Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-28 22:13:08 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/mmc.h
Marek Vasut fceea99268 mmc: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot 
Older kernel versions or systems which do not connect eMMC reset line
properly may not be able to handle situations where either the eMMC
is left in HS200/HS400 mode or SD card in UHS modes by the bootloader
and may misbehave. Downgrade the eMMC to HS/HS52 mode and/or SD card
to non-UHS mode before booting the kernel to allow such older kernels
to work with modern U-Boot.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
2019-02-16 18:12:17 +01:00

855 lines
25 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2008,2010 Freescale Semiconductor, Inc
* Andy Fleming
*
* Based (loosely) on the Linux code
*/
#ifndef _MMC_H_
#define _MMC_H_
#include <linux/list.h>
#include <linux/sizes.h>
#include <linux/compiler.h>
#include <part.h>
#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
#define MMC_SUPPORTS_TUNING
#endif
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
#define MMC_SUPPORTS_TUNING
#endif
/* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */
#define SD_VERSION_SD (1U << 31)
#define MMC_VERSION_MMC (1U << 30)
#define MAKE_SDMMC_VERSION(a, b, c) \
((((u32)(a)) << 16) | ((u32)(b) << 8) | (u32)(c))
#define MAKE_SD_VERSION(a, b, c) \
(SD_VERSION_SD | MAKE_SDMMC_VERSION(a, b, c))
#define MAKE_MMC_VERSION(a, b, c) \
(MMC_VERSION_MMC | MAKE_SDMMC_VERSION(a, b, c))
#define EXTRACT_SDMMC_MAJOR_VERSION(x) \
(((u32)(x) >> 16) & 0xff)
#define EXTRACT_SDMMC_MINOR_VERSION(x) \
(((u32)(x) >> 8) & 0xff)
#define EXTRACT_SDMMC_CHANGE_VERSION(x) \
((u32)(x) & 0xff)
#define SD_VERSION_3 MAKE_SD_VERSION(3, 0, 0)
#define SD_VERSION_2 MAKE_SD_VERSION(2, 0, 0)
#define SD_VERSION_1_0 MAKE_SD_VERSION(1, 0, 0)
#define SD_VERSION_1_10 MAKE_SD_VERSION(1, 10, 0)
#define MMC_VERSION_UNKNOWN MAKE_MMC_VERSION(0, 0, 0)
#define MMC_VERSION_1_2 MAKE_MMC_VERSION(1, 2, 0)
#define MMC_VERSION_1_4 MAKE_MMC_VERSION(1, 4, 0)
#define MMC_VERSION_2_2 MAKE_MMC_VERSION(2, 2, 0)
#define MMC_VERSION_3 MAKE_MMC_VERSION(3, 0, 0)
#define MMC_VERSION_4 MAKE_MMC_VERSION(4, 0, 0)
#define MMC_VERSION_4_1 MAKE_MMC_VERSION(4, 1, 0)
#define MMC_VERSION_4_2 MAKE_MMC_VERSION(4, 2, 0)
#define MMC_VERSION_4_3 MAKE_MMC_VERSION(4, 3, 0)
#define MMC_VERSION_4_4 MAKE_MMC_VERSION(4, 4, 0)
#define MMC_VERSION_4_41 MAKE_MMC_VERSION(4, 4, 1)
#define MMC_VERSION_4_5 MAKE_MMC_VERSION(4, 5, 0)
#define MMC_VERSION_5_0 MAKE_MMC_VERSION(5, 0, 0)
#define MMC_VERSION_5_1 MAKE_MMC_VERSION(5, 1, 0)
#define MMC_CAP(mode) (1 << mode)
#define MMC_MODE_HS (MMC_CAP(MMC_HS) | MMC_CAP(SD_HS))
#define MMC_MODE_HS_52MHz MMC_CAP(MMC_HS_52)
#define MMC_MODE_DDR_52MHz MMC_CAP(MMC_DDR_52)
#define MMC_MODE_HS200 MMC_CAP(MMC_HS_200)
#define MMC_MODE_HS400 MMC_CAP(MMC_HS_400)
#define MMC_MODE_8BIT BIT(30)
#define MMC_MODE_4BIT BIT(29)
#define MMC_MODE_1BIT BIT(28)
#define MMC_MODE_SPI BIT(27)
#define SD_DATA_4BIT 0x00040000
#define IS_SD(x) ((x)->version & SD_VERSION_SD)
#define IS_MMC(x) ((x)->version & MMC_VERSION_MMC)
#define MMC_DATA_READ 1
#define MMC_DATA_WRITE 2
#define MMC_CMD_GO_IDLE_STATE 0
#define MMC_CMD_SEND_OP_COND 1
#define MMC_CMD_ALL_SEND_CID 2
#define MMC_CMD_SET_RELATIVE_ADDR 3
