u-boot/board/freescale/common/Makefile
Peng Fan f342c9e381 imx: dynamic setting mmcdev and mmcroot
Dynamic setting mmcdev and mmcroot.
Then when boot linux, we can have correct "root=/dev/mmcblk[x]p2"

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-12 19:10:43 +02:00

88 lines
2.3 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
MINIMAL=
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_INIT_MINIMAL
MINIMAL=y
endif
endif
ifdef MINIMAL
# necessary to create built-in.o
obj- := __dummy__.o
else
# include i2c_common.o once if either VID or FSL_USE_PCA9547_MUX
I2C_COMMON=
ifdef CONFIG_VID
I2C_COMMON=y
endif
ifdef CONFIG_FSL_USE_PCA9547_MUX
I2C_COMMON=y
endif
obj-$(CONFIG_FSL_CADMUS) += cadmus.o
obj-$(CONFIG_FSL_VIA) += cds_via.o
obj-$(CONFIG_FMAN_ENET) += fman.o
obj-$(CONFIG_FSL_PIXIS) += pixis.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o
endif
obj-$(I2C_COMMON) += i2c_common.o
obj-$(CONFIG_FSL_USE_PCA9547_MUX) += i2c_mux.o
obj-$(CONFIG_$(SPL_)VID) += vid.o
obj-$(CONFIG_FSL_QIXIS) += qixis.o
obj-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o
endif
obj-$(CONFIG_FSL_SGMII_RISER) += sgmii_riser.o
ifndef CONFIG_RAMBOOT_PBL
obj-$(CONFIG_FSL_FIXED_MMC_LOCATION) += sdhc_boot.o
endif
ifdef CONFIG_ARM
obj-$(CONFIG_DEEP_SLEEP) += arm_sleep.o
else
obj-$(CONFIG_DEEP_SLEEP) += mpc85xx_sleep.o
endif
obj-$(CONFIG_TARGET_MPC8548CDS) += cds_pci_ft.o
obj-$(CONFIG_TARGET_MPC8536DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P1022DS) += ics307_clk.o
obj-$(CONFIG_P2020DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P3041DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P4080DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P5040DS) += ics307_clk.o
obj-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o
obj-$(CONFIG_ZM7300) += zm7300.o
obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze.o
obj-$(CONFIG_POWER_MC34VR500) += mc34vr500.o
ifneq (,$(filter $(SOC), imx8ulp))
obj-y += mmc.o
endif
obj-$(CONFIG_LS102XA_STREAM_ID) += ls102xa_stream_id.o
obj-$(CONFIG_EMC2305) += emc2305.o
# deal with common files for P-series corenet based devices
obj-$(CONFIG_TARGET_P2041RDB) += p_corenet/
obj-$(CONFIG_TARGET_P3041DS) += p_corenet/
obj-$(CONFIG_TARGET_P4080DS) += p_corenet/
obj-$(CONFIG_TARGET_P5020DS) += p_corenet/
obj-$(CONFIG_TARGET_P5040DS) += p_corenet/
obj-$(CONFIG_LAYERSCAPE_NS_ACCESS) += ns_access.o
ifdef CONFIG_NXP_ESBC
obj-$(CONFIG_CMD_ESBC_VALIDATE) += fsl_validate.o cmd_esbc_validate.o
endif
obj-$(CONFIG_CHAIN_OF_TRUST) += fsl_chain_of_trust.o
endif