mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
c32449a161
Add i.MXRT compatible string and cpu type support to lpuart driver, to use little endian 32 bits configurations. Also according to RM, the Receive RX FIFO Enable (RXFE) field in LPUART FIFO register is bit 3, so this definition should change to 0x08 as done for i.MX8. It needs also to set baudrate the same way as i.MX8 does. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
570 lines
13 KiB
C
570 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2019 NXP
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <fsl_lpuart.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <serial.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/clock.h>
|
|
|
|
#define US1_TDRE (1 << 7)
|
|
#define US1_RDRF (1 << 5)
|
|
#define US1_OR (1 << 3)
|
|
#define UC2_TE (1 << 3)
|
|
#define UC2_RE (1 << 2)
|
|
#define CFIFO_TXFLUSH (1 << 7)
|
|
#define CFIFO_RXFLUSH (1 << 6)
|
|
#define SFIFO_RXOF (1 << 2)
|
|
#define SFIFO_RXUF (1 << 0)
|
|
|
|
#define STAT_LBKDIF (1 << 31)
|
|
#define STAT_RXEDGIF (1 << 30)
|
|
#define STAT_TDRE (1 << 23)
|
|
#define STAT_RDRF (1 << 21)
|
|
#define STAT_IDLE (1 << 20)
|
|
#define STAT_OR (1 << 19)
|
|
#define STAT_NF (1 << 18)
|
|
#define STAT_FE (1 << 17)
|
|
#define STAT_PF (1 << 16)
|
|
#define STAT_MA1F (1 << 15)
|
|
#define STAT_MA2F (1 << 14)
|
|
#define STAT_FLAGS (STAT_LBKDIF | STAT_RXEDGIF | STAT_IDLE | STAT_OR | \
|
|
STAT_NF | STAT_FE | STAT_PF | STAT_MA1F | STAT_MA2F)
|
|
|
|
#define CTRL_TE (1 << 19)
|
|
#define CTRL_RE (1 << 18)
|
|
|
|
#define FIFO_RXFLUSH BIT(14)
|
|
#define FIFO_TXFLUSH BIT(15)
|
|
#define FIFO_TXSIZE_MASK 0x70
|
|
#define FIFO_TXSIZE_OFF 4
|
|
#define FIFO_RXSIZE_MASK 0x7
|
|
#define FIFO_RXSIZE_OFF 0
|
|
#define FIFO_TXFE 0x80
|
|
#if defined(CONFIG_ARCH_IMX8) || defined(CONFIG_ARCH_IMXRT)
|
|
#define FIFO_RXFE 0x08
|
|
#else
|
|
#define FIFO_RXFE 0x40
|
|
#endif
|
|
|
|
#define WATER_TXWATER_OFF 0
|
|
#define WATER_RXWATER_OFF 16
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define LPUART_FLAG_REGMAP_32BIT_REG BIT(0)
|
|
#define LPUART_FLAG_REGMAP_ENDIAN_BIG BIT(1)
|
|
|
|
enum lpuart_devtype {
|
|
DEV_VF610 = 1,
|
|
DEV_LS1021A,
|
|
DEV_MX7ULP,
|
|
DEV_IMX8,
|
|
DEV_IMXRT,
|
|
};
|
|
|
|
struct lpuart_serial_platdata {
|
|
void *reg;
|
|
enum lpuart_devtype devtype;
|
|
ulong flags;
|
|
};
|
|
|
|
static void lpuart_read32(u32 flags, u32 *addr, u32 *val)
|
|
{
|
|
if (flags & LPUART_FLAG_REGMAP_32BIT_REG) {
|
|
if (flags & LPUART_FLAG_REGMAP_ENDIAN_BIG)
|
|
*(u32 *)val = in_be32(addr);
|
|
else
|
|
*(u32 *)val = in_le32(addr);
|
|
}
|
|
}
|
|
|
|
static void lpuart_write32(u32 flags, u32 *addr, u32 val)