#define MMC_CMD_SET_DSR 4
#define MMC_CMD_SWITCH 6
#define MMC_CMD_SELECT_CARD 7
#define MMC_CMD_SEND_EXT_CSD 8
#define MMC_CMD_SEND_CSD 9
#define MMC_CMD_SEND_CID 10
#define MMC_CMD_STOP_TRANSMISSION 12
#define MMC_CMD_SEND_STATUS 13
#define MMC_CMD_SET_BLOCKLEN 16
#define MMC_CMD_READ_SINGLE_BLOCK 17
#define MMC_CMD_READ_MULTIPLE_BLOCK 18
#define MMC_CMD_SEND_TUNING_BLOCK 19
#define MMC_CMD_SEND_TUNING_BLOCK_HS200 21
#define MMC_CMD_SET_BLOCK_COUNT 23
#define MMC_CMD_WRITE_SINGLE_BLOCK 24
#define MMC_CMD_WRITE_MULTIPLE_BLOCK 25
#define MMC_CMD_ERASE_GROUP_START 35
#define MMC_CMD_ERASE_GROUP_END 36
#define MMC_CMD_ERASE 38
#define MMC_CMD_APP_CMD 55
#define MMC_CMD_SPI_READ_OCR 58
#define MMC_CMD_SPI_CRC_ON_OFF 59
#define MMC_CMD_RES_MAN 62
#define MMC_CMD62_ARG1 0xefac62ec
#define MMC_CMD62_ARG2 0xcbaea7
#define SD_CMD_SEND_RELATIVE_ADDR 3
#define SD_CMD_SWITCH_FUNC 6
#define SD_CMD_SEND_IF_COND 8
#define SD_CMD_SWITCH_UHS18V 11
#define SD_CMD_APP_SET_BUS_WIDTH 6
#define SD_CMD_APP_SD_STATUS 13
#define SD_CMD_ERASE_WR_BLK_START 32
#define SD_CMD_ERASE_WR_BLK_END 33
#define SD_CMD_APP_SEND_OP_COND 41
#define SD_CMD_APP_SEND_SCR 51
static inline bool mmc_is_tuning_cmd(uint cmdidx)
{
if ((cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) ||
(cmdidx == MMC_CMD_SEND_TUNING_BLOCK))
return true;
return false;
}
/* SCR definitions in different words */
#define SD_HIGHSPEED_BUSY 0x00020000
#define SD_HIGHSPEED_SUPPORTED 0x00020000
#define UHS_SDR12_BUS_SPEED 0
#define HIGH_SPEED_BUS_SPEED 1
#define UHS_SDR25_BUS_SPEED 1
#define UHS_SDR50_BUS_SPEED 2
#define UHS_SDR104_BUS_SPEED 3
#define UHS_DDR50_BUS_SPEED 4
#define SD_MODE_UHS_SDR12 BIT(UHS_SDR12_BUS_SPEED)
#define SD_MODE_UHS_SDR25 BIT(UHS_SDR25_BUS_SPEED)
#define SD_MODE_UHS_SDR50 BIT(UHS_SDR50_BUS_SPEED)
#define SD_MODE_UHS_SDR104 BIT(UHS_SDR104_BUS_SPEED)
#define SD_MODE_UHS_DDR50 BIT(UHS_DDR50_BUS_SPEED)
#define OCR_BUSY 0x80000000
#define OCR_HCS 0x40000000
#define OCR_S18R 0x1000000
#define OCR_VOLTAGE_MASK 0x007FFF80
#define OCR_ACCESS_MODE 0x60000000
#define MMC_ERASE_ARG 0x00000000
#define MMC_SECURE_ERASE_ARG 0x80000000
#define MMC_TRIM_ARG 0x00000001
#define MMC_DISCARD_ARG 0x00000003
#define MMC_SECURE_TRIM1_ARG 0x80000001
#define MMC_SECURE_TRIM2_ARG 0x80008000
#define MMC_STATUS_MASK (~0x0206BF7F)
#define MMC_STATUS_SWITCH_ERROR (1 << 7)
#define MMC_STATUS_RDY_FOR_DATA (1 << 8)
#define MMC_STATUS_CURR_STATE (0xf << 9)
#define MMC_STATUS_ERROR (1 << 19)
#define MMC_STATE_PRG (7 << 9)
#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */
#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */
#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */
#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */
#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */
#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */
#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */
#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */
#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */
#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */
#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */
#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */
#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */
#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */
