u-boot/arch/arm
Aradhya Bhatia 28e5e95bf8 arm: mach-k3: am62a7: Enable QoS for DSS
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to 8.

The C7x and VPAC have been overwhelming the DSS's access to the DDR
(when it was accessing via the Non Real-Time (NRT) Queue), primarily
because their functional frequencies, and hence DDR accesses, were
significantly higher than that of DSS. This led the display to flicker
when certain edgeAI models were being run.

With the DSS traffic serviced from the RT queue, the flickering issue
has been found to be mitigated.

The am62a qos files are auto generated from the k3 resource partitioning
tool.

Section-3.1.12, "QoS Programming Guide", in the AM62A TRM[1], provides
more information about the QoS, and section-14.1, "System Interconnect
Registers", provides the register descriptions.

[1] AM62A Tech Ref Manual: https://www.ti.com/lit/pdf/spruj16

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
2023-05-03 09:05:24 -04:00
..
cpu armv7: Use isb/dsb directly in start.S 2023-04-25 15:31:27 -04:00
dts arm: dts: msm: add GENI SE QUP device tree node 2023-05-02 14:23:59 -04:00
include gpio: axp/sunxi: Remove virtual VBUS detection GPIO 2023-04-28 01:30:24 +01:00
lib arm64: interrupts: print FAR_ELx on sync exceptions 2023-04-25 15:31:27 -04:00
mach-apple
mach-aspeed
mach-at91 global: Remove unused CONFIG defines 2023-01-20 12:27:06 -05:00
mach-bcm283x mmc: bcm2835-host: let firmware manage the clock divisor 2023-03-24 14:43:20 +00:00
mach-bcmbca
mach-bcmstb
mach-cortina
mach-davinci global: Migrate CONFIG_MAX_RAM_BANK_SIZE to CFG 2022-12-23 10:14:51 -05:00
mach-exynos Correct SPL use of EXYNOS7420 2023-02-09 16:32:26 -05:00
mach-highbank
mach-hpe arm: Correct cpu_reset function prototype on some platforms 2023-03-22 15:22:48 -04:00
mach-imx arm64: imx: Add support for imx8mp-beacon-kit 2023-04-04 09:40:25 +02:00
mach-integrator
mach-ipq40xx
mach-k3 arm: mach-k3: am62a7: Enable QoS for DSS 2023-05-03 09:05:24 -04:00
mach-keystone
mach-kirkwood arm: kirkwood: Move internal registers in arch_very_early_init() function 2023-03-24 13:11:47 +01:00
mach-lpc32xx
mach-mediatek arm: Correct cpu_reset function prototype on some platforms 2023-03-22 15:22:48 -04:00
mach-meson ARM: meson: switch AXG & GX dwc2 otg to DM 2023-01-20 16:21:31 +01:00
mach-mvebu arm: mvebu: spl: Allow to build SATA kwbimage for 4K Native disks 2023-04-13 11:34:47 +02:00
mach-nexell arm: s5p4418: dm_serial: remove old code / add DEBUG_UART 2023-01-02 16:06:08 -05:00
mach-npcm
mach-octeontx
mach-octeontx2
mach-omap2 arm: omap3: Directly use SMC #1 in lowlevel_init.S 2023-04-25 15:31:28 -04:00
mach-orion5x global: Migrate CONFIG_MAX_RAM_BANK_SIZE to CFG 2022-12-23 10:14:51 -05:00
mach-owl
mach-qemu
mach-rmobile ARM: renesas: Add R8A779G0 V4H White Hawk board code 2023-04-07 17:13:28 +02:00
mach-rockchip rockchip: rk3588: Sync sdmmc node from linux-next 2023-04-21 15:16:01 +08:00
mach-s5pc1xx exynos: Rework legacy PWM usage 2022-12-23 10:07:03 -05:00
mach-snapdragon clocks: qcs404: Add support for I2C clocks 2023-02-13 10:01:52 -05:00
mach-socfpga Use grep -E or plain grep instead of egrep 2023-01-11 15:02:24 -05:00
mach-sti
mach-stm32
mach-stm32mp stm32mp: fix various array bounds checks 2023-04-19 10:02:28 +02:00
mach-sunxi sunxi: arm64: boot0.h: runtime check for RVBAR address 2023-04-12 00:17:22 +01:00
mach-tegra ARM: tegra20: implement BCT patching 2023-02-23 12:55:37 -07:00
mach-u8500
mach-uniphier arm: uniphier: use DM_TIMER of arm a9 global timer 2023-01-02 16:01:39 -05:00
mach-versal xilinx: zynqmp: Add missing prototype for zynqmp_mmio_write 2023-03-09 13:15:00 +01:00
mach-versal-net xilinx: zynqmp: Add missing prototype for zynqmp_mmio_write 2023-03-09 13:15:00 +01:00
mach-versatile
mach-zynq
mach-zynqmp
mach-zynqmp-r5
thumb1/include/asm/proc-armv
config.mk arm: Centralize fixed register logic 2023-04-25 15:31:27 -04:00
Kconfig board: Add new Broadcom Northstar board 2023-05-02 14:23:58 -04:00
Kconfig.debug
Makefile