrate);
} else {
_lpuart_serial_setbrg(dev, baudrate);
}
return 0;
}
static int lpuart_serial_getc(struct udevice *dev)
{
struct lpuart_serial_plat *plat = dev_get_plat(dev);
if (is_lpuart32(dev))
return _lpuart32_serial_getc(plat);
return _lpuart_serial_getc(plat);
}
static int lpuart_serial_putc(struct udevice *dev, const char c)
{
struct lpuart_serial_plat *plat = dev_get_plat(dev);
if (is_lpuart32(dev))
return _lpuart32_serial_putc(plat, c);
return _lpuart_serial_putc(plat, c);
}
static int lpuart_serial_pending(struct udevice *dev, bool input)
{
struct lpuart_serial_plat *plat = dev_get_plat(dev);
struct lpuart_fsl *reg = plat->reg;
struct lpuart_fsl_reg32 *reg32 = plat->reg;
u32 stat;
if (is_lpuart32(dev)) {
if (input) {
return _lpuart32_serial_tstc(plat);
} else {
lpuart_read32(plat->flags, &reg32->stat, &stat);
return stat & STAT_TDRE ? 0 : 1;
}
}
if (input)
return _lpuart_serial_tstc(plat);
else
return __raw_readb(&reg->us1) & US1_TDRE ? 0 : 1;
}
static int lpuart_serial_probe(struct udevice *dev)
{
#if CONFIG_IS_ENABLED(CLK)
struct clk per_clk;
struct clk ipg_clk;
int ret;
ret = clk_get_by_name(dev, "per", &per_clk);
if (!ret) {
ret = clk_enable(&per_clk);
if (ret) {
dev_err(dev, "Failed to enable per clk: %d\n", ret);
return ret;
}
} else {
debug("%s: Failed to get per clk: %d\n", __func__, ret);
}
ret = clk_get_by_name(dev, "ipg", &ipg_clk);
if (!ret) {
ret = clk_enable(&ipg_clk);
if (ret) {
dev_err(dev, "Failed to enable ipg clk: %d\n", ret);
return ret;
}
} else {
debug("%s: Failed to get ipg clk: %d\n", __func__, ret);
}
#endif
if (is_lpuart32(dev))
return _lpuart32_serial_init(dev);
else
return _lpuart_serial_init(dev);
}
static int lpuart_serial_of_to_plat(struct udevice *dev)
{
struct lpuart_serial_plat *plat = dev_get_plat(dev);
const void *blob = gd->fdt_blob;
int node = dev_of_offset(dev);
fdt_addr_t addr;
addr = dev_read_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->reg = (void *)addr;
plat->flags = dev_get_driver_data(dev);
if (fdtdec_get_bool(blob, node, "little-endian"))
plat->flags &= ~LPUART_FLAG_REGMAP_ENDIAN_BIG;
if (!fdt_node_check_compatible(blob, node, "fsl,ls1021a-lpuart"))
plat->devtype = DEV_LS1021A;
else if (!fdt_node_check_compatible(blob, node, "fsl,imx7ulp-lpuart"))
plat->devtype = DEV_MX7ULP;
else if (!fdt_node_check_compatible(blob, node, "fsl,vf610-lpuart"))
plat->devtype = DEV_VF610;
else if (!fdt_node_check_compatible(blob, node, "fsl,imx8qm-lpuart"))
plat->devtype = DEV_IMX8;
else if (!fdt_node_check_compatible(blob, node, "fsl,imxrt-lpuart"))
plat->devtype = DEV_IMXRT;
return 0;
}
static const struct dm_serial_ops lpuart_serial_ops = {
.putc = lpuart_serial_putc,
.pending = lpuart_serial_pending,
.getc = lpuart_serial_getc,
.setbrg = lpuart_serial_setbrg,
};
static const struct udevice_id lpuart_serial_ids[] = {
{ .compatible = "fsl,ls1021a-lpuart", .data =
LPUART_FLAG_REGMAP_32BIT_REG | LPUART_FLAG_REGMAP_ENDIAN_BIG },
{ .compatible = "fsl,ls1028a-lpuart",
.data = LPUART_FLAG_REGMAP_32BIT_REG },
{ .compatible = "fsl,imx7ulp-lpuart",
.data = LPUART_FLAG_REGMAP_32BIT_REG },
{ .compatible = "fsl,vf610-lpuart"},
{ .compatible = "fsl,imx8qm-lpuart",
.data = LPUART_FLAG_REGMAP_32BIT_REG },
{ .compatible = "fsl,imxrt-lpuart",
.data = LPUART_FLAG_REGMAP_32BIT_REG },
{ }
};
U_BOOT_DRIVER(serial_lpuart) = {
.name = "serial_lpuart",
.id = UCLASS_SERIAL,
.of_match = lpuart_serial_ids,
.of_to_plat = lpuart_serial_of_to_plat,
.plat_auto = sizeof(struct lpuart_serial_plat),
.probe = lpuart_serial_probe,
.ops = &lpuart_serial_ops,
};