#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */
#define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */
#define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits in EXT_CSD byte
addressed by index which are
1 in value field */
#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits in EXT_CSD byte
addressed by index, which are
1 in value field */
#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target byte to value */
#define SD_SWITCH_CHECK 0
#define SD_SWITCH_SWITCH 1
/*
* EXT_CSD fields
*/
#define EXT_CSD_ENH_START_ADDR 136 /* R/W */
#define EXT_CSD_ENH_SIZE_MULT 140 /* R/W */
#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
#define EXT_CSD_PARTITION_SETTING 155 /* R/W */
#define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */
#define EXT_CSD_MAX_ENH_SIZE_MULT 157 /* R */
#define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
#define EXT_CSD_BKOPS_EN 163 /* R/W & R/W/E */
#define EXT_CSD_WR_REL_PARAM 166 /* R */
#define EXT_CSD_WR_REL_SET 167 /* R/W */
#define EXT_CSD_RPMB_MULT 168 /* RO */
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
#define EXT_CSD_BOOT_BUS_WIDTH 177
#define EXT_CSD_PART_CONF 179 /* R/W */
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
#define EXT_CSD_HS_TIMING 185 /* R/W */
#define EXT_CSD_REV 192 /* RO */
#define EXT_CSD_CARD_TYPE 196 /* RO */
#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */
#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
#define EXT_CSD_BOOT_MULT 226 /* RO */
#define EXT_CSD_BKOPS_SUPPORT 502 /* RO */
/*
* EXT_CSD field definitions
*/
#define EXT_CSD_CMD_SET_NORMAL (1 << 0)
#define EXT_CSD_CMD_SET_SECURE (1 << 1)
#define EXT_CSD_CMD_SET_CPSECURE (1 << 2)
#define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */
#define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */
#define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2)
#define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3)
#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
| EXT_CSD_CARD_TYPE_DDR_1_2V)
#define EXT_CSD_CARD_TYPE_HS200_1_8V BIT(4) /* Card can run at 200MHz */
/* SDR mode @1.8V I/O */
#define EXT_CSD_CARD_TYPE_HS200_1_2V BIT(5) /* Card can run at 200MHz */
/* SDR mode @1.2V I/O */
#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \
EXT_CSD_CARD_TYPE_HS200_1_2V)
#define EXT_CSD_CARD_TYPE_HS400_1_8V BIT(6)
#define EXT_CSD_CARD_TYPE_HS400_1_2V BIT(7)
#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \
EXT_CSD_CARD_TYPE_HS400_1_2V)
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
#define EXT_CSD_DDR_FLAG BIT(2) /* Flag for DDR mode */
#define EXT_CSD_TIMING_LEGACY 0 /* no high speed */
#define EXT_CSD_TIMING_HS 1 /* HS */
#define EXT_CSD_TIMING_HS200 2 /* HS200 */
#define EXT_CSD_TIMING_HS400 3 /* HS400 */
#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
#define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0)
#define EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0)
#define EXT_CSD_BOOT_ACK(x) (x << 6)
#define EXT_CSD_BOOT_PART_NUM(x) (x << 3)
#define EXT_CSD_PARTITION_ACCESS(x) (x << 0)
#define EXT_CSD_EXTRACT_BOOT_ACK(x) (((x) >> 6) & 0x1)
#define EXT_CSD_EXTRACT_BOOT_PART(x) (((x) >> 3) & 0x7)
#define EXT_CSD_EXTRACT_PARTITION_ACCESS(x) ((x) & 0x7)
#define EXT_CSD_BOOT_BUS_WIDTH_MODE(x) (x << 3)
