mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 15:37:23 +00:00
c69cda25c9
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
536 lines
12 KiB
C
536 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Modified to add driver model (DM) support
|
|
* Copyright (C) 2019 Marcel Ziswiler <marcel@ziswiler.com>
|
|
*
|
|
* Loosely based on the old code and Linux's PXA MMC driver
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/regs-mmc.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/io.h>
|
|
#include <dm.h>
|
|
#include <dm/platform_data/pxa_mmc_gen.h>
|
|
#include <malloc.h>
|
|
#include <mmc.h>
|
|
|
|
/* PXAMMC Generic default config for various CPUs */
|
|
#if defined(CONFIG_CPU_PXA25X)
|
|
#define PXAMMC_FIFO_SIZE 1
|
|
#define PXAMMC_MIN_SPEED 312500
|
|
#define PXAMMC_MAX_SPEED 20000000
|
|
#define PXAMMC_HOST_CAPS (0)
|
|
#elif defined(CONFIG_CPU_PXA27X)
|
|
#define PXAMMC_CRC_SKIP
|
|
#define PXAMMC_FIFO_SIZE 32
|
|
#define PXAMMC_MIN_SPEED 304000
|
|
#define PXAMMC_MAX_SPEED 19500000
|
|
#define PXAMMC_HOST_CAPS (MMC_MODE_4BIT)
|
|
#elif defined(CONFIG_CPU_MONAHANS)
|
|
#define PXAMMC_FIFO_SIZE 32
|
|
#define PXAMMC_MIN_SPEED 304000
|
|
#define PXAMMC_MAX_SPEED 26000000
|
|
#define PXAMMC_HOST_CAPS (MMC_MODE_4BIT | MMC_MODE_HS)
|
|
#else
|
|
#error "This CPU isn't supported by PXA MMC!"
|
|
#endif
|
|
|
|
#define MMC_STAT_ERRORS \
|
|
(MMC_STAT_RES_CRC_ERROR | MMC_STAT_SPI_READ_ERROR_TOKEN | \
|
|
MMC_STAT_CRC_READ_ERROR | MMC_STAT_TIME_OUT_RESPONSE | \
|
|
MMC_STAT_READ_TIME_OUT | MMC_STAT_CRC_WRITE_ERROR)
|
|
|
|
/* 1 millisecond (in wait cycles below it's 100 x 10uS waits) */
|
|
#define PXA_MMC_TIMEOUT 100
|
|
|
|
struct pxa_mmc_priv {
|
|
struct pxa_mmc_regs *regs;
|
|
};
|
|
|
|
/* Wait for bit to be set */
|
|
static int pxa_mmc_wait(struct mmc *mmc, uint32_t mask)
|
|
{
|
|
struct pxa_mmc_priv *priv = mmc->priv;
|
|
struct pxa_mmc_regs *regs = priv->regs;
|
|
unsigned int timeout = PXA_MMC_TIMEOUT;
|
|
|
|
/* Wait for bit to be set */
|
|
while (--timeout) {
|
|
if (readl(®s->stat) & mask)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
if (!timeout)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_mmc_stop_clock(struct mmc *mmc)
|
|
{
|
|
struct pxa_mmc_priv *priv = mmc->priv;
|
|
struct pxa_mmc_regs *regs = priv->regs;
|
|
unsigned int timeout = PXA_MMC_TIMEOUT;
|
|
|
|
/* If the clock aren't running, exit */
|
|
if (!(readl(®s->stat) & MMC_STAT_CLK_EN))
|
|
return 0;
|
|
|
|
/* Tell the controller to turn off the clock */
|
|
writel(MMC_STRPCL_STOP_CLK, ®s->strpcl);
|
|
|
|
/* Wait until the clock are off */
|
|
while (--timeout) {
|
|
if (!(readl(®s->stat) & MMC_STAT_CLK_EN))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