|
|
{
|
|
if (flags & LPUART_FLAG_REGMAP_32BIT_REG) {
|
|
if (flags & LPUART_FLAG_REGMAP_ENDIAN_BIG)
|
|
out_be32(addr, val);
|
|
else
|
|
out_le32(addr, val);
|
|
}
|
|
}
|
|
|
|
|
|
#ifndef CONFIG_SYS_CLK_FREQ
|
|
#define CONFIG_SYS_CLK_FREQ 0
|
|
#endif
|
|
|
|
u32 __weak get_lpuart_clk(void)
|
|
{
|
|
return CONFIG_SYS_CLK_FREQ;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
static int get_lpuart_clk_rate(struct udevice *dev, u32 *clk)
|
|
{
|
|
struct clk per_clk;
|
|
ulong rate;
|
|
int ret;
|
|
|
|
ret = clk_get_by_name(dev, "per", &per_clk);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to get per clk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
rate = clk_get_rate(&per_clk);
|
|
if ((long)rate <= 0) {
|
|
dev_err(dev, "Failed to get per clk rate: %ld\n", (long)rate);
|
|
return ret;
|
|
}
|
|
*clk = rate;
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int get_lpuart_clk_rate(struct udevice *dev, u32 *clk)
|
|
{ return -ENOSYS; }
|
|
#endif
|
|
|
|
static bool is_lpuart32(struct udevice *dev)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
|
|
return plat->flags & LPUART_FLAG_REGMAP_32BIT_REG;
|
|
}
|
|
|
|
static void _lpuart_serial_setbrg(struct udevice *dev,
|
|
int baudrate)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
|
|
struct lpuart_fsl *base = plat->reg;
|
|
u32 clk;
|
|
u16 sbr;
|
|
int ret;
|
|
|
|
if (CONFIG_IS_ENABLED(CLK)) {
|
|
ret = get_lpuart_clk_rate(dev, &clk);
|
|
if (ret)
|
|
return;
|
|
} else {
|
|
clk = get_lpuart_clk();
|
|
}
|
|
|
|
sbr = (u16)(clk / (16 * baudrate));
|
|
|
|
/* place adjustment later - n/32 BRFA */
|
|
__raw_writeb(sbr >> 8, &base->ubdh);
|
|
__raw_writeb(sbr & 0xff, &base->ubdl);
|
|
}
|
|
|
|
static int _lpuart_serial_getc(struct lpuart_serial_platdata *plat)
|
|
{
|
|
struct lpuart_fsl *base = plat->reg;
|
|
while (!(__raw_readb(&base->us1) & (US1_RDRF | US1_OR)))
|
|
WATCHDOG_RESET();
|
|
|
|
barrier();
|
|
|
|
return __raw_readb(&base->ud);
|
|
}
|
|
|
|
static void _lpuart_serial_putc(struct lpuart_serial_platdata *plat,
|
|
const char c)
|
|
{
|
|
struct lpuart_fsl *base = plat->reg;
|
|
|
|
while (!(__raw_readb(&base->us1) & US1_TDRE))
|
|
WATCHDOG_RESET();
|
|
|
|
__raw_writeb(c, &base->ud);
|
|
}
|
|
|
|
/* Test whether a character is in the RX buffer */
|
|
static int _lpuart_serial_tstc(struct lpuart_serial_platdata *plat)
|
|
{
|
|
struct lpuart_fsl *base = plat->reg;
|
|
|
|
if (__raw_readb(&base->urcfifo) == 0)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Initialise the serial port with the given baudrate. The settings
|
|
* are always 8 data bits, no parity, 1 stop bit, no start bits.