#define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2)
#define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x)
#define EXT_CSD_PARTITION_SETTING_COMPLETED (1 << 0)
#define EXT_CSD_ENH_USR (1 << 0) /* user data area is enhanced */
#define EXT_CSD_ENH_GP(x) (1 << ((x)+1)) /* GP part (x+1) is enhanced */
#define EXT_CSD_HS_CTRL_REL (1 << 0) /* host controlled WR_REL_SET */
#define EXT_CSD_WR_DATA_REL_USR (1 << 0) /* user data area WR_REL */
#define EXT_CSD_WR_DATA_REL_GP(x) (1 << ((x)+1)) /* GP part (x+1) WR_REL */
#define R1_ILLEGAL_COMMAND (1 << 22)
#define R1_APP_CMD (1 << 5)
#define MMC_RSP_PRESENT (1 << 0)
#define MMC_RSP_136 (1 << 1) /* 136 bit response */
#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
#define MMC_RSP_NONE (0)
#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \
MMC_RSP_BUSY)
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
#define MMC_RSP_R4 (MMC_RSP_PRESENT)
#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMCPART_NOAVAILABLE (0xff)
#define PART_ACCESS_MASK (0x7)
#define PART_SUPPORT (0x1)
#define ENHNCD_SUPPORT (0x2)
#define PART_ENH_ATTRIB (0x1f)
#define MMC_QUIRK_RETRY_SEND_CID BIT(0)
#define MMC_QUIRK_RETRY_SET_BLOCKLEN BIT(1)
enum mmc_voltage {
MMC_SIGNAL_VOLTAGE_000 = 0,
MMC_SIGNAL_VOLTAGE_120 = 1,
MMC_SIGNAL_VOLTAGE_180 = 2,
MMC_SIGNAL_VOLTAGE_330 = 4,
};
#define MMC_ALL_SIGNAL_VOLTAGE (MMC_SIGNAL_VOLTAGE_120 |\
MMC_SIGNAL_VOLTAGE_180 |\
MMC_SIGNAL_VOLTAGE_330)
/* Maximum block size for MMC */
#define MMC_MAX_BLOCK_LEN 512
/* The number of MMC physical partitions. These consist of:
* boot partitions (2), general purpose partitions (4) in MMC v4.4.
*/
#define MMC_NUM_BOOT_PARTITION 2
#define MMC_PART_RPMB 3 /* RPMB partition number */
/* Driver model support */
/**
* struct mmc_uclass_priv - Holds information about a device used by the uclass
*/
struct mmc_uclass_priv {
struct mmc *mmc;
};
/**
* mmc_get_mmc_dev() - get the MMC struct pointer for a device
*
* Provided that the device is already probed and ready for use, this value
* will be available.
*
* @dev: Device
* @return associated mmc struct pointer if available, else NULL
*/
struct mmc *mmc_get_mmc_dev(struct udevice *dev);
/* End of driver model support */
struct mmc_cid {
unsigned long psn;
unsigned short oid;
unsigned char mid;
unsigned char prv;
unsigned char mdt;
char pnm[7];
};
struct mmc_cmd {
ushort cmdidx;
uint resp_type;
uint cmdarg;
uint response[4];
};
struct mmc_data {
union {
char *dest;
const char *src; /* src buffers don't get written to */
};
uint flags;
uint blocks;
uint blocksize;
};
/* forward decl. */
struct mmc;
#if CONFIG_IS_ENABLED(DM_MMC)
struct dm_mmc_ops {
/**
* send_cmd() - Send a command to the MMC device
*
* @dev: Device to receive the command
* @cmd: Command to send
* @data: Additional data to send/receive
* @return 0 if OK, -ve on error
*/
int (*send_cmd)(struct udevice *dev, struct mmc_cmd *cmd,
struct mmc_data *data);
/**
* set_ios() - Set the I/O speed/width for an MMC device
*
* @dev: Device to update
* @return 0 if OK, -ve on error
*/
int (*set_ios)(struct udevice *dev);
/**
* send_init_stream() - send the initialization stream: 74 clock cycles
* This is used after power up before sending the first command
*
* @dev: Device to update
*/
void (*send_init_stream)(struct udevice *dev);
/**
