u-boot/board/kosagi/novena/video.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

455 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Novena video output support
*
* IT6251 code based on code Copyright (C) 2014 Sean Cross
* from https://github.com/xobs/novena-linux.git commit
* 3d85836ee1377d445531928361809612aa0a18db
*
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
*/
#include <common.h>
#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/video.h>
#include <i2c.h>
#include <input.h>
#include <ipu_pixfmt.h>
#include <linux/fb.h>
#include <linux/input.h>
#include <malloc.h>
#include <stdio_dev.h>
#include "novena.h"
#define IT6251_VENDOR_ID_LOW 0x00
#define IT6251_VENDOR_ID_HIGH 0x01
#define IT6251_DEVICE_ID_LOW 0x02
#define IT6251_DEVICE_ID_HIGH 0x03
#define IT6251_SYSTEM_STATUS 0x0d
#define IT6251_SYSTEM_STATUS_RINTSTATUS (1 << 0)
#define IT6251_SYSTEM_STATUS_RHPDSTATUS (1 << 1)
#define IT6251_SYSTEM_STATUS_RVIDEOSTABLE (1 << 2)
#define IT6251_SYSTEM_STATUS_RPLL_IOLOCK (1 << 3)
#define IT6251_SYSTEM_STATUS_RPLL_XPLOCK (1 << 4)
#define IT6251_SYSTEM_STATUS_RPLL_SPLOCK (1 << 5)
#define IT6251_SYSTEM_STATUS_RAUXFREQ_LOCK (1 << 6)
#define IT6251_REF_STATE 0x0e
#define IT6251_REF_STATE_MAIN_LINK_DISABLED (1 << 0)
#define IT6251_REF_STATE_AUX_CHANNEL_READ (1 << 1)
#define IT6251_REF_STATE_CR_PATTERN (1 << 2)
#define IT6251_REF_STATE_EQ_PATTERN (1 << 3)
#define IT6251_REF_STATE_NORMAL_OPERATION (1 << 4)
#define IT6251_REF_STATE_MUTED (1 << 5)
#define IT6251_REG_PCLK_CNT_LOW 0x57
#define IT6251_REG_PCLK_CNT_HIGH 0x58
#define IT6521_RETRY_MAX 20
static int it6251_is_stable(void)
{
const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
const unsigned int laddr = NOVENA_IT6251_LVDSADDR;
int status;
int clkcnt;
int rpclkcnt;
int refstate;
rpclkcnt = (i2c_reg_read(caddr, 0x13) & 0xff) |
((i2c_reg_read(caddr, 0x14) << 8) & 0x0f00);
debug("RPCLKCnt: %d\n", rpclkcnt);
status = i2c_reg_read(caddr, IT6251_SYSTEM_STATUS);
debug("System status: 0x%02x\n", status);
clkcnt = (i2c_reg_read(laddr, IT6251_REG_PCLK_CNT_LOW) & 0xff) |
((i2c_reg_read(laddr, IT6251_REG_PCLK_CNT_HIGH) << 8) &
0x0f00);
debug("Clock: 0x%02x\n", clkcnt);
refstate = i2c_reg_read(laddr, IT6251_REF_STATE);
debug("Ref Link State: 0x%02x\n", refstate);
if ((refstate & 0x1f) != 0)
return 0;
/* If video is muted, that's a failure */
if (refstate & IT6251_REF_STATE_MUTED)
return 0;
if (!(status & IT6251_SYSTEM_STATUS_RVIDEOSTABLE))
return 0;
return 1;
}
static int it6251_ready(void)
{
const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
/* Test if the IT6251 came out of reset by reading ID regs. */
if (i2c_reg_read(caddr, IT6251_VENDOR_ID_LOW) != 0x15)
return 0;
if (i2c_reg_read(caddr, IT6251_VENDOR_ID_HIGH) != 0xca)
return 0;
if (i2c_reg_read(caddr, IT6251_DEVICE_ID_LOW) != 0x51)
return 0;
if (i2c_reg_read(caddr, IT6251_DEVICE_ID_HIGH) != 0x62)
return 0;
return 1;
}
static void it6251_program_regs(void)
{
const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
const unsigned int laddr = NOVENA_IT6251_LVDSADDR;
i2c_reg_write(caddr, 0x05, 0x00);
mdelay(1);
/* set LVDSRX address, and enable */