/* The clock refused to stop, scream and die a painful death */
|
|
if (!timeout)
|
|
return -ETIMEDOUT;
|
|
|
|
/* The clock stopped correctly */
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_mmc_start_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
uint32_t cmdat)
|
|
{
|
|
struct pxa_mmc_priv *priv = mmc->priv;
|
|
struct pxa_mmc_regs *regs = priv->regs;
|
|
int ret;
|
|
|
|
/* The card can send a "busy" response */
|
|
if (cmd->resp_type & MMC_RSP_BUSY)
|
|
cmdat |= MMC_CMDAT_BUSY;
|
|
|
|
/* Inform the controller about response type */
|
|
switch (cmd->resp_type) {
|
|
case MMC_RSP_R1:
|
|
case MMC_RSP_R1b:
|
|
cmdat |= MMC_CMDAT_R1;
|
|
break;
|
|
case MMC_RSP_R2:
|
|
cmdat |= MMC_CMDAT_R2;
|
|
break;
|
|
case MMC_RSP_R3:
|
|
cmdat |= MMC_CMDAT_R3;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Load command and it's arguments into the controller */
|
|
writel(cmd->cmdidx, ®s->cmd);
|
|
writel(cmd->cmdarg >> 16, ®s->argh);
|
|
writel(cmd->cmdarg & 0xffff, ®s->argl);
|
|
writel(cmdat, ®s->cmdat);
|
|
|
|
/* Start the controller clock and wait until they are started */
|
|
writel(MMC_STRPCL_START_CLK, ®s->strpcl);
|
|
|
|
ret = pxa_mmc_wait(mmc, MMC_STAT_CLK_EN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Correct and happy end */
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_mmc_cmd_done(struct mmc *mmc, struct mmc_cmd *cmd)
|
|
{
|
|
struct pxa_mmc_priv *priv = mmc->priv;
|
|
struct pxa_mmc_regs *regs = priv->regs;
|
|
u32 a, b, c;
|
|
int i;
|
|
int stat;
|
|
|
|
/* Read the controller status */
|
|
stat = readl(®s->stat);
|
|
|
|
/*
|
|
* Linux says:
|
|
* Did I mention this is Sick. We always need to
|
|
* discard the upper 8 bits of the first 16-bit word.
|
|
*/
|
|
a = readl(®s->res) & 0xffff;
|
|
for (i = 0; i < 4; i++) {
|
|
b = readl(®s->res) & 0xffff;
|
|
c = readl(®s->res) & 0xffff;
|
|
cmd->response[i] = (a << 24) | (b << 8) | (c >> 8);
|
|
a = c;
|
|
}
|
|
|
|
/* The command response didn't arrive */
|
|
if (stat & MMC_STAT_TIME_OUT_RESPONSE) {
|
|
return -ETIMEDOUT;
|
|
} else if (stat & MMC_STAT_RES_CRC_ERROR &&
|
|
cmd->resp_type & MMC_RSP_CRC) {
|
|
#ifdef PXAMMC_CRC_SKIP
|
|
if (cmd->resp_type & MMC_RSP_136 &&
|
|
cmd->response[0] & (1 << 31))
|
|
printf("Ignoring CRC, this may be dangerous!\n");
|
|
else
|
|
#endif
|
|
return -EILSEQ;
|
|
}
|
|
|
|
/* The command response was successfully read */
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_mmc_do_read_xfer(struct mmc *mmc, struct mmc_data *data)
|
|
{
|
|
struct pxa_mmc_priv *priv = mmc->priv;
|
|
struct pxa_mmc_regs *regs = priv->regs;
|
|
u32 len;
|
|
u32 *buf = (uint32_t *)data->dest;
|
|
int size;
|
|
int ret;
|
|
|
|
len = data->blocks * data->blocksize;
|
|
|
|
while (len) {
|
|