* get_cd() - See whether a card is present
*
* @dev: Device to check
* @return 0 if not present, 1 if present, -ve on error
*/
int (*get_cd)(struct udevice *dev);
/**
* get_wp() - See whether a card has write-protect enabled
*
* @dev: Device to check
* @return 0 if write-enabled, 1 if write-protected, -ve on error
*/
int (*get_wp)(struct udevice *dev);
#ifdef MMC_SUPPORTS_TUNING
/**
* execute_tuning() - Start the tuning process
*
* @dev: Device to start the tuning
* @opcode: Command opcode to send
* @return 0 if OK, -ve on error
*/
int (*execute_tuning)(struct udevice *dev, uint opcode);
#endif
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
/**
* wait_dat0() - wait until dat0 is in the target state
* (CLK must be running during the wait)
*
* @dev: Device to check
* @state: target state
* @timeout: timeout in us
* @return 0 if dat0 is in the target state, -ve on error
*/
int (*wait_dat0)(struct udevice *dev, int state, int timeout);
#endif
};
#define mmc_get_ops(dev) ((struct dm_mmc_ops *)(dev)->driver->ops)
int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
struct mmc_data *data);
int dm_mmc_set_ios(struct udevice *dev);
void dm_mmc_send_init_stream(struct udevice *dev);
int dm_mmc_get_cd(struct udevice *dev);
int dm_mmc_get_wp(struct udevice *dev);
int dm_mmc_execute_tuning(struct udevice *dev, uint opcode);
int dm_mmc_wait_dat0(struct udevice *dev, int state, int timeout);
/* Transition functions for compatibility */
int mmc_set_ios(struct mmc *mmc);
void mmc_send_init_stream(struct mmc *mmc);
int mmc_getcd(struct mmc *mmc);
int mmc_getwp(struct mmc *mmc);
int mmc_execute_tuning(struct mmc *mmc, uint opcode);
int mmc_wait_dat0(struct mmc *mmc, int state, int timeout);
#else
struct mmc_ops {
int (*send_cmd)(struct mmc *mmc,
struct mmc_cmd *cmd, struct mmc_data *data);
int (*set_ios)(struct mmc *mmc);
int (*init)(struct mmc *mmc);
int (*getcd)(struct mmc *mmc);
int (*getwp)(struct mmc *mmc);
};
#endif
struct mmc_config {
const char *name;
#if !CONFIG_IS_ENABLED(DM_MMC)
const struct mmc_ops *ops;
#endif
uint host_caps;
uint voltages;
uint f_min;
uint f_max;
uint b_max;
unsigned char part_type;
};
struct sd_ssr {
unsigned int au; /* In sectors */
unsigned int erase_timeout; /* In milliseconds */
unsigned int erase_offset; /* In milliseconds */
};
enum bus_mode {
MMC_LEGACY,
SD_LEGACY,
MMC_HS,
SD_HS,
MMC_HS_52,
MMC_DDR_52,
UHS_SDR12,
UHS_SDR25,
UHS_SDR50,
UHS_DDR50,
UHS_SDR104,
MMC_HS_200,
MMC_HS_400,
MMC_MODES_END
};
const char *mmc_mode_name(enum bus_mode mode);
void mmc_dump_capabilities(const char *text, uint caps);
static inline bool mmc_is_mode_ddr(enum bus_mode mode)
{
if (mode == MMC_DDR_52)
return true;
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
else if (mode == UHS_DDR50)
return true;
#endif
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
else if (mode == MMC_HS_400)
return true;
#endif
else
return false;
}
#define UHS_CAPS (MMC_CAP(UHS_SDR12) | MMC_CAP(UHS_SDR25) | \
MMC_CAP(UHS_SDR50) | MMC_CAP(UHS_SDR104) | \
MMC_CAP(UHS_DDR50))
static inline bool supports_uhs(uint caps)
{
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
return (caps & UHS_CAPS) ? true : false;
#else
return false;
#endif
}
/*
* With CONFIG_DM_MMC enabled, struct mmc can be accessed from the MMC device
* with mmc_get_mmc_dev().