i2c_reg_write(caddr, 0xfd, 0xbc);
i2c_reg_write(caddr, 0xfe, 0x01);
/*
* LVDSRX
*/
/* This write always fails, because the chip goes into reset */
/* reset LVDSRX */
i2c_reg_write(laddr, 0x05, 0xff);
i2c_reg_write(laddr, 0x05, 0x00);
/* reset LVDSRX PLL */
i2c_reg_write(laddr, 0x3b, 0x42);
i2c_reg_write(laddr, 0x3b, 0x43);
/* something with SSC PLL */
i2c_reg_write(laddr, 0x3c, 0x08);
/* don't swap links, but writing reserved registers */
i2c_reg_write(laddr, 0x0b, 0x88);
/* JEIDA, 8-bit depth 0x11, orig 0x42 */
i2c_reg_write(laddr, 0x2c, 0x01);
/* "reserved" */
i2c_reg_write(laddr, 0x32, 0x04);
/* "reserved" */
i2c_reg_write(laddr, 0x35, 0xe0);
/* "reserved" + clock delay */
i2c_reg_write(laddr, 0x2b, 0x24);
/* reset LVDSRX pix clock */
i2c_reg_write(laddr, 0x05, 0x02);
i2c_reg_write(laddr, 0x05, 0x00);
/*
* DPTX
*/
/* set for two lane mode, normal op, no swapping, no downspread */
i2c_reg_write(caddr, 0x16, 0x02);
/* some AUX channel EDID magic */
i2c_reg_write(caddr, 0x23, 0x40);
/* power down lanes 3-0 */
i2c_reg_write(caddr, 0x5c, 0xf3);
/* enable DP scrambling, change EQ CR phase */
i2c_reg_write(caddr, 0x5f, 0x06);
/* color mode RGB, pclk/2 */
i2c_reg_write(caddr, 0x60, 0x02);
/* dual pixel input mode, no EO swap, no RGB swap */
i2c_reg_write(caddr, 0x61, 0x04);
/* M444B24 video format */
i2c_reg_write(caddr, 0x62, 0x01);
/* vesa range / not interlace / vsync high / hsync high */
i2c_reg_write(caddr, 0xa0, 0x0F);
/* hpd event timer set to 1.6-ish ms */
i2c_reg_write(caddr, 0xc9, 0xf5);
/* more reserved magic */
i2c_reg_write(caddr, 0xca, 0x4d);
i2c_reg_write(caddr, 0xcb, 0x37);
/* enhanced framing mode, auto video fifo reset, video mute disable */
i2c_reg_write(caddr, 0xd3, 0x03);
/* "vidstmp" and some reserved stuff */
i2c_reg_write(caddr, 0xd4, 0x45);
/* queue number -- reserved */
i2c_reg_write(caddr, 0xe7, 0xa0);
/* info frame packets and reserved */
i2c_reg_write(caddr, 0xe8, 0x33);
/* more AVI stuff */
i2c_reg_write(caddr, 0xec, 0x00);
/* select PC master reg for aux channel? */
i2c_reg_write(caddr, 0x23, 0x42);
/* send PC request commands */
i2c_reg_write(caddr, 0x24, 0x00);
i2c_reg_write(caddr, 0x25, 0x00);
i2c_reg_write(caddr, 0x26, 0x00);
/* native aux read */
i2c_reg_write(caddr, 0x2b, 0x00);
/* back to internal */
i2c_reg_write(caddr, 0x23, 0x40);
/* voltage swing level 3 */
i2c_reg_write(caddr, 0x19, 0xff);
/* pre-emphasis level 3 */
i2c_reg_write(caddr, 0x1a, 0xff);
/* start link training */
i2c_reg_write(caddr, 0x17, 0x01);
}
static int it6251_init(void)
{
const unsigned int caddr = NOVENA_IT6251_CHIPADDR;
int reg;
int tries, retries = 0;
for (retries = 0; retries < IT6521_RETRY_MAX; retries++) {
/* Program the chip. */
it6251_program_regs();
/* Wait for video stable. */
for (tries = 0; tries < 100; tries++) {
reg = i2c_reg_read(caddr, 0x17);
/* Test Link CFG, STS, LCS read done. */
if ((reg & 0xe0) != 0xe0) {
/* Not yet, wait a bit more. */
mdelay(2);
continue;
}
/* Test if the video input is stable. */
if (it6251_is_stable())
return 0;
}
/*
* If we couldn't stabilize, requeue and try again,
* because it means that the LVDS channel isn't
* stable yet.