|
|
*/
|
|
static int _lpuart_serial_init(struct udevice *dev)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
|
|
struct lpuart_fsl *base = (struct lpuart_fsl *)plat->reg;
|
|
u8 ctrl;
|
|
|
|
ctrl = __raw_readb(&base->uc2);
|
|
ctrl &= ~UC2_RE;
|
|
ctrl &= ~UC2_TE;
|
|
__raw_writeb(ctrl, &base->uc2);
|
|
|
|
__raw_writeb(0, &base->umodem);
|
|
__raw_writeb(0, &base->uc1);
|
|
|
|
/* Disable FIFO and flush buffer */
|
|
__raw_writeb(0x0, &base->upfifo);
|
|
__raw_writeb(0x0, &base->utwfifo);
|
|
__raw_writeb(0x1, &base->urwfifo);
|
|
__raw_writeb(CFIFO_TXFLUSH | CFIFO_RXFLUSH, &base->ucfifo);
|
|
|
|
/* provide data bits, parity, stop bit, etc */
|
|
_lpuart_serial_setbrg(dev, gd->baudrate);
|
|
|
|
__raw_writeb(UC2_RE | UC2_TE, &base->uc2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void _lpuart32_serial_setbrg_7ulp(struct udevice *dev,
|
|
int baudrate)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
|
|
struct lpuart_fsl_reg32 *base = plat->reg;
|
|
u32 sbr, osr, baud_diff, tmp_osr, tmp_sbr, tmp_diff, tmp;
|
|
u32 clk;
|
|
int ret;
|
|
|
|
if (CONFIG_IS_ENABLED(CLK)) {
|
|
ret = get_lpuart_clk_rate(dev, &clk);
|
|
if (ret)
|
|
return;
|
|
} else {
|
|
clk = get_lpuart_clk();
|
|
}
|
|
|
|
baud_diff = baudrate;
|
|
osr = 0;
|
|
sbr = 0;
|
|
|
|
for (tmp_osr = 4; tmp_osr <= 32; tmp_osr++) {
|
|
tmp_sbr = (clk / (baudrate * tmp_osr));
|
|
|
|
if (tmp_sbr == 0)
|
|
tmp_sbr = 1;
|
|
|
|
/*calculate difference in actual buad w/ current values */
|
|
tmp_diff = (clk / (tmp_osr * tmp_sbr));
|
|
tmp_diff = tmp_diff - baudrate;
|
|
|
|
/* select best values between sbr and sbr+1 */
|
|
if (tmp_diff > (baudrate - (clk / (tmp_osr * (tmp_sbr + 1))))) {
|
|
tmp_diff = baudrate - (clk / (tmp_osr * (tmp_sbr + 1)));
|
|
tmp_sbr++;
|
|
}
|
|
|
|
if (tmp_diff <= baud_diff) {
|
|
baud_diff = tmp_diff;
|
|
osr = tmp_osr;
|
|
sbr = tmp_sbr;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* TODO: handle buadrate outside acceptable rate
|
|
* if (baudDiff > ((config->baudRate_Bps / 100) * 3))
|
|
* {
|
|
* Unacceptable baud rate difference of more than 3%
|
|
* return kStatus_LPUART_BaudrateNotSupport;
|
|
* }
|
|
*/
|
|
tmp = in_le32(&base->baud);
|
|
|
|
if ((osr > 3) && (osr < 8))
|
|
tmp |= LPUART_BAUD_BOTHEDGE_MASK;
|
|
|
|
tmp &= ~LPUART_BAUD_OSR_MASK;
|
|
tmp |= LPUART_BAUD_OSR(osr-1);
|
|
|
|
tmp &= ~LPUART_BAUD_SBR_MASK;
|
|
tmp |= LPUART_BAUD_SBR(sbr);
|
|
|
|
/* explicitly disable 10 bit mode & set 1 stop bit */
|
|
tmp &= ~(LPUART_BAUD_M10_MASK | LPUART_BAUD_SBNS_MASK);
|
|
|
|
out_le32(&base->baud, tmp);
|
|
}
|
|
|
|
static void _lpuart32_serial_setbrg(struct udevice *dev,
|
|
int baudrate)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
|
|
struct lpuart_fsl_reg32 *base = plat->reg;
|
|
u32 clk;
|
|
u32 sbr;
|
|
int ret;
|
|
|
|
if (CONFIG_IS_ENABLED(CLK)) {
|
|
ret = get_lpuart_clk_rate(dev, &clk);
|
|
if (ret)
|
|
return;
|
|
} else {
|
|
clk = get_lpuart_clk();
|
|
}
|
|
|
|
sbr = (clk / (16 * baudrate));
|
|
|
|
/* place adjustment later - n/32 BRFA */
|
|
lpuart_write32(plat->flags, &base->baud, sbr);
|
|
}
|
|
|
|
static int _lpuart32_serial_getc(struct lpuart_serial_platdata *plat)
|
|
{
|
|
struct lpuart_fsl_reg32 *base = plat->reg;
|
|
u32 stat, val;
|
|
|
|
lpuart_read32(plat->flags, &base->stat, &stat);
|
|
while ((stat & STAT_RDRF) == 0) {
|
|