*
* TODO struct mmc should be in mmc_private but it's hard to fix right now
*/
struct mmc {
#if !CONFIG_IS_ENABLED(BLK)
struct list_head link;
#endif
const struct mmc_config *cfg; /* provided configuration */
uint version;
void *priv;
uint has_init;
int high_capacity;
bool clk_disable; /* true if the clock can be turned off */
uint bus_width;
uint clock;
enum mmc_voltage signal_voltage;
uint card_caps;
uint host_caps;
uint ocr;
uint dsr;
uint dsr_imp;
uint scr[2];
uint csd[4];
uint cid[4];
ushort rca;
u8 part_support;
u8 part_attr;
u8 wr_rel_set;
u8 part_config;
uint tran_speed;
uint legacy_speed; /* speed for the legacy mode provided by the card */
uint read_bl_len;
#if CONFIG_IS_ENABLED(MMC_WRITE)
uint write_bl_len;
uint erase_grp_size; /* in 512-byte sectors */
#endif
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
uint hc_wp_grp_size; /* in 512-byte sectors */
#endif
#if CONFIG_IS_ENABLED(MMC_WRITE)
struct sd_ssr ssr; /* SD status register */
#endif
u64 capacity;
u64 capacity_user;
u64 capacity_boot;
u64 capacity_rpmb;
u64 capacity_gp[4];
#ifndef CONFIG_SPL_BUILD
u64 enh_user_start;
u64 enh_user_size;
#endif
#if !CONFIG_IS_ENABLED(BLK)
struct blk_desc block_dev;
#endif
char op_cond_pending; /* 1 if we are waiting on an op_cond command */
char init_in_progress; /* 1 if we have done mmc_start_init() */
char preinit; /* start init as early as possible */
int ddr_mode;
#if CONFIG_IS_ENABLED(DM_MMC)
struct udevice *dev; /* Device for this MMC controller */
#if CONFIG_IS_ENABLED(DM_REGULATOR)
struct udevice *vmmc_supply; /* Main voltage regulator (Vcc)*/
struct udevice *vqmmc_supply; /* IO voltage regulator (Vccq)*/
#endif
#endif
u8 *ext_csd;
u32 cardtype; /* cardtype read from the MMC */
enum mmc_voltage current_voltage;
enum bus_mode selected_mode; /* mode currently used */
enum bus_mode best_mode; /* best mode is the supported mode with the
* highest bandwidth. It may not always be the
* operating mode due to limitations when
* accessing the boot partitions
*/
u32 quirks;
};
struct mmc_hwpart_conf {
struct {
uint enh_start; /* in 512-byte sectors */
uint enh_size; /* in 512-byte sectors, if 0 no enh area */
unsigned wr_rel_change : 1;
unsigned wr_rel_set : 1;
} user;
struct {
uint size; /* in 512-byte sectors */
unsigned enhanced : 1;
unsigned wr_rel_change : 1;
unsigned wr_rel_set : 1;
} gp_part[4];
};
enum mmc_hwpart_conf_mode {
MMC_HWPART_CONF_CHECK,
MMC_HWPART_CONF_SET,
MMC_HWPART_CONF_COMPLETE,
};
struct mmc *mmc_create(const struct mmc_config *cfg, void *priv);
/**
* mmc_bind() - Set up a new MMC device ready for probing
*
* A child block device is bound with the IF_TYPE_MMC interface type. This
* allows the device to be used with CONFIG_BLK
*
* @dev: MMC device to set up
* @mmc: MMC struct
* @cfg: MMC configuration
* @return 0 if OK, -ve on error
*/
int mmc_bind(struct udevice *dev, struct mmc *mmc,
const struct mmc_config *cfg);
void mmc_destroy(struct mmc *mmc);
/**
* mmc_unbind() - Unbind a MMC device's child block device
*
* @dev: MMC device
* @return 0 if OK, -ve on error
*/
int mmc_unbind(struct udevice *dev);
int mmc_initialize(bd_t *bis);
int mmc_init(struct mmc *mmc);
int mmc_send_tuning(struct mmc *mmc, u32 opcode, int *cmd_error);
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT) || \
CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \
CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
int mmc_deinit(struct mmc *mmc);
#endif
/**
* mmc_of_parse() - Parse the device tree to get the capabilities of the host
*
* @dev: MMC device
* @cfg: MMC configuration
* @return 0 if OK, -ve on error
*/
int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg);
int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size);
/**
* mmc_voltage_to_mv() - Convert a mmc_voltage in mV
*
* @voltage: The mmc_voltage to convert
* @return the value in mV if OK, -EINVAL on error (invalid mmc_voltage value)
*/
int mmc_voltage_to_mv(enum mmc_voltage voltage);
/**
* mmc_set_clock() - change the bus clock
* @mmc: MMC struct
* @clock: bus frequency in Hz
* @disable: flag indicating if the clock must on or off
* @return 0 if OK, -ve on error
*/
int mmc_set_clock(struct mmc *mmc, uint clock, bool disable);
#define MMC_CLK_ENABLE false
#define MMC_CLK_DISABLE true
struct mmc *find_mmc_device(int dev_num);