*/
printf("Display didn't stabilize.\n");
printf("This may be because the LVDS port is still in powersave mode.\n");
mdelay(50);
}
return -EINVAL;
}
static void enable_hdmi(struct display_info_t const *dev)
{
imx_enable_hdmi_phy();
}
static int lvds_enabled;
static void enable_lvds(struct display_info_t const *dev)
{
if (lvds_enabled)
return;
/* ITE IT6251 power enable. */
gpio_direction_output(NOVENA_ITE6251_PWR_GPIO, 0);
mdelay(10);
gpio_direction_output(NOVENA_ITE6251_PWR_GPIO, 1);
mdelay(20);
lvds_enabled = 1;
}
static int detect_lvds(struct display_info_t const *dev)
{
int ret, loops = 250;
enable_lvds(dev);
ret = i2c_set_bus_num(NOVENA_IT6251_I2C_BUS);
if (ret) {
puts("Cannot select IT6251 I2C bus.\n");
return 0;
}
/* Wait up-to ~250 mS for the LVDS to come up. */
while (--loops) {
ret = it6251_ready();
if (ret)
return ret;
mdelay(1);
}
return 0;
}
struct display_info_t const displays[] = {
{
/* HDMI Output */
.bus = -1,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = detect_hdmi,
.enable = enable_hdmi,
.mode = {
.name = "HDMI",
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15384,
.left_margin = 220,
.right_margin = 40,
.upper_margin = 21,
.lower_margin = 7,
.hsync_len = 60,
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
},
}, {
/* LVDS Output: N133HSE-EA1 Rev. C1 */
.bus = -1,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = detect_lvds,
.enable = enable_lvds,
.mode = {
.name = "Chimei-FHD",
.refresh = 60,
.xres = 1920,
.yres = 1080,
.pixclock = 15384,
.left_margin = 148,
.right_margin = 88,
.upper_margin = 36,
.lower_margin = 4,
.hsync_len = 44,
.vsync_len = 5,
.sync = FB_SYNC_HOR_HIGH_ACT |
FB_SYNC_VERT_HIGH_ACT |
FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED,
},
},
};
size_t display_count = ARRAY_SIZE(displays);
static void enable_vpll(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
int timeout = 100000;
setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
clrsetbits_le32(&ccm->analog_pll_video,
BM_ANADIG_PLL_VIDEO_DIV_SELECT |
BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT,
BF_ANADIG_PLL_VIDEO_DIV_SELECT(37) |
BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1));
writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num);
writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom);
clrbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);
while (timeout--)
if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
break;
if (timeout < 0)
printf("Warning: video pll lock timeout!\n");
clrsetbits_le32(&ccm->analog_pll_video,
BM_ANADIG_PLL_VIDEO_BYPASS,
BM_ANADIG_PLL_VIDEO_ENABLE);
}
void setup_display_clock(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
enable_ipu_clock();
enable_vpll();
imx_setup_hdmi();
/* Turn on IPU LDB DI0 clocks */
setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);
/* Switch LDB DI0 to PLL5 (Video PLL) */
clrsetbits_le32(&mxc_ccm->cs2cdr,
MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK,
(0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
/* LDB clock div by 3.5 */
clrbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
/* DI0 clock derived from ldb_di0_clk */
clrsetbits_le32(&mxc_ccm->chsccdr,
MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK,
(CHSCCDR_CLK_SEL_LDB_DI0 <<
MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
);
/* Enable both LVDS channels, both connected to DI0. */
writel(IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH |
IOMUXC_GPR2_BIT_MAPPING_CH1_JEIDA |
IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT |
IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA |
IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
IOMUXC_GPR2_SPLIT_MODE_EN_MASK |
IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0 |
IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
&iomux->gpr[2]);
clrsetbits_le32(&iomux->gpr[3],
IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
IOMUXC_GPR3_LVDS1_MUX_CTL_MASK,
(IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET) |
(IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET)
);
}
void setup_display_lvds(void)
{
int ret;
ret = i2c_set_bus_num(NOVENA_IT6251_I2C_BUS);
if (ret) {
puts("Cannot select LVDS-to-eDP I2C bus.\n");
return;
}
/* The IT6251 should be ready now, if it's not, it's not connected. */
ret = it6251_ready();
if (!ret)
return;
/* Init the LVDS-to-eDP chip and if it succeeded, enable backlight. */
ret = it6251_init();
if (!ret) {
/* Backlight power enable. */
gpio_direction_output(NOVENA_BACKLIGHT_PWR_GPIO, 1);
/* PWM backlight pin, always on for full brightness. */
gpio_direction_output(NOVENA_BACKLIGHT_PWM_GPIO, 1);
}
}