/* The controller has data ready */
|
|
if (readl(®s->i_reg) & MMC_I_REG_RXFIFO_RD_REQ) {
|
|
size = min(len, (uint32_t)PXAMMC_FIFO_SIZE);
|
|
len -= size;
|
|
size /= 4;
|
|
|
|
/* Read data into the buffer */
|
|
while (size--)
|
|
*buf++ = readl(®s->rxfifo);
|
|
}
|
|
|
|
if (readl(®s->stat) & MMC_STAT_ERRORS)
|
|
return -EIO;
|
|
}
|
|
|
|
/* Wait for the transmission-done interrupt */
|
|
ret = pxa_mmc_wait(mmc, MMC_STAT_DATA_TRAN_DONE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_mmc_do_write_xfer(struct mmc *mmc, struct mmc_data *data)
|
|
{
|
|
struct pxa_mmc_priv *priv = mmc->priv;
|
|
struct pxa_mmc_regs *regs = priv->regs;
|
|
u32 len;
|
|
u32 *buf = (uint32_t *)data->src;
|
|
int size;
|
|
int ret;
|
|
|
|
len = data->blocks * data->blocksize;
|
|
|
|
while (len) {
|
|
/* The controller is ready to receive data */
|
|
if (readl(®s->i_reg) & MMC_I_REG_TXFIFO_WR_REQ) {
|
|
size = min(len, (uint32_t)PXAMMC_FIFO_SIZE);
|
|
len -= size;
|
|
size /= 4;
|
|
|
|
while (size--)
|
|
writel(*buf++, ®s->txfifo);
|
|
|
|
if (min(len, (uint32_t)PXAMMC_FIFO_SIZE) < 32)
|
|
writel(MMC_PRTBUF_BUF_PART_FULL, ®s->prtbuf);
|
|
}
|
|
|
|
if (readl(®s->stat) & MMC_STAT_ERRORS)
|
|
return -EIO;
|
|
}
|
|
|
|
/* Wait for the transmission-done interrupt */
|
|
ret = pxa_mmc_wait(mmc, MMC_STAT_DATA_TRAN_DONE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Wait until the data are really written to the card */
|
|
ret = pxa_mmc_wait(mmc, MMC_STAT_PRG_DONE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_mmc_send_cmd_common(struct pxa_mmc_priv *priv, struct mmc *mmc,
|
|
struct mmc_cmd *cmd, struct mmc_data *data)
|
|
{
|
|
struct pxa_mmc_regs *regs = priv->regs;
|
|
u32 cmdat = 0;
|
|
int ret;
|
|
|
|
/* Stop the controller */
|
|
ret = pxa_mmc_stop_clock(mmc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* If we're doing data transfer, configure the controller accordingly */
|
|
if (data) {
|
|
writel(data->blocks, ®s->nob);
|
|
writel(data->blocksize, ®s->blklen);
|
|
/* This delay can be optimized, but stick with max value */
|
|
writel(0xffff, ®s->rdto);
|
|
cmdat |= MMC_CMDAT_DATA_EN;
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
cmdat |= MMC_CMDAT_WRITE;
|
|
}
|
|
|
|
/* Run in 4bit mode if the card can do it */
|
|
if (mmc->bus_width == 4)
|
|
cmdat |= MMC_CMDAT_SD_4DAT;
|
|
|
|
/* Execute the command */
|
|
ret = pxa_mmc_start_cmd(mmc, cmd, cmdat);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Wait until the command completes */
|
|
ret = pxa_mmc_wait(mmc, MMC_STAT_END_CMD_RES);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Read back the result */
|
|
ret = pxa_mmc_cmd_done(mmc, cmd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* In case there was a data transfer scheduled, do it */