int mmc_set_dev(int dev_num);
void print_mmc_devices(char separator);
/**
* get_mmc_num() - get the total MMC device number
*
* @return 0 if there is no MMC device, else the number of devices
*/
int get_mmc_num(void);
int mmc_switch_part(struct mmc *mmc, unsigned int part_num);
int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf,
enum mmc_hwpart_conf_mode mode);
#if !CONFIG_IS_ENABLED(DM_MMC)
int mmc_getcd(struct mmc *mmc);
int board_mmc_getcd(struct mmc *mmc);
int mmc_getwp(struct mmc *mmc);
int board_mmc_getwp(struct mmc *mmc);
#endif
int mmc_set_dsr(struct mmc *mmc, u16 val);
/* Function to change the size of boot partition and rpmb partitions */
int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
unsigned long rpmbsize);
/* Function to modify the PARTITION_CONFIG field of EXT_CSD */
int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
/* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */
int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode);
/* Function to modify the RST_n_FUNCTION field of EXT_CSD */
int mmc_set_rst_n_function(struct mmc *mmc, u8 enable);
/* Functions to read / write the RPMB partition */
int mmc_rpmb_set_key(struct mmc *mmc, void *key);
int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter);
int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk,
unsigned short cnt, unsigned char *key);
int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,
unsigned short cnt, unsigned char *key);
/**
* mmc_rpmb_route_frames() - route RPMB data frames
* @mmc Pointer to a MMC device struct
* @req Request data frames
* @reqlen Length of data frames in bytes
* @rsp Supplied buffer for response data frames
* @rsplen Length of supplied buffer for response data frames
*
* The RPMB data frames are routed to/from some external entity, for
* example a Trusted Exectuion Environment in an arm TrustZone protected
* secure world. It's expected that it's the external entity who is in
* control of the RPMB key.
*
* Returns 0 on success, < 0 on error.
*/
int mmc_rpmb_route_frames(struct mmc *mmc, void *req, unsigned long reqlen,
void *rsp, unsigned long rsplen);
#ifdef CONFIG_CMD_BKOPS_ENABLE
int mmc_set_bkops_enable(struct mmc *mmc);
#endif
/**
* Start device initialization and return immediately; it does not block on
* polling OCR (operation condition register) status. Useful for checking
* the presence of SD/eMMC when no card detect logic is available.
*
* @param mmc Pointer to a MMC device struct
* @return 0 on success, <0 on error.
*/
int mmc_get_op_cond(struct mmc *mmc);
/**
* Start device initialization and return immediately; it does not block on
* polling OCR (operation condition register) status. Then you should call
* mmc_init, which would block on polling OCR status and complete the device
* initializatin.
*
* @param mmc Pointer to a MMC device struct
* @return 0 on success, <0 on error.
*/
int mmc_start_init(struct mmc *mmc);
/**
* Set preinit flag of mmc device.
*
* This will cause the device to be pre-inited during mmc_initialize(),
* which may save boot time if the device is not accessed until later.
* Some eMMC devices take 200-300ms to init, but unfortunately they
* must be sent a series of commands to even get them to start preparing
* for operation.
*
* @param mmc Pointer to a MMC device struct
* @param preinit preinit flag value
*/
void mmc_set_preinit(struct mmc *mmc, int preinit);
#ifdef CONFIG_MMC_SPI
#define mmc_host_is_spi(mmc) ((mmc)->cfg->host_caps & MMC_MODE_SPI)
#else
#define mmc_host_is_spi(mmc) 0
#endif
struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
void board_mmc_power_init(void);
int board_mmc_init(bd_t *bis);
int cpu_mmc_init(bd_t *bis);
int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);
# ifdef CONFIG_SYS_MMC_ENV_PART
extern uint mmc_get_env_part(struct mmc *mmc);
# endif
int mmc_get_env_dev(void);
/* Set block count limit because of 16 bit register limit on some hardware*/
#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535
#endif
/**
* mmc_get_blk_desc() - Get the block descriptor for an MMC device
*
* @mmc: MMC device
* @return block device if found, else NULL
*/
struct blk_desc *mmc_get_blk_desc(struct mmc *mmc);
#endif /* _MMC_H_ */
Reference in a new issue View git blame Copy permalink