lpuart_write32(plat->flags, &base->stat, STAT_FLAGS);
|
|
WATCHDOG_RESET();
|
|
lpuart_read32(plat->flags, &base->stat, &stat);
|
|
}
|
|
|
|
lpuart_read32(plat->flags, &base->data, &val);
|
|
|
|
lpuart_read32(plat->flags, &base->stat, &stat);
|
|
if (stat & STAT_OR)
|
|
lpuart_write32(plat->flags, &base->stat, STAT_OR);
|
|
|
|
return val & 0x3ff;
|
|
}
|
|
|
|
static void _lpuart32_serial_putc(struct lpuart_serial_platdata *plat,
|
|
const char c)
|
|
{
|
|
struct lpuart_fsl_reg32 *base = plat->reg;
|
|
u32 stat;
|
|
|
|
if (c == '\n')
|
|
serial_putc('\r');
|
|
|
|
while (true) {
|
|
lpuart_read32(plat->flags, &base->stat, &stat);
|
|
|
|
if ((stat & STAT_TDRE))
|
|
break;
|
|
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
lpuart_write32(plat->flags, &base->data, c);
|
|
}
|
|
|
|
/* Test whether a character is in the RX buffer */
|
|
static int _lpuart32_serial_tstc(struct lpuart_serial_platdata *plat)
|
|
{
|
|
struct lpuart_fsl_reg32 *base = plat->reg;
|
|
u32 water;
|
|
|
|
lpuart_read32(plat->flags, &base->water, &water);
|
|
|
|
if ((water >> 24) == 0)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Initialise the serial port with the given baudrate. The settings
|
|
* are always 8 data bits, no parity, 1 stop bit, no start bits.
|
|
*/
|
|
static int _lpuart32_serial_init(struct udevice *dev)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
|
|
struct lpuart_fsl_reg32 *base = (struct lpuart_fsl_reg32 *)plat->reg;
|
|
u32 val, tx_fifo_size;
|
|
|
|
lpuart_read32(plat->flags, &base->ctrl, &val);
|
|
val &= ~CTRL_RE;
|
|
val &= ~CTRL_TE;
|
|
lpuart_write32(plat->flags, &base->ctrl, val);
|
|
|
|
lpuart_write32(plat->flags, &base->modir, 0);
|
|
|
|
lpuart_read32(plat->flags, &base->fifo, &val);
|
|
tx_fifo_size = (val & FIFO_TXSIZE_MASK) >> FIFO_TXSIZE_OFF;
|
|
/* Set the TX water to half of FIFO size */
|
|
if (tx_fifo_size > 1)
|
|
tx_fifo_size = tx_fifo_size >> 1;
|
|
|
|
/* Set RX water to 0, to be triggered by any receive data */
|
|
lpuart_write32(plat->flags, &base->water,
|
|
(tx_fifo_size << WATER_TXWATER_OFF));
|
|
|
|
/* Enable TX and RX FIFO */
|
|
val |= (FIFO_TXFE | FIFO_RXFE | FIFO_TXFLUSH | FIFO_RXFLUSH);
|
|
lpuart_write32(plat->flags, &base->fifo, val);
|
|
|
|
lpuart_write32(plat->flags, &base->match, 0);
|
|
|
|
if (plat->devtype == DEV_MX7ULP || plat->devtype == DEV_IMX8 ||
|
|
plat->devtype == DEV_IMXRT) {
|
|
_lpuart32_serial_setbrg_7ulp(dev, gd->baudrate);
|
|
} else {
|
|
/* provide data bits, parity, stop bit, etc */
|
|
_lpuart32_serial_setbrg(dev, gd->baudrate);
|
|
}
|
|
|
|
lpuart_write32(plat->flags, &base->ctrl, CTRL_RE | CTRL_TE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpuart_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
|
|
|
|
if (is_lpuart32(dev)) {
|
|
if (plat->devtype == DEV_MX7ULP || plat->devtype == DEV_IMX8 ||
|
|
plat->devtype == DEV_IMXRT)
|
|
_lpuart32_serial_setbrg_7ulp(dev, baudrate);
|
|
else
|
|
_lpuart32_serial_setbrg(dev, baudrate);
|
|
} else {
|
|
_lpuart_serial_setbrg(dev, baudrate);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpuart_serial_getc(struct udevice *dev)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
|
|
if (is_lpuart32(dev))
|
|
return _lpuart32_serial_getc(plat);
|
|
|
|
return _lpuart_serial_getc(plat);
|
|
}
|
|
|
|