|
|
if (data) {
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
pxa_mmc_do_write_xfer(mmc, data);
|
|
else
|
|
pxa_mmc_do_read_xfer(mmc, data);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_mmc_set_ios_common(struct pxa_mmc_priv *priv, struct mmc *mmc)
|
|
{
|
|
struct pxa_mmc_regs *regs = priv->regs;
|
|
u32 tmp;
|
|
u32 pxa_mmc_clock;
|
|
|
|
if (!mmc->clock) {
|
|
pxa_mmc_stop_clock(mmc);
|
|
return 0;
|
|
}
|
|
|
|
/* PXA3xx can do 26MHz with special settings. */
|
|
if (mmc->clock == 26000000) {
|
|
writel(0x7, ®s->clkrt);
|
|
return 0;
|
|
}
|
|
|
|
/* Set clock to the card the usual way. */
|
|
pxa_mmc_clock = 0;
|
|
tmp = mmc->cfg->f_max / mmc->clock;
|
|
tmp += tmp % 2;
|
|
|
|
while (tmp > 1) {
|
|
pxa_mmc_clock++;
|
|
tmp >>= 1;
|
|
}
|
|
|
|
writel(pxa_mmc_clock, ®s->clkrt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_mmc_init_common(struct pxa_mmc_priv *priv, struct mmc *mmc)
|
|
{
|
|
struct pxa_mmc_regs *regs = priv->regs;
|
|
|
|
/* Make sure the clock are stopped */
|
|
pxa_mmc_stop_clock(mmc);
|
|
|
|
/* Turn off SPI mode */
|
|
writel(0, ®s->spi);
|
|
|
|
/* Set up maximum timeout to wait for command response */
|
|
writel(MMC_RES_TO_MAX_MASK, ®s->resto);
|
|
|
|
/* Mask all interrupts */
|
|
writel(~(MMC_I_MASK_TXFIFO_WR_REQ | MMC_I_MASK_RXFIFO_RD_REQ),
|
|
®s->i_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
static int pxa_mmc_init(struct mmc *mmc)
|
|
{
|
|
struct pxa_mmc_priv *priv = mmc->priv;
|
|
|
|
return pxa_mmc_init_common(priv, mmc);
|
|
}
|
|
|
|
static int pxa_mmc_request(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct pxa_mmc_priv *priv = mmc->priv;
|
|
|
|
return pxa_mmc_send_cmd_common(priv, mmc, cmd, data);
|
|
}
|
|
|
|
static int pxa_mmc_set_ios(struct mmc *mmc)
|
|
{
|
|
struct pxa_mmc_priv *priv = mmc->priv;
|
|
|
|
return pxa_mmc_set_ios_common(priv, mmc);
|
|
}
|
|
|
|
static const struct mmc_ops pxa_mmc_ops = {
|
|
.send_cmd = pxa_mmc_request,
|
|
.set_ios = pxa_mmc_set_ios,
|
|
.init = pxa_mmc_init,
|
|
};
|
|
|
|
static struct mmc_config pxa_mmc_cfg = {
|
|
.name = "PXA MMC",
|
|
.ops = &pxa_mmc_ops,
|
|
.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
|
|
.f_max = PXAMMC_MAX_SPEED,
|
|
.f_min = PXAMMC_MIN_SPEED,
|
|
.host_caps = PXAMMC_HOST_CAPS,
|
|
.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT,
|
|
};
|
|
|
|
int pxa_mmc_register(int card_index)
|
|
{
|
|
struct mmc *mmc;
|
|
struct pxa_mmc_priv *priv;
|
|
u32 reg;
|
|
int ret = -ENOMEM;
|
|
|
|
priv = malloc(sizeof(struct pxa_mmc_priv));
|
|
if (!priv)
|
|
goto err0;
|
|
|
|
memset(priv, 0, sizeof(*priv));
|
|
|
|
switch (card_index) {
|
|
case 0:
|
|
priv->regs = (struct pxa_mmc_regs *)MMC0_BASE;
|
|
break;
|
|
case 1:
|
|
priv->regs = (struct pxa_mmc_regs *)MMC1_BASE;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
printf("PXA MMC: Invalid MMC controller ID (card_index = %d)\n",
|
|
card_index);
|
|
goto err1;
|
|
}
|
|
|
|
#ifndef CONFIG_CPU_MONAHANS /* PXA2xx */
|
|
reg = readl(CKEN);
|
|
reg |= CKEN12_MMC;
|
|
writel(reg, CKEN);
|
|
#else /* PXA3xx */
|
|
reg = readl(CKENA);
|
|
reg |= CKENA_12_MMC0 | CKENA_13_MMC1;
|
|
writel(reg, CKENA);
|
|
#endif
|
|
|
|
mmc = mmc_create(&pxa_mmc_cfg, priv);
|
|
if (!mmc)
|
|
goto err1;
|
|
|
|
return 0;
|
|
|
|
err1:
|
|
free(priv);
|
|
err0:
|
|
return ret;
|
|
}
|
|
#else /* !CONFIG_IS_ENABLED(DM_MMC) */
|
|
static int pxa_mmc_probe(struct udevice *dev)
|
|
{
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct pxa_mmc_plat *plat = dev_get_plat(dev);
|
|
struct mmc_config *cfg = &plat->cfg;
|
|
struct mmc *mmc = &plat->mmc;
|
|
struct pxa_mmc_priv *priv = dev_get_priv(dev);
|
|
u32 reg;
|
|
|
|
upriv->mmc = mmc;
|
|
|
|
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
cfg->f_max = PXAMMC_MAX_SPEED;
|
|
cfg->f_min = PXAMMC_MIN_SPEED;
|
|
cfg->host_caps = PXAMMC_HOST_CAPS;
|
|
cfg->name = dev->name;
|
|
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
mmc->priv = priv;
|
|
|
|
priv->regs = plat->base;
|
|
|
|
#ifndef CONFIG_CPU_MONAHANS /* PXA2xx */
|
|
reg = readl(CKEN);
|
|
reg |= CKEN12_MMC;
|
|
writel(reg, CKEN);
|
|
#else /* PXA3xx */
|
|
reg = readl(CKENA);
|
|
reg |= CKENA_12_MMC0 | CKENA_13_MMC1;
|
|
writel(reg, CKENA);
|
|
#endif
|
|
|
|
return pxa_mmc_init_common(priv, mmc);
|
|
}
|
|
|
|
static int pxa_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct pxa_mmc_plat *plat = dev_get_plat(dev);
|
|
struct pxa_mmc_priv *priv = dev_get_priv(dev);
|
|
|
|
return pxa_mmc_send_cmd_common(priv, &plat->mmc, cmd, data);
|
|
}
|
|
|
|
static int pxa_mmc_set_ios(struct udevice *dev)
|
|
{
|
|
struct pxa_mmc_plat *plat = dev_get_plat(dev);
|
|
struct pxa_mmc_priv *priv = dev_get_priv(dev);
|
|
|
|
return pxa_mmc_set_ios_common(priv, &plat->mmc);
|
|
}
|
|
|
|
static const struct dm_mmc_ops pxa_mmc_ops = {
|
|
.get_cd = NULL,
|
|
.send_cmd = pxa_mmc_send_cmd,
|
|
.set_ios = pxa_mmc_set_ios,
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(BLK)
|
|
static int pxa_mmc_bind(struct udevice *dev)
|
|
{
|
|
struct pxa_mmc_plat *plat = dev_get_plat(dev);
|
|
|
|
return mmc_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
#endif
|
|
|
|
U_BOOT_DRIVER(pxa_mmc) = {
|
|
#if CONFIG_IS_ENABLED(BLK)
|
|
.bind = pxa_mmc_bind,
|
|
#endif
|
|
.id = UCLASS_MMC,
|
|
.name = "pxa_mmc",
|
|
.ops = &pxa_mmc_ops,
|
|
.priv_auto = sizeof(struct pxa_mmc_priv),
|
|
.probe = pxa_mmc_probe,
|
|
};
|
|
#endif /* !CONFIG_IS_ENABLED(DM_MMC) */
|