static int lpuart_serial_putc(struct udevice *dev, const char c)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
|
|
if (is_lpuart32(dev))
|
|
_lpuart32_serial_putc(plat, c);
|
|
else
|
|
_lpuart_serial_putc(plat, c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpuart_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
struct lpuart_fsl *reg = plat->reg;
|
|
struct lpuart_fsl_reg32 *reg32 = plat->reg;
|
|
u32 stat;
|
|
|
|
if (is_lpuart32(dev)) {
|
|
if (input) {
|
|
return _lpuart32_serial_tstc(plat);
|
|
} else {
|
|
lpuart_read32(plat->flags, ®32->stat, &stat);
|
|
return stat & STAT_TDRE ? 0 : 1;
|
|
}
|
|
}
|
|
|
|
if (input)
|
|
return _lpuart_serial_tstc(plat);
|
|
else
|
|
return __raw_readb(®->us1) & US1_TDRE ? 0 : 1;
|
|
}
|
|
|
|
static int lpuart_serial_probe(struct udevice *dev)
|
|
{
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
struct clk per_clk;
|
|
int ret;
|
|
|
|
ret = clk_get_by_name(dev, "per", &per_clk);
|
|
if (!ret) {
|
|
ret = clk_enable(&per_clk);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to get per clk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
} else {
|
|
dev_warn(dev, "Failed to get per clk: %d\n", ret);
|
|
}
|
|
#endif
|
|
|
|
if (is_lpuart32(dev))
|
|
return _lpuart32_serial_init(dev);
|
|
else
|
|
return _lpuart_serial_init(dev);
|
|
}
|
|
|
|
static int lpuart_serial_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct lpuart_serial_platdata *plat = dev->platdata;
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(dev);
|
|
fdt_addr_t addr;
|
|
|
|
addr = devfdt_get_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
plat->reg = (void *)addr;
|
|
plat->flags = dev_get_driver_data(dev);
|
|
|
|
if (fdtdec_get_bool(blob, node, "little-endian"))
|
|
plat->flags &= ~LPUART_FLAG_REGMAP_ENDIAN_BIG;
|
|
|
|
if (!fdt_node_check_compatible(blob, node, "fsl,ls1021a-lpuart"))
|
|
plat->devtype = DEV_LS1021A;
|
|
else if (!fdt_node_check_compatible(blob, node, "fsl,imx7ulp-lpuart"))
|
|
plat->devtype = DEV_MX7ULP;
|
|
else if (!fdt_node_check_compatible(blob, node, "fsl,vf610-lpuart"))
|
|
plat->devtype = DEV_VF610;
|
|
else if (!fdt_node_check_compatible(blob, node, "fsl,imx8qm-lpuart"))
|
|
plat->devtype = DEV_IMX8;
|
|
else if (!fdt_node_check_compatible(blob, node, "fsl,imxrt-lpuart"))
|
|
plat->devtype = DEV_IMXRT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_serial_ops lpuart_serial_ops = {
|
|
.putc = lpuart_serial_putc,
|
|
.pending = lpuart_serial_pending,
|
|
.getc = lpuart_serial_getc,
|
|
.setbrg = lpuart_serial_setbrg,
|
|
};
|
|
|
|
static const struct udevice_id lpuart_serial_ids[] = {
|
|
{ .compatible = "fsl,ls1021a-lpuart", .data =
|
|
LPUART_FLAG_REGMAP_32BIT_REG | LPUART_FLAG_REGMAP_ENDIAN_BIG },
|
|
{ .compatible = "fsl,imx7ulp-lpuart",
|
|
.data = LPUART_FLAG_REGMAP_32BIT_REG },
|
|
{ .compatible = "fsl,vf610-lpuart"},
|
|
{ .compatible = "fsl,imx8qm-lpuart",
|
|
.data = LPUART_FLAG_REGMAP_32BIT_REG },
|
|
{ .compatible = "fsl,imxrt-lpuart",
|
|
.data = LPUART_FLAG_REGMAP_32BIT_REG },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_lpuart) = {
|
|
.name = "serial_lpuart",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = lpuart_serial_ids,
|
|
.ofdata_to_platdata = lpuart_serial_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct lpuart_serial_platdata),
|
|
.probe = lpuart_serial_probe,
|
|
.ops = &lpuart_serial_ops,
|
|
};
|